9 results
Search Results
Now showing 1 - 9 of 9
- ItemEvaluating Experimental Design of ERT for Soil Moisture Monitoring in Contour Hedgerow Intercropping Systems(Hoboken, NJ : Wiley, 2012) Garré, S.; Günther, T.; Diels, J.; Vanderborght, J.Contour hedgerow intercropping systems have been proposed as an alternative to traditional agricultural practice with a single crop, as they are effective in reducing run-off and soil erosion. However, competition for water and nutrients between crops and associated hedgerows may reduce the overall performance of these systems. To get a more detailed understanding of the competition for water, spatially resolved monitoring of soil water contents in the soil-plant-atmosphere system is necessary. Electrical resistivity tomography (ERT) is potentially a valuable technique to monitor changes in soil moisture in space and time. In this study, the performance of different ERT electrode arrays to detect the soil moisture dynamics in a mono- and an intercropping system was tested. Their performance was analyzed based on a synthetic study using geophysical measures, such as data recovery and resolution, and using spatial statistics of retrieved water content, such as an adjusted coefficient of variation and semivariances. The synthetic ERT measurements detected differences between the cropping systems and retrieved spatial structure of the soil moisture distribution, but the variance and semivariance were underestimated. Sharp water content contrasts between horizons or in the neighborhood of a root water uptake bulb were smoothened. The addition of electrodes deeper in the soil improved the performance, but sometimes only marginally. ERT is therefore a valuable tool for soil moisture monitoring in the field under different cropping systems if an electrode array is used which can resolve the patterns expected to be present in the medium. The use of spatial statistics allowed to not only identify the overall model recovery, but also to quantify the recovery of spatial structures.
- ItemNoninvasive Estimation of Water Retention Parameters by Observing the Capillary Fringe with Magnetic Resonance Sounding(Hoboken, NJ : Wiley, 2014) Costabel, Stephan; Günther, ThomasThe magnetic resonance sounding (MRS) method is usually applied for delineation and characterization of aquifer system stratification. Its unique property, distinct from other hydrogeophysical methods, is the direct sensitivity to water content in the subsurface. The inversion of MRS data yields the subsurface water content distribution without need of a petrophysical model. Recent developments in instrumentation, i.e., decreased instrumental dead times and advanced noise cancellation strategies, enable the use of this method for investigating the vadose zone. A possible way to interpret MRS measurements with focus on water retention (WR) parameters is an inversion approach that directly provides WR parameters by modeling the capillary fringe (CF inversion). We have developed this kind of inversion further to account for different WR models and present a sensitivity study based on both synthetic and real field data. To assess the general applicability of the CF inversion, we analyzed the resolution properties for different measurement layouts and the parameter uncertainties for different realistic scenarios. Under moderate noise conditions and if the water table position is known, all WR parameters except the residual water content can be reliably estimated. The relative accuracy of the estimated pore distribution index estimation is better for larger CF. Small measurement loops of 5-m diameter achieve the best resolution for shallow investigation depths of <10 m.
- ItemInitiation and development of normal faults within the German alpine foreland basin: The inconspicuous role of basement structures(Hoboken, NJ : Wiley, 2016) Hartmann, Hartwig von; Tanner, David C.; Schumacher, SandraIn a large seismic cube within the German Alpine Molasse Basin, we recognize large normal faults with lateral alternating dips that displace the Molasse sediments. They are disconnected but strike parallel to fault lineaments of the underlying carbonate platform. This raises the question how such faults could independently develop. Structural analysis suggests that the faults grew both upward and downward from the middle of the Molasse package, i.e., they newly initiated within the Molasse sediments and were not caused by reactivation of the faults in the carbonate platform and/or crystalline basement. Numerical modeling of the basin proves that temporarily and spatially confined extensional stresses existed within the Molasse sediments but not in the carbonate platform and basement during lithospheric bending. The workflow shown here gives a new and as yet undocumented insight in the tectonic and structural processes within a foreland basin that was affected by buckling and bending in front of the orogen.
- ItemSoil hydraulic interpretation of nuclear magnetic resonance measurements based on circular and triangular capillary models(Hoboken, NJ : Wiley, 2021) Costabel, Stephan; Hiller, ThomasGeophysical nuclear magnetic resonance (NMR) applications are used to estimate pore size distributions (PSDs) of rocks and sediments. This is commonly realized by empirical calibration using information about the surface-to-volume ratio of the material. Recent research has developed joint inversion concepts for NMR relaxation data that provides the PSD with a minimum of information. The application requires the NMR signal of a sample at saturation and at least one at partial saturation and at known suction. The new inversion concept physically simulates the desaturation process as part of the forward operator. The cross-section of the model capillaries in the underlying bundle can be either circular or triangular. Our study investigates the performance of the NMR joint inversion to predict water retention function (WRF) and capillary-based hydraulic conductivity (Kcap) as functions of saturation for different sands. The angularity of the pores has no significant impact on the estimated WRF but affects the Kcap estimation significantly. Our study shows that the WRF is predicted reliably for sand samples under fast diffusion conditions. The Kcap estimations are also plausible but tend to systematic overestimation, for which we identified the tortuosity being the main reason. Because NMR relaxation data generally do not provide tortuosity information, a plausible tortuosity model remains an issue of classical calibration. Further development of the approach will thus consider tortuosity measurements (e.g., by electrical resistivity measurements and/or gradient NMR) and will consider the relaxation mechanisms outside fast diffusion conditions to enhance its applicability for coarse soils.
- ItemMagnetic suspension array technology: Controlled synthesis and screening in microfluidic networks(Hoboken, NJ : Wiley, 2016) Lin, Gungun; Karnaushenko, Dmitriy D.; Cañón Bermúdez, Gilbert Santiago; Schmidt, Oliver G.; Makarov, DenysInformation tagging and processing are vital in information‐intensive applications, e.g., telecommunication and high‐throughput drug screening. Magnetic suspension array technology may offer intrinsic advantages to screening applications by enabling high distinguishability, the ease of code generation, and the feasibility of fast code readout, though the practical applicability of magnetic suspension array technology remains hampered by the lack of quality administration of encoded microcarriers. Here, a logic‐controlled microfluidic system enabling controlled synthesis of magnetic suspension arrays in multiphase flow networks is realized. The smart and compact system offers a practical solution for the quality administration and screening of encoded magnetic microcarriers and addresses the universal need of process control for synthesis in microfluidic networks, i.e., on‐demand creation of droplet templates for high information capacity. The demonstration of magnetic suspension array technology enabled by magnetic in‐flow cytometry opens the avenue toward point‐of‐care multiplexed bead‐based assays, clinical diagnostics, and drug discovery.
- ItemFeasibility study on prepolarized surface nuclear magnetic resonance for soil moisture measurements(Hoboken, NJ : Wiley, 2021) Hiller, Thomas; Costabel, Stephan; Radić, Tino; Dlugosch, Raphael; Müller‐Petke, MikeIn the past few years, small-scale (2 m) prepolarized surface nuclear magnetic resonance (SNMR) has gained increasing interest in the research community. As recent studies demonstrated, the application of a strong prepolarization field enhances the SNMR signal of coils with a footprint <1 m2 up to a level that even enables investigations in urban areas. In particular, it is expected that this noninvasive method provides the soil moisture distribution in the upper 2 m of the subsurface in the near future. However, until now all field experiments have been carried out on water reservoirs only, in an approach to test and implement this rather new technique into the field of SNMR applications. We present the first prepolarized SNMR measurement on a real soil and demonstrate the general feasibility of this technique to qualitatively and quantitatively detect soil moisture in the upper first 0.5 m. Our soil moisture measurements are validated by independent time domain reflectometry data. To complement the field experiments with numerical simulations, we adapted the underlying SNMR spin dynamics simulations and account for prepolarization switch-off effects in the forward modeling of the SNMR excitation.
- ItemA novel universal algorithm for filament network tracing and cytoskeleton analysis(Hoboken, NJ : Wiley, 2021) Flormann, Daniel A.D.; Schu, Moritz; Terriac, Emmanuel; Thalla, Divyendu; Kainka, Lucina; Koch, Marcus; Gad, Annica K.B.; Lautenschläger, FranziskaThe rapid development of advanced microscopy techniques over recent decades has significantly increased the quality of imaging and our understanding of subcellular structures, such as the organization of the filaments of the cytoskeleton using fluorescence and electron microscopy. However, these recent improvements in imaging techniques have not been matched by similar development of techniques for computational analysis of the images of filament networks that can now be obtained. Hence, for a wide range of applications, reliable computational analysis of such two-dimensional methods remains challenging. Here, we present a new algorithm for tracing of filament networks. This software can extract many important parameters from grayscale images of filament networks, including the mesh hole size, and filament length and connectivity (also known as Coordination Number). In addition, the method allows sub-networks to be distinguished in two-dimensional images using intensity thresholding. We show that the algorithm can be used to analyze images of cytoskeleton networks obtained using different advanced microscopy methods. We have thus developed a new improved method for computational analysis of two-dimensional images of filamentous networks that has wide applications for existing imaging techniques. The algorithm is available as open-source software.
- ItemFreestanding MXene‐based macroforms for electrochemical energy storage applications(Hoboken, NJ : Wiley, 2023) Lu, Qiongqiong; Liu, Congcong; Zhao, Yirong; Pan, Wengao; Xie, Kun; Yue, Pengfei; Zhang, Guoshang; Omar, Ahmad; Liu, Lixiang; Yu, Minghao; Mikhailova, DariaFreestanding MXene-based macroforms have gained significant attention as versatile components in electrochemical energy storage applications owing to their interconnected conductive network, strong mechanical strength, and customizable surface chemistries derived from MXene nanosheets. This comprehensive review article encompasses key aspects related to the synthesis of MXene nanosheets, strategies for structure design and surface medication, surface modification, and the diverse fabrication methods employed to create freestanding MXene-based macroform architectures. The review also delves into the recent advancements in utilizing freestanding MXene macroforms for electrochemical energy storage applications, offering a detailed discussion on the significant progress achieved thus far. Notably, the correlation between the macroform's structural attributes and its performance characteristics is thoroughly explored, shedding light on the critical factors influencing efficiency and durability. Despite the remarkable development, the review also highlights the existing challenges and presents future perspectives for freestanding MXene-based macroforms in the realms of high-performance energy storage devices. By addressing these challenges and leveraging emerging opportunities, the potential of freestanding MXene-based macroforms can be harnessed to enable groundbreaking advancements in the field of energy storage.
- ItemAcid‐Base Interactions of Pyrazine, Ethyl Acetate, Di‐alcohols, and Lysine with the cyclic Alumosiloxane (Ph2SiO)8[Al(O)OH]4 in View of Mimicking Al2O3(H2O) Surface Reactions(Hoboken, NJ : Wiley, 2020) Veith, Michael; Kolano, David; Huch, VolkerThe etherate of (Ph2SiO)8[Al(O)OH]4 can be transformed into the pyrazine adduct (Ph2SiO)8[Al(O)OH]4·3N(C2H2)2N (1), the ethyl acetate adduct (Ph2SiO)8[Al(O)OH]4·3H3C‐C(O)OC2H5 (2), the 1,6‐hexane diol adduct (Ph2SiO)8[Al(O)OH]4·2HO–CH2(CH2)4CH2–OH (3) and the 1,4‐cyclohexane diol adduct (Ph2SiO)8[Al(O)OH]4·4HO–CH(CH2CH2)2CH–OH (4). In all compounds the OH groups of the starting material bind to the bases through O–H···N (1) or O–H···O hydrogen bonds (2, 3, 4) as found from single‐crystal X‐ray diffraction analyses. Whereas in 1 only three of the central OH groups bind to the pyrazines, in 2 two of them bind to the same carbonyl oxygen atom of the ethyl acetate resulting in an unprecedented O–H···O···H–O double hydrogen bridge. The hexane diol adduct 3 in the crystal forms a one‐dimensional coordination polymer with an intramolecularly to two OH groups grafted hexane diol loop, while the second hexane diol is connecting intermolecularly. In the cyclohexane diol adduct 4 all OH groups of the central Al4(OH)4 ring bind to different diols, leaving one alcohol group per diol uncoordinated. These “free” OH groups form an (O‐H···)4 assembly creating a three‐dimensional overall structure. When reacting with (Ph2SiO)8[Al(O)OH]4 lysine loses water, turns into the cyclic 3‐amino‐2‐azepanone, and transforms through chelation of one of the aluminum atoms the starting material into a new polycycle. The isolated compound has the composition (Ph2SiO)12[Al(O)OH]4[Al2O3]2·4 C6H12N2O·6(CH2)4O (5).