29 results
Search Results
Now showing 1 - 10 of 29
- ItemA coaxial dielectric barrier discharge reactor for treatment of winter wheat seeds(Basel : MDPI, 2020) Nishime, Thalita M. C.; Wannicke, Nicola; Horn, Stefan; Weltmann, Klaus-Dieter; Brust, HenrikeNon-thermal atmospheric pressure plasmas have been recently explored for their potential usage in agricultural applications as an interesting alternative solution for a potential increase in food production with a minor impact on the ecosystem. However, the adjustment and optimization of plasma sources for agricultural applications in general is an important study that is commonly overlooked. Thus, in the present work, a dielectric barrier discharge (DBD) reactor with coaxial geometry designed for the direct treatment of seeds is presented and investigated. To ensure reproducible and homogeneous treatment results, the reactor mechanically shakes the seeds during treatment, and ambient air is admixed while the discharge runs. The DBD, operating with argon and helium, produces two different chemically active states of the system for seed modification. The temperature evolution was monitored to guarantee a safe manipulation of seeds, whereas a physiological temperature was assured by controlling the exposure time. Both treatments led to a remarkable increase in wettability and acceleration in germination. The present study showed faster germination acceleration (60% faster after 24 h) and a lower water contact angle (WCA) (82% reduction) for winter wheat seeds by using the described argon discharge (with air impurities). Furthermore, the treatment can be easily optimized by adjusting the electrical parameters. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemInternal Crack Initiation and Growth Starting from Artificially Generated Defects in Additively Manufactured Ti6Al4V Specimen in the VHCF Regime(Basel : MDPI, 2021) Wickmann, Carsten; Benz, Christopher; Heyer, Horst; Witte-Bodnar, Kerstin; Schäfer, Jan; Sander, ManuelaThe aim of the present work was to investigate the ‘fine granular area’ (FGA) formation based on artificially generated internal defects in additively manufactured Ti6Al4V specimens in the early stage of fatigue crack growth in the ‘very high cycle fatigue’ (VHCF) regime. Fatigue tests were performed with constant amplitude at pure tension-compression loading (R = −1) using an ultrasonic fatigue testing setup. Failed specimens were investigated using optical microscopy, high-resolution ‘scanning electron microscopy’ (SEM), and ‘focused ion beam’ (FIB) techniques. Further, the paper introduces alternative proposals to identify the FGA layer beneath the fracture surfaces in terms of the ‘cross section polishing’ (CSP) technique and metallic grindings with special attention paid to the crack origin, the surrounding microstructure, and the expansion of the nanograin layer beneath the fracture surface. Different existing fracture mechanical approaches were applied to evaluate if an FGA formation is possible. Moreover, the results were discussed in comparison to the experimental findings.
- ItemMixed Ionic-Electronic Conductivity, Redox Behavior and Thermochemical Expansion of Mn-Substituted 5YSZ as an Interlayer Material for Reversible Solid Oxide Cells(Basel : MDPI, 2021) Natoli, Alejandro; Arias-Serrano, Blanca I.; Rodríguez-Castellón, Enrique; Żurawska, Agnieszka; Frade, Jorge R.; Yaremchenko, Aleksey. A.Manganese-substituted 5 mol.% yttria-stabilized zirconia (5YSZ) was explored as a prospective material for protective interlayers between electrolyte and oxygen electrodes in reversible solid oxide fuel/electrolysis cells. [(ZrO2)0.95(Y2O3)0.05]1−x[MnOy]x (x = 0.05, 0.10 and 0.15) ceramics with cubic fluorite structure were sintered in air at 1600 °C. The characterization included X-ray diffraction (XRD), scanning electron microscopy (SEM)/energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), thermogravimetry and dilatometry in controlled atmospheres, electrical conductivity measurements, and determination of oxygen-ion transference numbers by the electromotive force (EMF) technique. Mn-substituted 5YSZ solid solutions exhibit variable oxygen nonstoichiometry with manganese cations in a mixed 2+/3+ oxidation state under oxidizing conditions. Substitution by manganese gradually increases the extent of oxygen content variation on thermal/redox cycling, chemical contribution to thermal expansion and dimensional changes on reduction. It also deteriorates oxygen-ionic conductivity and improves p-type electronic conductivity under oxidizing conditions, leading to a gradual transformation from predominantly ionic to prevailing electronic transport with increasing x. Mn2+/3+→Mn2+ transformation under reducing atmospheres is accompanied by the suppression of electronic transport and an increase in ionic conductivity. All Mn-substituted 5YSZ ceramics are solid electrolytes under reducing conditions. Prolonged treatments in reducing atmospheres, however, promote microstructural changes at the surface of bulk ceramics and Mn exsolution. Mn-substituted 5YSZ with 0.05 ≤ x < 0.10 is considered the most suitable for the interlayer application, due to the best combination of relevant factors, including oxygen content variations, levels of ionic/electronic conductivity and thermochemical expansion.
- ItemTunable Pseudo-Piezoelectric Effect in Doped Calcium Titanate for Bone Tissue Engineering(Basel : MDPI, 2021) Riaz, Abdullah; Witte, Kerstin; Bodnar, Wiktor; Seitz, Hermann; Schell, Norbert; Springer, Armin; Burkel, EberhardCaTiO3 is a promising candidate as a pseudo-piezoelectric scaffold material for bone implantation. In this study, pure and magnesium/iron doped CaTiO3 are synthesized by sol-gel method and spark plasma sintering. Energy dispersive X-ray mapping confirm the homogenous distribution of doping elements in sintered samples. High-energy X-ray diffraction investigations reveal that doping of nanostructured CaTiO3 increased the strain and defects in the structure of CaTiO3 compared to the pure one. This led to a stronger pseudo-piezoelectric effect in the doped samples. The charge produced in magnesium doped CaTiO3 due to the direct piezoelectric effect is (2.9 ± 0.1) pC which was larger than the one produced in pure CaTiO3 (2.1 ± 0.3) pC, whereas the maximum charge was generated by iron doped CaTiO3 with (3.6 ± 0.2) pC. Therefore, the pseudo-piezoelectric behavior can be tuned by doping. This tuning of pseudo-piezoelectric response provides the possibility to systematically study the bone response using different piezoelectric strengths and possibly adjust for bone tissue engineering.
- ItemDevelopment of Ni-Sr(V,Ti)O3-δ Fuel Electrodes for Solid Oxide Fuel Cells(Basel : MDPI, 2021) Serôdio Costa, Bernardo F.; Arias-Serrano, Blanca I.; Yaremchenko, Aleksey A.A series of strontium titanates-vanadates (STVN) with nominal cation composition Sr1-xTi1-y-zVyNizO3-δ (x = 0–0.04, y = 0.20–0.40 and z = 0.02–0.12) were prepared by a solid-state reaction route in 10% H2–N2 atmosphere and characterized under reducing conditions as potential fuel electrode materials for solid oxide fuel cells. Detailed phase evolution studies using XRD and SEM/EDS demonstrated that firing at temperatures as high as 1200◦C is required to eliminate undesirable secondary phases. Under such conditions, nickel tends to segregate as a metallic phase and is unlikely to incorporate into the perovskite lattice. Ceramic samples sintered at 1500◦C ex-hibited temperature-activated electrical conductivity that showed a weak p(O2 ) dependence and increased with vanadium content, reaching a maximum of ~17 S/cm at 1000◦C. STVN ceramics showed moderate thermal expansion coefficients (12.5–14.3 ppm/K at 25–1100◦C) compatible with that of yttria-stabilized zirconia (8YSZ). Porous STVN electrodes on 8YSZ solid electrolytes were fabricated at 1100◦C and studied using electrochemical impedance spectroscopy at 700–900◦C in an atmosphere of diluted humidified H2 under zero DC conditions. As-prepared STVN electrodes demonstrated comparatively poor electrochemical performance, which was attributed to insufficient intrinsic electrocatalytic activity and agglomeration of metallic nickel during the high-temperature synthetic procedure. Incorporation of an oxygen-ion-conducting Ce0.9Gd0.1O2-δ phase (20–30 wt.%) and nano-sized Ni as electrocatalyst (≥1 wt.%) into the porous electrode structure via infiltration re-sulted in a substantial improvement in electrochemical activity and reduction of electrode polarization resistance by 6–8 times at 900◦C and ≥ one order of magnitude at 800◦C.
- ItemGSH modification as a marker for plasma source and biological response comparison to plasma treatment(Basel : MDPI, 2020) Ranieri, Pietro; Mohamed, Hager; Myers, Brayden; Dobossy, Leah; Beyries, Keely; Trosan, Duncan; Krebs, Fred C.; Miller, Vandana; Stapelmann, KatharinaThis study investigated the use of glutathione as a marker to establish a correlation between plasma parameters and the resultant liquid chemistry from two distinct sources to predefined biological outcomes. Two different plasma sources were operated at parameters that resulted in similar biological responses: cell viability, mitochondrial activity, and the cell surface display of calreticulin. Specific glutathione modifications appeared to be associated with biological responses elicited by plasma. These modifications were more pronounced with increased treatment time for the European Cooperation in Science and Technology Reference Microplasma Jet (COST-Jet) and increased frequency for the dielectric barrier discharge and were correlated with more potent biological responses. No correlations were found when cells or glutathione were exposed to exogenously added long-lived species alone. This implied that short-lived species and other plasma components were required for the induction of cellular responses, as well as glutathione modifications. These results showed that comparisons of medical plasma sources could not rely on measurements of long-lived chemical species; rather, modifications of biomolecules (such as glutathione) might be better predictors of cellular responses to plasma exposure. © 2020 by the authors.
- ItemPlasma‐treated flammulina velutipes‐derived extract showed anticancer potential in human breast cancer cells(Basel : MDPI, 2020) Mitra, Sarmistha; Bhartiya, Pradeep; Kaushik, Neha; Nguyen, Linh Nhat; Wahab, Rizwan; Bekeschus, Sander; Choi, Eun Ha; Kaushik, Nagendra KumarNatural products with medicinal properties are among alternative therapies of interest due to their high body tolerance. We aimed to determine whether nonthermal gas plasma could enhance the medicinal value of Flammulina velutipes mushrooms. Generated gas plasma was characterized by its emission spectrum in ambient air, pH, temperature, and H2O2 and NOx concentrations after exposure for various periods. Phenolic and flavonoid contents in the extracts were measured using antioxidant assays and Fourier transform infrared and ultraviolet‐visible spectroscopy. We analyzed the effects of the plasma‐treated mushroom‐derived extracts against breast carcinoma using the MCF7 and MDA‐MB231 cell lines. The extracts significantly and concentration dependently inhibited the growth of breast cancer cells without inducing toxicity in normal MCF10A cells, and induced apoptosis via oxidative stress, evidenced by DNA damage (γ‐ H2AX foci formation), and increased the population of MCF7 breast cancer cells arrested in the G2/M phase of the cell cycle. The extracts also induced mitochondrion‐mediated apoptosis of MCF7 cells through cytochrome c release and caspase cleavage activity. The plasma improved the biological activity of mushrooms by increasing their phenolic compounds that prevented the growth of breast cancer cells in vitro. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemConcept for improved handling ensures effective contactless plasma treatment of patients with kINPen® MED(Basel : MDPI, 2020) Hahn, Veronika; Grollmisch, Daniel; Bendt, Hannes; Woedtke, Thomas von; Nestler, Bodo; Weltmann, Klaus-Dieter; Gerling, TorstenThe nursing of patients with wounds is an essential part of medical healthcare. In this context, cold atmospheric-pressure plasma sources can be applied for skin decontamination and stimulation of wound healing. One of these plasma devices is the commercially available kINPen® MED (neoplas tools GmbH), a cold atmospheric-pressure plasma jet which is approved as a medical device, class-IIa. For the plasma treatment, a sterile disposable spacer is recommended to ensure a constant and effective distance between plasma and skin. The disadvantage of this spacer is its form and size which means that the effective axis/area is not visible for the attending doctor or qualified personnel and consequently it is a more or less intuitive treatment. In addition, the suggested perpendicular treatment is not applicable for the attending specialist due to lack of space or patient/wound positioning. A concept of a sensory unit was developed to measure the treatment distance and to visualize the effective treatment area for different angles. To determine the effective area for the plasma treatment, some exemplary methods were performed. Thus, the antimicrobial (Staphylococcus aureus DSM799/ATCC6538) efficacy, reactive oxygen species (ROS) distribution and (vacuum) ultraviolet ((V)UV) irradiation were determined depending on the treatment angle. Finally, a simplified first approach to visualize the effective treatment area at an optimal distance was designed and constructed to train attending specialists for optimal wound area coverage. © 2020 by the authors.
- ItemCharacterization and Optimization of a Conical Corona Reactor for Seed Treatment of Rapeseed(Basel : MDPI, 2022) Nishime, Thalita M. C.; Werner, Jasmin; Wannicke, Nicola; Mui, Taiana S. M.; Kostov, Konstantin G.; Weltmann, Klaus-Dieter; Brust, HenrikePlasma agriculture is a growing field that combines interdisciplinary areas with the aim of researching alternative solutions for increasing food production. In this field, plasma sources are used for the treatment of different agricultural goods in pre-and post-harvest. With the big variety of possible treatment targets, studied reactors must be carefully investigated and characterized for specific goals. Therefore, in the present study, a cone-shaped corona reactor working with argon was adapted for the treatment of small seeds, and its basic properties were investigated. The treatment of rapeseed using different voltage duty cycles led to an increase in surface wettability, possibly contributing to the accelerated germination (27% for 90% duty cycle). The discharge produced by the conical reactor was able to provide an environment abundant with reactive oxygen species that makes the process suitable for seeds treatment. However, operating in direct treatment configuration, large numbers of seeds placed in the reactor start impairing the discharge homogeneity.
- ItemAutomatic Actin Filament Quantification and Cell Shape Modeling of Osteoblasts on Charged Ti Surfaces(Basel : MDPI, 2021) Gruening, Martina; Dawson, Jonathan E.; Voelkner, Christian; Neuber, Sven; Fricke, Katja; van Rienen, Ursula; Speller, Sylvia; Helm, Christiane A.; Nebe, J. BarbaraSurface charges at the cell–biomaterial interface are known to determine cellular functions. Previous findings on cell signaling indicate that osteoblastic cells favor certain moderately positive surface charges, whereas highly positive charges are not tolerated. In this study, we aimed to gain deeper insights into the influence exerted by surface charges on the actin cytoskeleton and the cell shape. We analyzed surfaces with a negative, moderately positive, and highly positive zeta (ζ) potential: titanium (Ti), Ti with plasma polymerized allylamine (PPAAm), and Ti with a polydiallyldimethylammonium chloride (PDADMA) multilayer, respectively. We used the software FilaQuant for automatic actin filament quantification of osteoblastic MG-63s, analyzed the cell edge height with scanning ion conductance microscopy (SICM), and described the cellular shape via a mathematical vertex model. A significant enhancement of actin filament formation was achieved on moderately positive (+7 mV) compared with negative ζ-potentials (−87 mV). A hampered cell spreading was reflected in a diminished actin filament number and length on highly positively charged surfaces (+50 mV). Mathematical simulations suggested that in these cells, cortical tension forces dominate the cell–substrate adhesion forces. Our findings present new insights into the impact of surface charges on the overall cell shape and even intracellular structures.
- «
- 1 (current)
- 2
- 3
- »