10 results
Search Results
Now showing 1 - 10 of 10
- ItemTransparent conductive oxides for coating applications(Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Quilitz, Mario; Oliveira, Peter W. de; Heusing, Sabine; Veith, MichaelTransparent, conductive oxides (TCOs) applied as coatings find multiple applications in various areas such as flat panel display setups, as electrodes in touch-screen panels, electrochromic devices, solar cells and in architectural applications for example as IR reflectors. The favored material in the class of TCOs is still ITO - Sn-doped In2O3 - due to its unique combination of high transparency and electrical conductivity. Though already very good, the potential of the ITO coatings with regard to their conductivity leaves some space for future improvements. Also ITO as a material has some serious drawbacks, such as limited availability and high costs. this work presents some stratgies to overcome these obstacles. One way to enhance the conductivities of alternative materials is to use carbon nanotubes as a dopant. This strategy was tested for ATO (Antimony-doped Tin Oxide), Titan dioxide and AZO (Aluminium-doped Zinc oxide). The results for these materials are presented. In coatings of ITO on glass or polymeric foils usually silica-based binders are used. They have the disadvantage to reduce the contact between the highly conducting grains and thus reduce overall conductivity in the composite. The matrix between the nanoparticles can be improved by several measures. Experiments with relevance in this direction are discussed. A third strategy aims at the reduction of costs in the process of ITO fabrication. Here one way to go is to use an electrochemical synthesis method. Results of the line of development are presented. Other strategies comprise the suitable processing of materials with a lower intrinsic conductivity or the search for materials with high intrinsic conductivity close to that of ITO. Exmples are presented and discussed.
- ItemLarge area production of optical coatings and devices by the sol-gel process(Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Oliveira, Peter; Quilitz, Mario; Heusing, Sabine; Lin, Hechun; Veith, Michael[no abstract available]
- ItemOne-dimensional oxide nanostructures: growth, applications and devices(Saarbrücke : Leibniz-Institut für Neue Materialien, 2008) Barth, Sven; Mathur, Sanjay; Hernandez-Ramireza, Francisco; Romano-Rodrigueza, AlbertOne dimensional (1D) inorganic materials are gaining high attention due to their structural stability and unique structural fatures. Among them, oxides are widely studied due to their well established application potential and mechanical as well as chemical stability. We have developed a generic approach for size-selective and site-specific growth of oxide nanowires by combination of a catalyst assisted growth mechanism and a molecular precursor approach, which is a viable alternative to other gas phase and solution procedures and produces well-defined (morphology and composition) materials.
- ItemResearch on the synthesis and applicability of surface modified nanoscaled metal oxide particles as curing catalyseres for UV-print-colours and lacquers(Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Becker-Willinger, Carsten; Schmitz-Stöwe, Sabine; Bentz, DirkIn the BMBF joint research project - NANOCURE - New Curing Methods for Print-Colours, Glues and Lacquers (prom. ref. : 13N9115) - a new class of nanoscaled photo initiators for radical polymerization processes in the printing industry is to be investigated. A possible mechanism for the reaction of TiO2 with acrylates, which is already described in literature is presented. Different methods of manufacturing TiO2 nanoparticles in the lower nanometric size range and their subsequent processing are described, the method is of special interest as it may lead to a possible integrated production process of UV-printing inks. The TEM analysis shows the homogeneous arrangement of TiO2 nanoparticles in an acrylic matrix, which is a necessary requirement for successful polymerization process. IR-spectroscopy is used to show the effect of TiO2-nanoparticles as UV photocatalytic polymerization initiators.
- ItemMechanisms of bonding effected by nanoparticles in zirconia coatings applied by spraying of suspensions(Saarbrücke : Leibniz-Institut für Neue Materialien, 2008) Adam, Jens; Aslan, Mesut; Drumm, Robert; Veith, MichaelZirconia coatings consisting of a mixture of coarse and fine grained zirconia powders prepared by spraying of suspensions and subsequent thermal treatment at limited temperatures (up to 500°C) are poor in adherence and in intrinsic mechanical strength. We have shown elsewhere that mechanical properties of these coatings can be improved clearly by adding a small amount of nanoscaled zirconia. Here, the structural and the chemical development of this coating material and of the nanoparticles is examined to gain information about the underlying bonding mechanisms. The applied temperature is relatively low in comparison to the usual onset temperature of accelerated sintering. Nevertheless, the results show that diffusion controlled material transport mechanisms play their role in bonding. The condensation of surface OH groups may participate in bonding, too. These first results confirm the potential of nanoparticles to act as inorganic binder. Additional research effort to clarify the underlying mechanisms in detail is of interest. For the practical side, it can be concluded that the resulting effect of mechanical consolidation of ceramic structures at relatively low temperatures enables new ceramic applications, for example a new type of ceramic coatings on metallic substrates.
- ItemWet chemical syntheses of Ag-nanoparticles(Saarbrücke : Leibniz-Institut für Neue Materialien, 2008) Moh, Karsten; Schumacher, Sarah[no abstract available]
- ItemTranslucent UV light absorbant coatings for wood(Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Ullrich, Alfred; Reinhard, Bernd; Wittmar, MatthiasEfficient protection of fast growing domestic woods against the effects of weathering and UV irradiation is of increased significance to obtain improved dimensional stability and durability comparable to tropical wood. To advance the properties of those woods, a combined treatment process was developed. First, samples of pine sapwood were impregnated by project partners in the University of Göttingen to improve the dimensional stability and to avoid fungal infection of the wood, then a coating containig zinc oxide nanoparticles was applied on the impregnated wood samples at INM. Due to the UV light absorption of zinc oxide nanoparticles, the coated wood substrates are distinguished by enhanced colour stability. Together with the impregnation the coating prevents wood from deterioration by UV-irradiation and changing climates while retaining optical appearance. The water-repellent properties of the coatings interfered with the impregnation and reduced the ingress of water. This resulted in a stabilising reduction of the swelling and shrinking and avoided the formation of cracks in both wood and coating. The improved characteristics were demonstrated by artificial weathering. A prototype of an impregnated and coated window has been manufactured and is currently exposed to outdoor weathering.
- ItemWork on non photocatalytically active titania particles(Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Müller, Thomas S.; Faller-Schneider, Christine; Moh, Karsten; Shanmugasundaram, Sakthivel; Oliveira, Peter W. de; Veith, MichaelTitanium dioxide has photocatalytic properties, i.e. under UV irradiation it develops an oxidative potential. In photocatalysis this is very desirable, but not when nano particulate titania is embedded into organic polymer matrices in order to increase the refractive index. UV irradiation would in this case destroy the material in the long run. For deactivation in general the titania is coated by e.g. silica or alumina which leads to other undesired effects like growth of the particle size and enhanced light scattering. The current work focuses on the application of techniques for doping during synthesis of crystallization of nano particulate TiO2. The photocatalysis activity was determined by degradation experiments of 4-chlorophenol using dip coated glass plates under artificial sunlight, where decreases of the photocatalytic effect of up to 90 % were found.
- ItemFunctional surfaces for controlled adhesion(Saarbrücke : Leibniz-Institut für Neue Materialien, 2009) Arzt, Eduard; Del Campo, AranzazuAdhesive joining with molecular (van der Waals) interactions without chemical glue is presently receiving much attention because of many potential applications. Research on how insects, spiders and geckos stick to surfaces has inspired a new paradigm: fibrillar surfaces with appropriate design can show much higher adhesion performance than flat surfaces. The insight gained in studying biological systems can be transferred to the development of optimized artificial attachment devices. By systematic variations of fiber diameter, aspect ratio and contact shape, we have produced, on a laboratory scale, artificial structures with adhesion strengths similar to the gecko. Further advances with switchable adhesion ("smart adhesives") have been demonstrated and may lead to interesting applications in medical products, sports equipment, construction materials and microfabrication.
- ItemPreparation of acoustic lenses by mechano-chemical synthesis and electrophoretic deposition of lead zirconium titanate (PZT) films(Saarbrücke : Leibniz-Institut für Neue Materialien, 2008) Bender, Michael; Drumm, Robert; Adam, Jens; Jakob, Annette; Lemor, Robert; Veith, MichaelPZT powders has been synthesized via reactive dry milling using PbZrO3 and PbTiO3 as starting materials. Stabel suspensions of the PZT particles in ethanol (d50(Vol) = 115 nm) were obtained by a chemomechanical dispersion step. Teh electrophoretic deposition has been optimized varying the cell voltage and the PZT solid content in the suspension. PZT films have been deposited on platinum coated saphire. After drying, the films are densely packed and free of cracks. By using lithium acetate and lead acetate as a sinter aid it was possible to reduce the sintering temperature to 1050°C. A good electrode has been sputtered onto the piezoelectric films which then have been poled by the corona method. The circular PZT dots (...) with a thickness of 1 µm show the expected oscillation resonance at about 2 GHz and can be used in acoustic lenses, for example in acoustic microscopes.