Search Results
stress generation modulus as a counterpart of the stress relaxation modulus
1995, Brückner, Rolf, Hessenkemper, Heiko, Habeck, Andreas, Yue, Yuanzheng
In order to measure the time dependence of the stress relaxation modulus, E, a stress-strain deformation has to precede which induces a stress within the viscoelastic sample from which the sample relaxes. The generation of stress is characterized by a strain rate-dependent and relaxation rate-dependent portion which exhibits a maximum value, E_max, which is called "stress generation modulus". E_max was called the "maximum stress relaxation modulus" in earlier papers. Meanwhile, however, it turned out that a better verbal distinction should be made in future by the new term "stress generation modulus" because E_max is about one order of magnitude larger than E.
In-situ investigations of sintering and crystallization of lithium aluminosilicate glass-ceramics
1997, Zimemr, José, Raether, Friedrich, Müller, Gerd
The sintering and crystalhzation behaviour of a Li₂O-Al₂O₃-SiO₂ glass powder containing TiO₂ and ZrO₂ was investigated by the in-situ measuring methods of high-temperature dilatometry, high-temperature X-ray diffractometry and differential thermal analysis at heating rates between 0.5 a n d 20 K/min. By comparing the results of the different methods the shrinkage could be explained as an overlap of sintering and crystallization processes. When increasing the heating rate, the sintering and crystallization processes are separated mor e sharply, so that higher final densities of the sintered samples can be achieved.
Borosilicate glass matrix composites reinforced with short metal fibres
1994, Boccaccini, Aldo R., Ondracek, Gerhard, Syhre, Claudia
The reinforcement of a borosihcate glass with Hastelloy X short fibres is discussed. A fabrication process consisting of wet mixing of the glass powder and the metallic fibres and hot pressing of the mixtures was developed. Composites containing 15 vol.% fibres homogeneously distributed in a near fully dense glass matrix were obtained. Both Young's modulus and fracture strength increased with increasing volume fraction of fibres. The experimental values for the Young's modulus are in agreement with theoretical predictions. No fibre pull-out during fracture was detected and there is a good interfacial bond. By means of a rule-of-mixture calculation for the fracture energy, a five-fold increase in fracture toughness for composites containing 15 vol.% fibres can be predicted.
Thermal technologies to convert solid waste residuals into technical glass products
1996, Gutmann, Roland
Solid waste residuals f r o m waste incinerator flue gas cleaning Systems consist of various oxides, alkali halogenide salts, heavy metal Compounds and traces of organic pollutants. After the Separation of the volatile components from the oxides and the complete destruction of the organics by a thermal treatment at a temperature υ > 1200°C, the remaining oxides are obtained as a homogeneous black glass ready for the direct reuse as a filling or stabilizing material, the production of glass-ceramics by a further thermal processing and/or the use as a secondary raw material for the production of technical glass products, e.g. glass wool, glass fibre or foam glass. For the determination of the reuse potential of the vitrified wastes, basic material parameters have to be determined and compared with Standard glasses. Under this aspect the chemical resistance in acids, bases and water, the density, the hardness, the elasticity, shear and compression moduli, the Poisson's ratio, the bending strength, the dielectric permittivity a nd losses, the refractive index, the optical reflectivity and absorption behaviour, the thermal expansion coefficient, the thermal conductivity and heat capacity were determined for vitrified electrostatic precipitator ash from municipal solid waste incineration plants. The results of these studies, compared with those obtained for Duran, showed a low leachability in neutral and alkaline media a nd good electrical, mechanical and thermal properties. Tests to transform the as-received glasses into glass-ceramics were carried out. Preliminary recrystallization experiments led to dark brown to black-coloured, partially recrystallized glass samples.
Advanced oxygen burner for the glass industry
1997, Legiret, Thierry, Philippe, Louis, Tsiava, Remi, Marié, Bruno
[no abstract available]
Einsatz von Recyclingglas in der Hohlglasschmelze
1995, Beutinger, Markus
[no abstract available]
Nucleation at cordierite glass surfaces: Kinetic aspects
1996, Müller, Ralf, Reinsch, Stefan, Pannhorst, Wolfgang
The surface nucleation of high-quartz sohd Solution crystals at fractured surfaces of glasses of the stoichiometric cordierite composition (2MgO · 2AI₂O₃ · 5SiO₂) was studied by optical microscopy. Particular attention was focused on the nucleation kinetics. Α constant nucleation density, Ν ≈ 10⁻⁴ μm⁻², was found not to be significantly influenced by the time and the temperature of nucleation treatment. Even a very fast heating of samples employing heating rates u p to 1200 K/min does not lower Ν substantially. However, for small average crystal diameters ( < 2 0 μm) a distribution of crystal size in the same order of magnitude is detectable indicating a simultaneous appearance of b o t h measurable nucleation rates and growth velocities. It can be concluded that the surface nucleation of µ-cordierite occurs during the thermal treatment from a limited number of preferred nucleation sites; these sites are "used Up" rapidly enough to cause a strong Saturation effect of nucleation, but slow enough to cause a crystal size distribution at the same time. The surface nucleation rate, Is , was calculated from the observed distribution of crystal sizes. Is progressively increases with rising temperature similar to the crystal growth velocity indicating a broad temperature ränge of essential nucleation activity. The latter must be regarded as t he main obstacle to measure or to control surface nucleation density by means of two-step nucleation and growth treatments and must therefore be claimed to be mainly responsible for the observed constancy of N.
Konventionell beheizte Glasschmelzöfen für die Hohl- und Flachglasherstellung im deutschsprachigen Raum - Ergebnisse einer HVG-Umfrage - Teil 1. Beheizung, bauliche Merkmale, Schmelzleistung
1997, Fleischmann, Bernhard
[no abstract available]
Thermodynamic approach to viscosity in the glass transition
1994, Conradt, Reinhard
The glass transition is re-investigated by means of the formahsm of linear nonequilibrium thermodynamics. The process is treated for melts cooled down below their liquidus temperatures in terms of three events. These events are, in the order of decreasing temperature: by-passing of crystallization, freezing-in of stress relaxation, and freezing-in o f near-range structural relaxation. Conditions for the viscosity levels are derived at which each of these events is accomplished. The model is tested against data of five one-component, three simple binary and ternary, and three multicomponent systems. Within the scope of this test, it is confirmed that the model correctly describes the viscosity levels typical of the glass transition, as well as their dependence on the cooling rate. An explanation for the 10¹³dPa*s rule at Tg is included.
The mixed alkali effect revisited - A new look at an old problem
1994, Ingramm, Malcom D.
Progress is reported in resolving the long-standing problem of the mixed alkali effect. Previously theories have failed to encompass all aspects of this phenomenon which involves both a loosening up of glass structure and the reduction of ionic diffusivities. The recently proposed "dynamic structural model", however, reconciles the electrical and structural anomalies by recoupling ion hopping processes to localized site relaxations in glass. The appearance of a mismatch energy and site memory effects leads to successful prediction of the diffusivity "crossover". This could be the first step towards establishing a consensus on the mixed alkah effect which is reflected in several recent publications on this subject.