Search Results
Crystal structure of diethyl (E)-2-[(benzofuran-2-yl)methylidene]succinate
2015, Schirmer, Marie-Luis, Spannenberg, Anke, Werner, Thomas
The title compound, C17H18O5, was synthesized by a base-free catalytic Wittig reaction. The molecule consists of a diethyl itaconate unit, which is connected via the C=C double bond to a benzofuran moiety. The benzofuran ring system (r.m.s. deviation = 0.007 Å) forms dihedral angles of 79.58 (4) and 12.12 (10)° with the mean planes through the cis and trans ethoxycarbonyl groups, respectively. An intramolecular C-H...O hydrogen bond involving the O atom of the benzofuran moiety is observed. In the crystal, molecules are linked into ribbons running parallel to the b axis by C-H...O hydrogen bonds.
Hydrolysis Stability of Bidentate Phosphites Utilized as Modifying Ligands in the Rh-Catalyzed n-Regioselective Hydroformylation of Olefins
2016, Zhang, Baoxin, Jiao, Haijun, Michalik, Dirk, Kloß, Svenja, Deter, Lisa Marie, Selent, Detlef, Spannenberg, Anke, Franke, Robert, Börner, Armin
The stability of ligands and catalysts is an almost neglected issue in homogeneous catalysis, but it is crucial for successful application of this methodology in technical scale. We have studied the effect of water on phosphites, which are the most applied cocatalysts in the n-regioselective homogeneous Rh-catalyzed hydroformylation of olefins. The stability of the bidentate nonsymmetrical diphosphite L1, as well as its two monophosphite constituents L2 and L3, toward hydrolysis was investigated by means of in situ NMR spectroscopy under similar conditions as applied in industry. Hydrolysis pathways, intermediates, and kinetics were clarified. DFT calculations were used to support the experimentally found data. The acylphosphite unit L2, which reacts with water in an unselective manner, was proven to be much less stable than the phenolphosphite L3. The stability of the bidentate ligand L1 can be therefore mainly attributed to its phenolphosphite moiety. With an excess of water, the hydrolysis of L1 and L2 as well as their Rh-complexes is first-order with respect to the phosphite. Surprisingly, coordination to Rh significantly stabilizes the monodentate ligand L2, while in strong contrast, the bidentate ligand L1 decomposes faster in the Rh complex. NMR spectroscopy provided evidence for the existence of species from decomposition of phosphites, which can likewise coordinate as ligands to the metal. Electron-withdrawing groups in the periphery of the acylphosphite moiety decrease the stability of L1, whereas 3,5-disubstituted salicylic acid derivatives with bulky groups showed superior stability. These modifications of L1 also give rise to different catalytic performances in the n-regioselective hydroformylation of n-octenes and 2-pentene, from which the 3,5-di-t-butyl-substituted ligand offered a higher n-regioselectivity accompanied by a lowering of the reaction rate in comparison to the parent ligand L1.
Crystal structure of (E)-dodec-2-enoic acid
2015, Sonneck, Marcel, Peppel, Tim, Spannenberg, Anke, Wohlrab, Sebastian
The crystal structure of (E)-dodec-2-enoic acid, C12H22O2, an [alpha],[beta]-unsaturated carboxylic acid with a melting point (295 K) near room temperature, is characterized by carboxylic acid inversion dimers linked by pairs of O-H...O hydrogen bonds. The carboxylic acid group and the following three carbon atoms of the chain of the (E)-dodec-2-enoic acid molecule lie almost in one plane (r.m.s. deviation for the four C atoms and two O atoms = 0.012 Å), whereas the remaining carbon atoms of the hydrocarbon chain adopt a nearly fully staggered conformation [moduli of torsion angles vary from 174.01 (13) to 179.97 (13)°].
Crystal structure of di-n-butylbis([eta]5-pentamethylcyclopentadienyl)hafnium(IV)
2015, Arndt, Perdita, Schubert,Kathleen, Burlakov, Vladimir V., Spannenberg, Anke, Rosenthal, Uwe
The crystal structure of the title compound, [Hf(C10H15)2(C4H9)2], reveals two independent molecules in the asymmetric unit. The diffraction experiment was performed with a racemically twinned crystal showing a 0.529 (5):0.471 (5) component ratio. Each HfIV atom is coordinated by two pentamethylcyclopentadienyl and two n-butyl ligands in a distorted tetrahedral geometry, with the cyclopentadienyl rings inclined to one another by 45.11 (15) and 45.37 (16)°. In contrast to the isostructural di(n-butyl)bis([eta]5-pentamethylcyclopentadienyl)zirconium(IV) complex with a noticeable difference in the Zr-butyl bonding, the Hf-Cbutyl bond lengths differ from each other by no more than 0.039 (3) Å.
Ni-In Synergy in CO2Hydrogenation to Methanol
2021, Zhu, Jiadong, Cannizzaro, Francesco, Liu, Liang, Zhang, Hao, Kosinov, Nikolay, Filot, Ivo A.W., Rabeah, Jabor, Brückner, Angelika, Hensen, Emiel J.M.
Indium oxide (In2O3) is a promising catalyst for selective CH3OH synthesis from CO2but displays insufficient activity at low reaction temperatures. By screening a range of promoters (Co, Ni, Cu, and Pd) in combination with In2O3using flame spray pyrolysis (FSP) synthesis, Ni is identified as the most suitable first-row transition-metal promoter with similar performance as Pd-In2O3. NiO-In2O3was optimized by varying the Ni/In ratio using FSP. The resulting catalysts including In2O3and NiO end members have similar high specific surface areas and morphology. The main products of CO2hydrogenation are CH3OH and CO with CH4being only observed at high NiO loading (≥75 wt %). The highest CH3OH rate (∼0.25 gMeOH/(gcath), 250 °C, and 30 bar) is obtained for a NiO loading of 6 wt %. Characterization of the as-prepared catalysts reveals a strong interaction between Ni cations and In2O3at low NiO loading (≤6 wt %). H2-TPR points to a higher surface density of oxygen vacancy (Ov) due to Ni substitution. X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, and electron paramagnetic resonance analysis of the used catalysts suggest that Ni cations can be reduced to Ni as single atoms and very small clusters during CO2hydrogenation. Supportive density functional theory calculations indicate that Ni promotion of CH3OH synthesis from CO2is mainly due to low-barrier H2dissociation on the reduced Ni surface species, facilitating hydrogenation of adsorbed CO2on Ov © 2021 The Authors. Published by American Chemical Society
Iron-Based Binary Catalytic System for the Valorization of CO2 into Biobased Cyclic Carbonates
2016, Büttner, Hendrik, Grimmer, Christoph, Steinbauer, Johannes, Werner, Thomas
The atom economic conversion of epoxidized vegetable oils and fatty acid derivatives with CO2 into cyclic carbonates permits the synthesis of novel oleo compounds from renewable resources as well as the valorization of CO2 as a C1-building block. Organic phosphorus salts proved to be selective catalysts for this reaction. In a widespread screening 11 inexpensive and nontoxic iron salts were evaluated as cocatalysts to enhance the reaction rate. In the presence of 0.25 mol % iron chloride the selectivity and conversion were significantly improved. The reaction parameters were optimized under solvent-free conditions, and the scope and limitation were evaluated for 9 epoxidized fatty acid esters and 4 epoxidized vegetable oils. The biobased carbonates were isolated in excellent yields up to 95% and can be considered to be based on 100% CO2 in respect to carbon. This binary catalyst system features high efficiency and plain simplicity while valorizing CO2 into cyclic carbonates based on renewable feedstocks.
Crystal structure of (E)-undec-2-enoic acid
2015, Sonneck, Marcel, Peppel, Tim, Spannenberg, Anke, Wohlrab, Sebastian
In the molecule of the title low-melting [alpha],[beta]-unsaturated carboxylic acid, C11H20O2, the least-squares mean line through the octyl chain forms an angle of 60.10 (13)° with the normal to plane of the acrylic acid fragment (r.m.s. deviation = 0.008 Å). In the crystal, centrosymmetrically related molecules are linked by pairs of O-H...O hydrogen bonds into dimers, forming layers parallel to the (041) plane.
Mechanistic Understanding of the Heterogeneous, Rhodium-Cyclic (Alkyl)(Amino)Carbene-Catalyzed (Fluoro-)Arene Hydrogenation
2020, Moock D., Wiesenfeldt M.P., Freitag M., Muratsugu S., Ikemoto S., Knitsch R., Schneidewind J., Baumann W., Schäfer A.H., Timmer A., Tada M., Hansen M.R., Glorius F.
Recently, chemoselective methods for the hydrogenation of fluorinated, silylated, and borylated arenes have been developed providing direct access to previously unattainable, valuable products. Herein, a comprehensive study on the employed rhodium-cyclic (alkyl)(amino)carbene (CAAC) catalyst precursor is disclosed. Mechanistic experiments, kinetic studies, and surface-spectroscopic methods revealed supported rhodium(0) nanoparticles (NP) as the active catalytic species. Further studies suggest that CAAC-derived modifiers play a key role in determining the chemoselectivity of the hydrogenation of fluorinated arenes, thus offering an avenue for further tuning of the catalytic properties. Copyright © 2020 American Chemical Society.
Crystal structure of bis{μ2-[(2-iminocyclopentylidene)methylidene]azanido-κ2 N:N'}bis[(η5-pentamethylcyclopentadienyl)zirconium(IV)] hexane monosolvate
2015, Becker, Lisanne, Spannenberg, Anke, Arndt, Perdita, Rosenthal, Uwe
The title compound, [Zr2(C10H15)4(C6H6N2)2]·C6H14, was obtained by the stoichiometric reaction of adiponitrile with [Zr(C10H15)2([eta]2-Me3SiC2SiMe3)]. Intramolecular nitrile-nitrile couplings and deprotonation of the substrate produced the (1-imino-2-enimino)cyclopentane ligand, which functions as a five-membered bridge between the two metal atoms. The ZrIV atom exhibits a distorted tetrahedral coordination sphere defined by two pentamethylcyclopentadienyl ligands, by the imino unit of one (1-imino-2-enimino)cyclopentane and by the enimino unit of the second (1-imino-2-enimino)cyclopentane. The cyclopentane ring of the ligand shows an envelope conformation. The asymmetric unit contains one half of the complex and one half of the hexane solvent molecule, both being completed by the application of inversion symmetry. One of the pentamethylcyclopentadienyl ligands is disordered over two sets of sites with a refined occupancy ratio of 0.8111 (3):0.189 (3). In the crystal, the complex molecules are packed into rods extending along [100], with the solvent molecules located in between. The rods are arranged in a distorted hexagonal packing.
Crystal structures of two ansa-titanocene tri-fluoro-methane-sulfonate complexes bearing the Me2Si(C5Me4)2 ligand
2016, Kessler, Monty, Godemann, Christian, Spannenberg, Anke, Beweries, Torsten
The crystal structures of two ansa-titanocene tri-fluoro-methane-sulfonate complexes bearing the Me2Si(C5Me4)2 ligand are reported, namely [di-methylbis-(η5-tetra-methyl-cyclo-penta-dien-yl)silane](tri-fluoro-methane-sulfonato-κ2O,O')titanium(III) toluene monosolvate, [Ti(CF3O3S)(C20H30Si)]·C7H8, 1, and chlorido-[di-methyl-bis-(η5-tetra-methyl-cyclo-penta-dien-yl)silane](tri-fluoro-methane-sulfonato-κO)titanium(IV), [Ti(CF3O3S)(C20H30Si)Cl], 2. Both complexes display a bent metallocene unit, the metal atom being coordinated in a distorted tetra-hedral geometry, with the tri-fluoro-methane-sulfonate anion acting as a bidentate or monodentate ligand in 1 and 2, respectively. In 1, weak π-π stacking inter-actions involving the toluene solvent mol-ecules [centroid-to-centroid distance = 3.9491 (11) Å] are observed.