30 results
Search Results
Now showing 1 - 10 of 30
- ItemCatalytic Performance of Lanthanum Vanadate Catalysts in Ammoxidation of 2-Methylpyrazine(Basel : MDPI, 2016) Kalevaru, Venkata; Dhachapally, Naresh; Martin, AndreasThe influence of reaction conditions on the catalytic performance of lanthanum vanadate (La0.1V0.9Ox) catalyst in the ammoxidation of 2-methylpyrazine (MP) to 2-cyanopyarazine (CP) has been investigated. This novel catalytic material exhibited remarkably good performance with very high space-time-yields (STY) of CP. The reaction parameters such as the effect of temperature, gas hourly space velocity (GHSV) and all other reaction variables (e.g., NH3, air, and MP feed rates) on the catalytic performance were explored and optimized. For example, an increase in MP feed rate from 2 to >16 mmol/h led to decreased conversion of MP but increased the STY of CP significantly. Optimal performance was achieved when the reaction temperature was 420 °C and the molar ratio of 2-MP, ammonia, air, H2O and N2 in the feed gas was set to 1:7:26:13:22. Under these optimal reaction conditions, the catalyst showed a MP conversion of ~100%, CP selectivity of 86%, and STY of >500 gCP/(kgcat∙h). On the other hand, the formation of pyrazine (Py) as a by-product was found to be high when the NH3:MP ratio was lower at increased contact time. This suggests possible differences in the reaction mechanism pathways with respect to feed composition over La0.1V0.9Ox catalysts.
- ItemIncreasing the efficiency of optimized v-sba-15 catalysts in the selective oxidation of methane to formaldehyde by artificial neural network modelling(Basel : MDPI, 2020) Kunkel, Benny; Kabelitz, Anke; Buzanich, Ana Guilherme; Wohlrab, SebastianThe present study investigates the possibility of improving the selective oxidation of methane to formaldehyde over V-SBA-15 catalysts in two different ways. In a classical approach of catalyst optimization, the in situ synthesis of V-SBA-15 catalysts was optimized with regard to the applied pH value. Among the set of catalysts synthesized, a higher amount of incorporated vanadium, a higher content of polymeric VOx species as well as a less ordered structure of the support material were observed by increasing the pH values from 2.0 to 3.0. An optimum in performance during the selective oxidation of methane to formaldehyde with respect to activity and selectivity was found over V-SBA-15 prepared at a pH value of 2.5. With this knowledge, we have now evaluated the possibilities of reaction control using this catalyst. Specifically, artificial neural network modelling was applied after the collection of 232 training samples for obtaining insight into the influence of different reaction parameters (temperature; gas hourly space velocity (GHSV); and concentration of O2, N2 and H2O) onto methane conversion and selectivity towards formaldehyde. This optimization of reaction conditions resulted in an outstanding high space-time yield of 13.6 kgCH2O·kgcat·h−1. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemCpCo(III) Precatalysts for [2+2+2] Cycloadditions(Basel : MDPI, 2021) Fischer, Fabian; Eder, Michael; Hapke, MarkoCatalysts applied in cobalt-catalyzed cyclotrimerizations reactions in general rely on the use of Co(I) precatalysts or the in situ generation of Co(I) catalysts from Co(II) sources by reduction in the presence of steering ligands, often by addition of less noble metals. In this paper, we report the synthesis and properties of novel stable CpCo(III) complexes as precatalysts and their exemplary evaluation for application in catalytic [2+2+2] cycloadditions. The role of phosphite neutral ligands, as well as iodide and cyanide as anionic ligands, on the reactivity of the complexes was evaluated. A modified one-pot approach to the synthesis of Cp ring-functionalized Cp’Co(III) complexes was developed. The investigations demonstrated that CpCo(III) complexes can be directly applied as catalysts in catalytic cyclotrimerizations of triynes without reducing agents as additives. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemActivation, deactivation and reversibility phenomena in homogeneous catalysis : A showcase based on the chemistry of rhodium/phosphine catalysts(Basel : MDPI, 2019) Alberico, Elisabetta; Möller, Saskia; Horstmann, Moritz; Drexler, Hans-Joachim; Heller, DetlefIn the present work, the rich chemistry of rhodium/phosphine complexes, which are applied as homogeneous catalysts to promote a wide range of chemical transformations, has been used to showcase how the in situ generation of precatalysts, the conversion of precatalysts into the actually active species, as well as the reaction of the catalyst itself with other components in the reaction medium (substrates, solvents, additives) can lead to a number of deactivation phenomena and thus impact the efficiency of a catalytic process. Such phenomena may go unnoticed or may be overlooked, thus preventing the full understanding of the catalytic process which is a prerequisite for its optimization. Based on recent findings both from others and the authors’ laboratory concerning the chemistry of rhodium/diphosphine complexes, some guidelines are provided for the optimal generation of the catalytic active species from a suitable rhodium precursor and the diphosphine of interest; for the choice of the best solvent to prevent aggregation of coordinatively unsaturated metal fragments and sequestration of the active metal through too strong metal–solvent interactions; for preventing catalyst poisoning due to irreversible reaction with the product of the catalytic process or impurities present in the substrate. © 2019 by the authors.
- ItemRice husk derived porous silica as support for pd and CeO2 for low temperature catalytic methane combustion(Basel : MDPI, 2019) Liu, Dongjing; Seeburg, Dominik; Kreft, Stefanie; Bindig, René; Hartmann, Ingo; Schneider, Denise; Enke, Dirk; Wohlrab, SebastianThe separation of Pd and CeO2 on the inner surface of controlled porous glass (CPG, obtained from phase-separated borosilicate glass after extraction) yields long-term stable and highly active methane combustion catalysts. However, the limited availability of the CPG makes such catalysts highly expensive and limits their applicability. In this work, porous silica obtained from acid leached rice husks after calcination (RHS) was used as a sustainable, cheap and broadly available substitute for the above mentioned CPG. RHS-supported Pd-CeO2 with separated CeO2 clusters and Pd nanoparticles was fabricated via subsequent impregnation/calcination of molten cerium nitrate and different amounts of palladium nitrate solution. The Pd/CeO2/RHS catalysts were employed for the catalytic methane combustion in the temperature range of 150–500◦C under methane lean conditions (1000 ppm) in a simulated off-gas consisting of 9.0 vol% O2, and 5.5 vol% CO2 balanced with N2. Additionally, tests with 10.5 vol% H2O as co-feed were carried out. The results revealed that the RHS-supported catalysts reached the performance of the cost intensive benchmark catalyst based on CPG. The incorporation of Pd-CeO2 into RHS additionally improved water-resistance compared to solely Pd/CeO2 lowering the required temperature for methane combustion in presence of 10.5 vol% H2O to values significantly below 500◦C (T90 = 425◦C). © 2019 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemRelations between Structure, Activity and Stability in C3N4 Based Photocatalysts Used for Solar Hydrogen Production(Basel : MDPI, 2018-1-29) Sivasankaran, Ramesh P.; Rockstroh, Nils; Hollmann, Dirk; Kreyenschulte, Carsten R.; Agostini, Giovanni; Lund, Henrik; Acharjya, Amitava; Rabeah, Jabor; Bentrup, Ursula; Junge, Henrik; Thomas, Arne; Brückner, AngelikaSolar hydrogen production from water could be a sustainable and environmentally friendly alternative to fossil energy carriers, yet so far photocatalysts active and stable enough for large-scale applications are not available, calling for advanced research efforts. In this work, H2 evolution rates of up to 1968 and 5188 μmol h−1 g−1 were obtained from aqueous solutions of triethanolamine (TEOA) and oxalic acid (OA), respectively, by irradiating composites of AgIn5S8 (AIS), mesoporous C3N4 (CN, surface area >150 m2/g) and ≤2 wt.% in-situ photodeposited Pt nanoparticles (NPs) with UV-vis (≥300 nm) and pure visible light (≥420 nm). Structural properties and electron transport in these materials were analyzed by XRD, STEM-HAADF, XPS, UV-vis-DRS, ATR-IR, photoluminescence and in situ-EPR spectroscopy. Initial H2 formation rates were highest for Pt/CN, yet with TEOA this catalyst deactivated by inclusion of Pt NPs in the matrix of CN (most pronounced at λ ≥ 300 nm) while it remained active with OA, since in this case Pt NPs were enriched on the outermost surface of CN. In Pt/AIS-CN catalysts, Pt NPs were preferentially deposited on the surface of the AIS phase which prevents them from inclusion in the CN phase but reduces simultaneously the initial H2 evolution rate. This suggests that AIS hinders transport of separated electrons from the CN conduction band to Pt NPs but retains the latter accessible by protons to produce H2.
- ItemBimetallic Catalysts Containing Gold and Palladium for Environmentally Important Reactions(Basel : MDPI, 2016) Alshammari, Ahmad; Kalevaru, Venkata Narayana; Martin, AndreasSupported bimetallic nanoparticles (SBN) are extensively used as efficient redox catalysts. This kind of catalysis particularly using SBN has attracted immense research interest compared to their parent metals due to their unique physico-chemical properties. The primary objective of this contribution is to provide comprehensive overview about SBN and their application as promising catalysts. The present review contains four sections in total. Section 1 starts with a general introduction, recent progress, and brief summary of the application of SBN as promising catalysts for different applications. Section 2 reviews the preparation and characterization methods of SBN for a wide range of catalytic reactions. Section 3 concentrates on our own results related to the application of SBN in heterogeneous catalysis. In this section, the oxidation of cyclohexane to adipic acid (an eco-friendly and novel approach) will be discussed. In addition, the application of bimetallic Pd catalysts for vapor phase toluene acetoxylation in a fixed bed reactor will also be highlighted. Acetoxylation of toluene to benzyl acetate is another green route to synthesize benzyl acetate in one step. Finally, Section 4 describes the summary of the main points and also presents an outlook on the application of SBN as promising catalysts for the production of valuable products.
- ItemRole of SrCO3 on Photocatalytic Performance of SrTiO3-SrCO3 Composites(Basel : MDPI, 2022) Boga, Bíborka; Steinfeldt, Norbert; Moustakas, Nikolaos G.; Peppel, Tim; Lund, Henrik; Rabeah, Jabor; Pap, Zsolt; Cristea, Vasile-Mircea; Strunk, JenniferPerovskites such as SrTiO3 are interesting for photocatalytic applications due to their structure-related and electronic properties. These properties are influenced by the presence of SrCO3 which is often formed simultaneously during the hydrothermal synthesis of SrTiO3. In this study, SrTiO3-SrCO3 composites with different contents of SrCO3 (5–24 wt%) were synthesized. Their morphological, structural, and optical properties were investigated using complementary methods such as scanning electron microscopy (SEM), X-ray diffraction (XRD), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). Their photocatalytic activity was assessed during the degradation of diclofenac (DCFNa) in aqueous solution and CO2 photoreduction under Xe lamp irradiation. Improved photocatalytic efficiency in DCFNa degradation was observed for all the studied composites in comparison with SrTiO3, and the highest mineralization efficiency was obtained for the sample with 21 wt% SrCO3 content. The presence of SrCO3 led to an increased concentration of active species, such as •OH radicals. Otherwise, its presence inhibits CH4 and C2H6 production during CO2 photoreduction compared with pure SrTiO3.
- ItemReal Time Predictions of VGF-GaAs Growth Dynamics by LSTM Neural Networks(Basel : MDPI, 2021) Dropka, Natasha; Ecklebe, Stefan; Holena, MartinThe aim of this study was to assess the aptitude of the recurrent Long Short-Term Memory (LSTM) neural networks for fast and accurate predictions of process dynamics in vertical-gradient-freeze growth of gallium arsenide crystals (VGF-GaAs) using datasets generated by numerical transient simulations. Real time predictions of the temperatures and solid–liquid interface position in GaAs are crucial for control applications and for process visualization, i.e., for generation of digital twins. In the reported study, an LSTM network was trained on 1950 datasets with 2 external inputs and 6 outputs. Based on network performance criteria and training results, LSTMs showed the very accurate predictions of the VGF-GaAs growth process with median root-mean-square-error (RMSE) values of 2 × 10−3. This deep learning method achieved a superior predictive accuracy and timeliness compared with more traditional Nonlinear AutoRegressive eXogenous (NARX) recurrent networks.
- ItemApplication of Artificial Neural Networks in Crystal Growth of Electronic and Opto-Electronic Materials(Basel : MDPI, 2020) Dropka, Natasha; Holena, MartinIn this review, we summarize the results concerning the application of artificial neural networks (ANNs) in the crystal growth of electronic and opto-electronic materials. The main reason for using ANNs is to detect the patterns and relationships in non-linear static and dynamic data sets which are common in crystal growth processes, all in a real time. The fast forecasting is particularly important for the process control, since common numerical simulations are slow and in situ measurements of key process parameters are not feasible. This important machine learning approach thus makes it possible to determine optimized parameters for high-quality up-scaled crystals in real time. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- «
- 1 (current)
- 2
- 3
- »