Search Results

Now showing 1 - 10 of 97
  • Item
    Femtosecond X-ray diffraction from nanolayered oxides
    (Amsterdam : Elsevier, 2010) Von Korff Schmising, C.; Harpoeth, A.; Zhavoronkov, N.; Woerner, M.; Elsaesser, T.; Bargheer, M.; Schmidbauer, M.; Vrejoiu, I.; Hesse, D.; Alexe, M.
    Femtosecond X-ray scattering offers the opportunity to investigate reversible lattice dynamics with unprecedented accuracy. We show in a prototype experiment how strain propagation modifies the functionality of a ferroelectric system on its intrinsic time scale.
  • Item
    Cohesive detachment of an elastic pillar from a dissimilar substrate
    (Amsterdam : Elsevier, 2017) Fleck, Norman A.; Khaderi, Syed Nizamuddin; McMeeking, Robert M.; Arzt, Eduard
    The adhesion of micron-scale surfaces due to intermolecular interactions is a subject of in- tense interest spanning electronics, biomechanics and the application of soft materials to engineering devices. The degree of adhesion is sensitive to the diameter of micro-pillars in addition to the degree of elastic mismatch between pillar and substrate. Adhesion- strength-controlled detachment of an elastic circular cylinder from a dissimilar substrate is predicted using a Dugdale-type of analysis, with a cohesive zone of uniform tensile strength emanating from the interface corner. Detachment initiates when the opening of the cohesive zone attains a critical value, giving way to crack formation. When the cohe- sive zone size at crack initiation is small compared to the pillar diameter, the initiation of detachment can be expressed in terms of a critical value H c of the corner stress inten- sity. The estimated pull-offforce is somewhat sensitive to the choice of stick/slip boundary condition used on the cohesive zone, especially when the substrate material is much stiffer than the pillar material. The analysis can be used to predict the sensitivity of detachment force to the size of pillar and to the degree of elastic mismatch between pillar and sub- strate.
  • Item
    Recovery and techno-functionality of flours and proteins from two edible insect species: Meal worm (Tenebrio molitor) and black soldier fly (Hermetia illucens) larvae
    (Amsterdam : Elsevier, 2016) Bußler, Sara; Rumpold, Birgit A.; Jander, Elisabeth; Rawel, Harshadrai M.; Schlüter, Oliver K.
    Depending on the species, edible insects are highly nutritious and thus represent a noteworthy alternative food and feed source. The current work investigates the protein extractability and techno-functionality of insect flour fractions recovered from Tenebrio molitor and Hermetia illucens. T. molitor and H. illucens flours contained about 20% crude fat and 60% and 36 % crude protein, respectively. Defatting reduced the crude fat content to 2.8% (T. molitor) and 8.8% (H. illucens) and increased the crude protein content to 68% and 47%, respectively. To isolate proteins from the flours, protein solubility was optimized by varying the pH, the ionic strength, and the extraction temperature of the solvent. All products and by-products accumulated in the protein production process were characterized by composition, selected techno-functional properties, protein solubility, composition and structure as well as their microbial load.
  • Item
    Significant increase of aerosol number concentrations in air masses crossing a densely trafficked sea area
    (Amsterdam : Elsevier, 2015) Kecorius, Simonas; Kivekäs, Niku; Kristensson, Adam; Tuch, Thomas; Covert, David S.; Birmili, Wolfram; Lihavainen, Heikki; Hyvärinen, Antti-Pekka; Martinsson, Johan; Sporre, Moa K.; Swietlicki, Erik; Wiedensohler, Alfred; Ulevicius, Vidmantas
    In this study, we evaluated 10 months data (September 2009 to June 2010) of atmospheric aerosol particle number size distribution at three atmospheric observation stations along the Baltic Sea coast: Vavihill (upwind, Sweden), Utö (upwind, Finland), and Preila (downwind, Lithuania). Differences in aerosol particle number size distributions between the upwind and downwind stations during situations of connected atmospheric flow, when the air passed each station, were used to assess the contribution of ship emissions to the aerosol number concentration (diameter interval 50–400 nm) in the Lithuanian background coastal environment. A clear increase in particle number concentration could be noticed, by a factor of 1.9 from Utö to Preila (the average total number concentration at Utö was 791 cm−3), and by a factor of 1.6 from Vavihill to Preila (the average total number concentration at Vavihill was 998 cm−3). The simultaneous measurements of absorption Ångström exponents close to unity at Preila supported our conclusion that ship emissions in the Baltic Sea contributed to the increase in particle number concentration at Preila.
  • Item
    Awassi sheep keeping in the Arabic steppe in relation to nitrous oxide emission from soil
    (Amsterdam : Elsevier, 2013) Hijazi, Omar; Berg, Werner; Moussa, Samouil; Ammon, Christian; von Bobrutzki, Kristina; Brunsch, Reiner
    Sheep husbandry is the main source of income for farmers in arid zones. Increasing sheep production on steppes may increase the greenhouse gas production. The objective of this study was to investigate the nitrous oxide (N2O) emissions from the steppes for Awassi sheep keeping and feed cropping in arid zones such as Syria. The methodology developed by the Intergovernmental Panel on Climate Change (IPCC) was used to estimate N2O emissions. A survey was conducted on 64 farms in Syria to gather data for analysis. Precipitation and crop yield data from 2001 to 2009 were also used for calculation and modelling. Sheep-keeping systems, precipitation, year and the region have significant effects on N2O emissions (p<0.05). Emissions of N2O from lands with extensive, semi-intensive and intensive systems were 0.30 ± 0.093, 0.598± 0.113 and 2.243± 0.187 kg sheep1year1, respectively. Crop production was higher in regions with high precipitation levels, which helped to reduce N2O emissions. Using more residuals of wheat, cotton and soya as feed for sheep in the keeping systems evaluated may decrease the overuse of steppe regions and N2O emissions. Nitrous oxide emissions of N2O from sheep-keeping areas can be reduced by changing sheep-keeping systems and increasing the crop production in arid zones through artificial irrigation.
  • Item
    Switchable double-sided micropatterned adhesives for selective fixation and detachment
    (Amsterdam : Elsevier, 2019) Tinnemann, V.; Arzt, E.; Hensel, R.
    Micropatterned dry adhesives are promising candidates for the development of innovative adhesive platforms. Their reversible adhesion to various materials and surfaces has been reported over more than a decade. Switching between a strong and a weak adhesive state can be introduced by elastic buckling instabilities of the microstructure. In this work, we report on novel adhesive pads that exhibit micropatterned pillars on both sides. In double-sided PDMS micropatterns, the dimensions of the pillar structures were tuned by modulating the critical force for buckling during compressive loading. In this way, selective detachment of glass substrates was induced from one side of the pad. Our results indicate a significant switching efficiency of up to 83% between the strong and weak adhesive state. The new structures have high potential for emerging applications where temporary, double-sided fixations in combination with a predetermined detachment location are required. © 2018
  • Item
    CW laser operation around 2-μm in (Tm,Yb):KLu(WO4) 2
    (Amsterdam : Elsevier, 2010) Segura, M.; Mateos, X.; Pujol, M.C.; Carvajal, J.J.; Petrov, V.; Aguiló, M.; Díaz, F.
    Laser generation in continuous wave (CW) regime at 1.94-μm from (Tm,Yb) codoped system has been investigated in two different hosts: KLu(WO 4)2 and KY(WO4)2. The high quality crystals were grown by the Top-Seeded Solution Growth Slow Cooling (TSSG-SC) method with doping levels of 2.5 at. %Tm and 5 at. %Yb. The active media were pumped with a diode laser at 980 nm. We demonstrated the superior performance of KLu(WO4)2 compared to that of KY(WO4) 2 and improved the results already obtained in the literature. The maximum laser output power reached was 157 mW for (Tm,Yb):KLu(WO 4)2 and 123 mW for (Tm,Yb):KY(WO4)2. © 2010 Published by Elsevier Ltd.
  • Item
    Medical ethics in the Anthropocene: how are €100 billion of German physicians' pension funds invested?
    (Amsterdam : Elsevier, 2019) Schulz, Christian M.; Ahrend, Klaus-Michael; Schneider, Gerhard; Hohendorf, Gerrit; Schellnhuber, Hans Joachim; Busse, Reinhard
    [No abstract available]
  • Item
    The Shared Socioeconomic Pathways and their energy, land use, and greenhouse gas emissions implications: An overview
    (Amsterdam : Elsevier, 2016) Riahi, Keywan; van Vuuren, Detlef P.; Kriegler, Elmar; Edmonds, Jae; O’Neill, Brian C.; Fujimori, Shinichiro; Bauer, Nico; Calvin, Katherine; Dellink, Rob; Fricko, Oliver; Lutz, Wolfgang; Popp, Alexander; Crespo Cuaresma, Jesus; KC, Samir; Leimbach, Marian; Jiang, Leiwen; Kram, Tom; Rao, Shilpa; Emmerling, Johannes; Ebi, Kristie; Hasegawa, Tomoko; Havlik, Petr; Humpenöder, Florian; Aleluia Da Silva, Lara; Smith, Steve; Stehfest, Elke; Bosetti, Valentina; Eom, Jiyong; Gernaat, David; Masui, Toshihiko; Rogelj, Joeri; Strefler, Jessica; Drouet, Laurent; Krey, Volker; Luderer, Gunnar; Harmsen, Mathijs; Takahashi, Kiyoshi; Baumstark, Lavinia; Doelman, Jonathan C.; Kainuma, Mikiko; Klimont, Zbigniew; Marangoni, Giacomo; Lotze-Campen, Hermann; Obersteiner, Michael; Tabeau, Andrzej; Tavoni, Massimo
    This paper presents the overview of the Shared Socioeconomic Pathways (SSPs) and their energy, land use, and emissions implications. The SSPs are part of a new scenario framework, established by the climate change research community in order to facilitate the integrated analysis of future climate impacts, vulnerabilities, adaptation, and mitigation. The pathways were developed over the last years as a joint community effort and describe plausible major global developments that together would lead in the future to different challenges for mitigation and adaptation to climate change. The SSPs are based on five narratives describing alternative socio-economic developments, including sustainable development, regional rivalry, inequality, fossil-fueled development, and middle-of-the-road development. The long-term demographic and economic projections of the SSPs depict a wide uncertainty range consistent with the scenario literature. A multi-model approach was used for the elaboration of the energy, land-use and the emissions trajectories of SSP-based scenarios. The baseline scenarios lead to global energy consumption of 400–1200 EJ in 2100, and feature vastly different land-use dynamics, ranging from a possible reduction in cropland area up to a massive expansion by more than 700 million hectares by 2100. The associated annual CO2 emissions of the baseline scenarios range from about 25 GtCO2 to more than 120 GtCO2 per year by 2100. With respect to mitigation, we find that associated costs strongly depend on three factors: (1) the policy assumptions, (2) the socio-economic narrative, and (3) the stringency of the target. The carbon price for reaching the target of 2.6 W/m2 that is consistent with a temperature change limit of 2 °C, differs in our analysis thus by about a factor of three across the SSP marker scenarios. Moreover, many models could not reach this target from the SSPs with high mitigation challenges. While the SSPs were designed to represent different mitigation and adaptation challenges, the resulting narratives and quantifications span a wide range of different futures broadly representative of the current literature. This allows their subsequent use and development in new assessments and research projects. Critical next steps for the community scenario process will, among others, involve regional and sectoral extensions, further elaboration of the adaptation and impacts dimension, as well as employing the SSP scenarios with the new generation of earth system models as part of the 6th climate model intercomparison project (CMIP6).
  • Item
    The quest for research information
    (Amsterdam : Elsevier, 2014) Blümel, Ina; Dietze, Stefan; Heller, Lambert; Jäschke, Robert; Mehlberg, Martin
    Research information, i.e., data about research projects, organisations, researchers or research outputs such as publications or patents, is spread across the web, usually residing in institutional and personal web pages or in semi-open databases and information systems. While there exists a wealth of unstructured information, structured data is limited and often exposed following proprietary or less-established schemas and interfaces. Therefore, a holistic and consistent view on research information across organisational and national boundaries is not feasible. On the other hand, web crawling and information extraction techniques have matured throughout the last decade, allowing for automated approaches of harvesting, extracting and consolidating research information into a more coherent knowledge graph. In this work, we give an overview of the current state of the art in research information sharing on the web and present initial ideas towards a more holistic approach for boot-strapping research information from available web sources.