9 results
Search Results
Now showing 1 - 9 of 9
- ItemRevealing all states of dewetting of a thin gold layer on a silicon surface by nanosecond laser conditioning(Amsterdam : Elsevier, 2021) Ernst, Owen C.; Uebel, David; Kayser, Stefan; Lange, Felix; Teubner, Thomas; Boeck, TorstenDewetting is a ubiquitous phenomenon which can be applied to the laser synthesis of nanoparticles. A classical spinodal dewetting process takes place in four successive states, which differ from each other in their morphology. In this study all states are revealed by interaction of pulsed nanosecond UV laser light with thin gold layers with thicknesses between 1 nm and 10 nm on (100) silicon wafers. The specific morphologies of the dewetting states are discussed with particular emphasis on the state boundaries. The main parameter determining which state is formed is not the duration for which the gold remains liquid, but rather the input energy provided by the laser. This shows that each state transition has a separate measurable activation energy. The temperature during the nanosecond pulses and the duration during which the gold remains liquid was determined by simulation using the COMSOL Multiphysics® software package. Using these calculations, an accurate local temperature profile and its development over time was simulated. An analytical study of the morphologies and formed structures was performed using Minkowski measures. With aid of this tool, the laser induced structures were compared with thermally annealed samples, with perfectly ordered structures and with perfectly random structures. The results show that both, structures of the laser induced and the annealed samples, strongly resemble the perfectly ordered structures. This reveals a close relationship between these structures and suggests that the phenomenon under investigation is indeed a spinodal dewetting generated by an internal material wave function. The purposeful generation of these structures and the elucidation of the underlying mechanism of dewetting by short pulse lasers may assist the realisation of various technical elements such as nanowires in science and industry. © 2020
- ItemIn situ grown palladium nanoparticles on polyester fabric as easy-separable and recyclable catalyst for Suzuki-Miyaura reaction(Amsterdam : Elsevier, 2021) Xu, Tiefeng; Lu, Panting; Wohlrab, Sebastian; Chen, Wenxing; Springer, Armin; Wu, Xiao-Feng; Lu, WangyangPalladium nanoparticles supported on low-melting polyester (Pd/LMPET) fabric were prepared through a microwave irradiation assisted method. In this way, in situ growth of Pd nanoparticles onto an easy to handle material was initiated and proceeded. The results of the characterization revealed that the palladium nanoparticles were well-dispersed on the surfaces of the polyester fibers. The Pd/LMPET fabrics were then employed in the Suzuki-Miyaura coupling. They exhibited excellent catalytic activity in ethanol/water under air atmosphere at 50 °C. Importantly, the Pd/LMPET fabrics could be separated from reaction mixture conveniently and they can still maintain good activity after 8 cycles without Pd leaching. © 2021 The Authors
- ItemAerobic iron-catalyzed site-selective C(sp3)–C(sp3) bond cleavage in N-heterocycles(Amsterdam : Elsevier, 2021) Leonard, David K.; Li, Wu; Rockstroh, Nils; Junge, Kathrin; Beller, MatthiasThe kinetic and thermodynamic stability of C(sp3)–C(sp3) bonds makes the site-selective activation of these motifs a real synthetic challenge. In view of this, herein a site-selective method of C(sp3)–C(sp3) bond scission of amines, specifically morpholine and piperazine derivatives, using a cheap iron catalyst and air as a sustainable oxidant is reported. Furthermore, a statistical design of experiments (DoE) is used to evaluate multiple reaction parameters thereby allowing for the rapid development of a catalytic process. © 2021
- ItemNickel-catalyzed carbonylative synthesis of dihydrobenzofurans(Amsterdam : Elsevier, 2021) Geng, H.-Q.; Wang, W.; Wu, X.-F.A nickel-catalyzed carbonylative synthesis of dihydrobenzofurans has been developed. With Mo(CO)6 as the CO source and manganese metal as the reductant, alkyl halides were reacted with aryl iodides to give the desired products in moderate to good yields. © 2020 Elsevier B.V.
- ItemVerification of impurity-related photocatalytic activity of insulating oxide supports(Amsterdam : Elsevier, 2021) Kortewille, Bianca; Springer, Armin; Strunk, JenniferPhotocatalysts composed of vanadium oxide species supported on commercial MgO and ZrO2 are investigated in selective methanol oxidation. Both support oxides are insulators, so the vanadium oxide species are expected as sole active component in photocatalysis. However, the pure supports showed considerable activity: Bare MgO was more active than MgO-supported vanadia catalysts, and ZrO2 showed intermediate activity. By various characterization methods, the presence of TiO2 (anatase) in the MgO support, and the presence of Zn, possibly as ZnO, in ZrO2 is demonstrated. The present study highlights that photocatalysts containing commercial supports must be carefully checked for impurity-related photocatalytic performance. © 2021 The Authors
- ItemEnhancement and limits of the selective oxidation of methane to formaldehyde over V-SBA-15: Influence of water cofeed and product decomposition(Amsterdam : Elsevier, 2021) Kunkel, Benny; Wohlrab, SebastianThe possibility of a selective catalytic oxidation of methane to formaldehyde has been known for decades, and positive influences of water added to the reaction mixture and ultra-short contact times have been reported. In the present work, the complexity of interdependencies has been revealed. Specific parameter variations can increase conversion and selectivity of the target product. Surprisingly, formaldehyde formation over VOx species and its decomposition in gas phase were equally dependent on the partial pressure of the added water, so that the sweet spot can only be found by varying the residence time. © 2021 The Author(s)
- ItemHeat accumulation during femtosecond laser treatment at high repetition rate – A morphological, chemical and crystallographic characterization of self-organized structures on Ti6Al4V(Amsterdam : Elsevier, 2021) Schnell, Georg; Lund, Henrik; Bartling, Stephan; Polley, Christian; Riaz, Abdullah; Senz, Volkmar; Springer, Armin; Seitz, HermannThis study presents a detailed characterization of self-organized nano- and microstructures on Ti6Al4V evoked by different scanning strategies and fluences with a 300 fs laser operating at a laser wavelength of 1030 nm. The resulting surface morphology was visualized via field emission scanning electron microscopy (FEG-SEM) images of the surface and cross-sections. X-ray diffraction (XRD)-analysis was performed to analyse changes in crystal structures. The chemical surface composition of the near-surface layer was determined by X-ray photoelectron spectroscopy (XPS). Results show a significant influence of heat accumulation while processing with high laser repetition rates on the formation, crystallinity and chemical composition of self-organized structures depending on the scanning strategy. The ablation with different laser scanning strategies led to varying dynamics of growth-mechanisms of self-organized structures, formation of intermetallic phases (Ti3Al), sub-oxides and oxides (Ti6O, TiO) as well as ions (Ti3+, Ti4+) in surface layer reliant on applied fluence. Furthermore, investigations revealed a heat-affected zone up to several micrometers in non-ablated material. © 2021 The Authors
- ItemOn the viscous dissipation caused by randomly rough indenters in smooth sliding motion(Amsterdam : Elsevier, 2021) Sukhomlinov, Sergey; Müser, Martin H.The viscous dissipation between rigid, randomly rough indenters and linearly elastic counter bodies sliding past them is investigated using Green’s function molecular dynamics. The study encompasses a variety of models differing in the height spectra properties of the rigid indenter, in the viscoelasticity of the elastomer, and in their interaction. All systems reveal the expected damping linear in sliding velocity at small and a pronounced maximum at intermediate . Persson’s theory of rubber friction, which is adopted to the studied model systems, reflects all observed trends. However, close quantitative agreement is only found up to intermediate sliding velocities. Relative errors in the friction force become significant once the contact area is substantially reduced by sliding.
- ItemDry etching of monocrystalline silicon using a laser-induced reactive micro plasma(Amsterdam : Elsevier, 2021) Heinke, Robert; Ehrhardt, Martin; Lorenz, Pierre; Zimmer, KlausDry etching is a prevalent technique for pattern transfer and material removal in microelectronics, optics and photonics due to its high precision material removal with low surface and subsurface damage. These processes, including reactive ion etching (RIE) and plasma etching (PE), are performed at vacuum conditions and provide high selectivity and vertical side wall etched patterns but create high costs and efforts in maintenance due to the required machinery. In contrast to electrically generated plasmas, laser-induced micro plasmas are controllable sources of reactive species in gases at atmospheric pressure that can be used for dry etching of materials. In the present study, we have demonstrated the laser-induced plasma etching of monocrystalline silicon. A Ti:Sapphire laser has been used for igniting an optically pumped plasma in a CF4/O2 gas mixture near atmospheric pressure. The influence of process parameters, like substrate temperature, O2 concentration, plasma-surface distance, etching duration, pulse energy and crystal orientation on etching rate and surface morphology has been investigated. Typical etching rates of 2–12 µm x min−1 can be achieved by varying mentioned parameters with a decreasing etching rate during the process. Different morphologies can be observed due to the parameters set, smooth as well as rough surfaces or even inverted pyramids. The presented etching method provides an approach for precise machining of silicon surfaces with good surface qualities near atmospheric pressure and sufficiently high material removal rates for ultraprecise surface machining. © 2021 The Author(s)