Search Results
An Injectable Hybrid Hydrogel with Oriented Short Fibers Induces Unidirectional Growth of Functional Nerve Cells
To regenerate soft aligned tissues in living organisms, low invasive biomaterials are required to create 3D microenvironments with a structural complexity to mimic the tissue's native architecture. Here, a tunable injectable hydrogel is reported, which allows precise engineering of the construct's anisotropy in situ. This material is defined as an Anisogel, representing a new type of tissue regenerative therapy. The Anisogel comprises a soft hydrogel, surrounding magneto-responsive, cell adhesive, short fibers, which orient in situ in the direction of a low external magnetic field, before complete gelation of the matrix. The magnetic field can be removed after gelation of the biocompatible gel precursor, which fixes the aligned fibers and preserves the anisotropic structure of the Anisogel. Fibroblasts and nerve cells grow and extend unidirectionally within the Anisogels, in comparison to hydrogels without fibers or with randomly oriented fibers. The neurons inside the Anisogel show spontaneous electrical activity with calcium signals propagating along the anisotropy axis of the material. The reported system is simple and elegant and the short magneto-responsive fibers can be produced with an effective high-throughput method, ideal for a minimal invasive route for aligned tissue therapy.
A Light-Driven Microgel Rotor
The current understanding of motility through body shape deformation of micro-organisms and the knowledge of fluid flows at the microscale provides ample examples for mimicry and design of soft microrobots. In this work, a 2D spiral is presented that is capable of rotating by non-reciprocal curling deformations. The body of the microswimmer is a ribbon consisting of a thermoresponsive hydrogel bilayer with embedded plasmonic gold nanorods. Such a system allows fast local photothermal heating and nonreciprocal bending deformation of the hydrogel bilayer under nonequilibrium conditions. It is shown that the spiral acts as a spring capable of large deformations thanks to its low stiffness, which is tunable by the swelling degree of the hydrogel and the temperature. Tethering the ribbon to a freely rotating microsphere enables rotational motion of the spiral by stroboscopic irradiation. The efficiency of the rotor is estimated using resistive force theory for Stokes flow. This research demonstrates microscopic locomotion by the shape change of a spiral and may find applications in the field of microfluidics, or soft microrobotics.
Conjugated Polymer Nanoparticles toward In Vivo Theranostics – Focus on Targeting, Imaging, Therapy, and the Importance of Clearance
Conjugated polymer nanoparticles are highly fluorescent colloids with tunable emission colors ranging from the visible deep into the near infrared spectrum. Conjugated polymer nanoparticles are easy to prepare, tunable in their size, and virtually nonbleachable. Conjugated polymer particles can also be designed to give off heat upon irradiation. All these properties make conjugated polymer particles ideal materials for biomedical fluorescence and photoacoustic imaging as well as for theranostic applications. Here, different examples of surface functionalization to attach pathological homing devices, imaging modalities, as well as the emerging possibilities for therapeutic measures are discussed. Furthermore, clearance of the particles is considered, which is important to ultimately apply the materials for in vivo theranostics. Due to the conjugated backbone of the conjugated polymers, established degradation strategies, as known from hydrophilic nonconjugated polymer carriers, cannot be applied. Bioinspired strategies and potential pathways for degradation and clearance via structural changes upon triggers such as pH, oxidation, and temperature are also discussed in this progress report. © 2017 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Highly Conductive, Stretchable, and Cell-Adhesive Hydrogel by Nanoclay Doping
Electrically conductive materials that mimic physical and biological properties of tissues are urgently required for seamless brain-machine interfaces. Here, a multinetwork hydrogel combining electrical conductivity of 26 S m-1 , stretchability of 800%, and tissue-like elastic modulus of 15 kPa with mimicry of the extracellular matrix is reported. Engineering this unique set of properties is enabled by a novel in-scaffold polymerization approach. Colloidal hydrogels of the nanoclay Laponite are employed as supports for the assembly of secondary polymer networks. Laponite dramatically increases the conductivity of in-scaffold polymerized poly(ethylene-3,4-diethoxy thiophene) in the absence of other dopants, while preserving excellent stretchability. The scaffold is coated with a layer containing adhesive peptide and polysaccharide dextran sulfate supporting the attachment, proliferation, and neuronal differentiation of human induced pluripotent stem cells directly on the surface of conductive hydrogels. Due to its compatibility with simple extrusion printing, this material promises to enable tissue-mimetic neurostimulating electrodes.
Biadhesive Peptides for Assembling Stainless Steel and Compound Loaded Micro-Containers
Biadhesive peptides (peptesives) are an attractive tool for assembling two chemically different materials—for example, stainless steel and polycaprolactone (PCL). Stainless steel is used in medical stents and PCL is used as a biodegradable polymer for fabrication of tissue growth scaffolds and drug delivering micro-containers. Biadhesive peptides are composed of two domains (e.g., dermaseptin S1 and LCI) with different material-binding properties that are separated through a stiff peptide-spacer. The peptesive dermaseptin S1-domain Z-LCI immobilizes antibiotic-loaded PCL micro-containers on stainless steel surfaces. Immobilization is visualized by microscopy and field emission scanning electron microscopy analysis and released antibiotic from the micro-containers is confirmed through growth inhibition of Escherichia coli cells.
Precultures Grown under Fed-Batch Conditions Increase the Reliability and Reproducibility of High-Throughput Screening Results
One essential task in bioprocess development is strain selection. A common screening procedure consists of three steps: first, the picking of colonies; second, the execution of a batch preculture and main culture, e.g., in microtiter plates (MTPs); and third, the evaluation of product formation. Especially during the picking step, unintended variations occur due to undefined amounts and varying viability of transferred cells. The aim of this study is to demonstrate that the application of polymer-based controlled-release fed-batch MTPs during preculture eliminates these variations. The concept of equalizing growth through fed-batch conditions during preculture is theoretically discussed and then tested in a model system, namely, a cellulase-producing Escherichia coli clone bank containing 32 strains. Preculture is conducted once in the batch mode and once in the fed-batch mode. By applying the fed-batch mode, equalized growth is observed in the subsequent main culture. Furthermore, the standard deviation of cellulase activity is reduced compared to that observed in the conventional approach. Compared with the strains in the batch preculture process, the first-ranked strain in the fed-batch preculture process is the superior cellulase producer. These findings recommend the application of the fed-batch MTPs during preculture in high-throughput screening processes to achieve accurate and reliable results. © 2019 The Authors. Biotechnology Journal Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Magnetization Dynamics of an Individual Single-Crystalline Fe-Filled Carbon Nanotube
The magnetization dynamics of individual Fe-filled multiwall carbon-nanotubes (FeCNT), grown by chemical vapor deposition, are investigated by microresonator ferromagnetic resonance (FMR) and Brillouin light scattering (BLS) microscopy and corroborated by micromagnetic simulations. Currently, only static magnetometry measurements are available. They suggest that the FeCNTs consist of a single-crystalline Fe nanowire throughout the length. The number and structure of the FMR lines and the abrupt decay of the spin-wave transport seen in BLS indicate, however, that the Fe filling is not a single straight piece along the length. Therefore, a stepwise cutting procedure is applied in order to investigate the evolution of the ferromagnetic resonance lines as a function of the nanowire length. The results show that the FeCNT is indeed not homogeneous along the full length but is built from 300 to 400 nm long single-crystalline segments. These segments consist of magnetically high quality Fe nanowires with almost the bulk values of Fe and with a similar small damping in relation to thin films, promoting FeCNTs as appealing candidates for spin-wave transport in magnonic applications. © 2019 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
Rapid determination of lime requirement by mid-infrared spectroscopy: A promising approach for precision agriculture
Mid-infrared spectroscopy (MIRS) has proven to be a cost-effective, high throughput measurement technique for soil analysis. After multivariate calibration mid-infrared spectra can be used to predict various soil properties, some of which are related to lime requirement (LR). The objective of this study was to test the performance of MIRS for recommending variable rate liming on typical Central European soils in view of precision agriculture applications. In Germany, LR of arable topsoils is commonly derived from the parameters organic matter content (SOM), clay content, and soil pH (CaCl2) as recommended by the Association of German Agricultural Analytical and Research Institutes (VDLUFA). We analysed a total of 458 samples from six locations across Germany, which all revealed large within-field soil heterogeneity. Calcareous topsoils were observed at some positions of three locations (79 samples). To exclude such samples from LR determination, peak height at 2513 cm−1 of the MIR spectrum was used for identification. Spectra-based identification was accurate for carbonate contents > 0.5%. Subsequent LR derivation (LRSPP) from MIRS-PLSR predictions of SOM, clay, and pH (CaCl2) for non-calcareous soil samples using the VDLUFA look-up tables was successful for all locations (R2 = 0.54–0.82; RMSE = 857–1414 kg CaO ha−1). Alternatively, we tested direct LR prediction (LRDP) by MIRS-PLSR and also achieved satisfactory performance (R2 = 0.52–0.77; RMSE = 811–1420 kg CaO ha−1; RPD = 1.44–2.08). Further improvement was achieved by refining the VDLUFA tables towards a stepless algorithm. It can be concluded that MIRS provides a promising approach for precise LR estimation on heterogeneous arable fields. Large sample numbers can be processed with low effort which is an essential prerequisite for variable rate liming in precision agriculture. © 2019 The Authors. Journal of Plant Nutrition and Soil Science published by WILEY-VCH Verlag GmbH & Co. KGaA