Search Results
The effect of oxygen admixture on the properties of microwave generated plasma in Ar-O2: A modelling study
2021, Baeva, M, Stankov, M, Trautvetter, T, Methling, R, Hempel, F, Loffhagen, D, Foest, R
This work presents results of a self-consistent modelling analysis on microwave plasma generated in Ar-O2 mixtures at a frequency of 2.45 GHz at atmospheric pressure. The study focuses on how the plasma properties are influenced by the increase of the oxygen fraction in the gas mixture. The oxygen admixture is increased from 1% up to 95% in mass for values of the input microwave power of 1 and 1.5 kW. The results show that for a power of 1 kW and gradually increasing the oxygen admixture from 1% to 25% the electron density drops by a factor of more than four due to the energy lost by the electrons due to dissociation of oxygen molecules and the gas heating. An analysis of the number densities of species produced in the Ar-O2 plasma is presented. Oxygen admixtures of above 50% are considered along with an increase of the input microwave power in order to supply the discharge with electron number density values of the order of 1019 m-3. Gas temperatures above 3700 K are obtained in the plasma core along with a strong production of oxygen atoms with a number density of the order of 1023 m-3.
Dislocation and indium droplet related emission inhomogeneities in InGaN LEDs
2021, van Deurzen, Len, Gómez Ruiz, Mikel, Lee, Kevin, Turski, Henryk, Bharadwaj, Shyam, Page, Ryan, Protasenko, Vladimir, Xing, Huili (Grace), Lähnemann, Jonas, Jena, Debdeep
This report classifies emission inhomogeneities that manifest in InGaN quantum well blue light-emitting diodes grown by plasma-assisted molecular beam epitaxy on free-standing GaN substrates. By a combination of spatially resolved electroluminescence and cathodoluminescence measurements, atomic force microscopy, scanning electron microscopy and hot wet potassium hydroxide etching, the identified inhomogeneities are found to fall in four categories. Labeled here as type I through IV, they are distinguishable by their size, density, energy, intensity, radiative and electronic characteristics and chemical etch pits which correlates them with dislocations. Type I exhibits a blueshift of about 120 meV for the InGaN quantum well emission attributed to a perturbation of the active region, which is related to indium droplets that form on the surface in the metal-rich InGaN growth condition. Specifically, we attribute the blueshift to a decreased growth rate of and indium incorporation in the InGaN quantum wells underneath the droplet which is postulated to be the result of reduced incorporated N species due to increased N2 formation. The location of droplets are correlated with mixed type dislocations for type I defects. Types II through IV are due to screw dislocations, edge dislocations, and dislocation bunching, respectively, and form dark spots due to leakage current and nonradiative recombination.
Effective streamer discharge control by tailored nanosecond-pulsed high-voltage waveforms
2021, Huiskamp, T., Ton, C., Azizi, M., van Oorschot, J.J., Höft, H.
In this paper we present our solid-state nanosecond pulse source (the solid-state impedance-matched Marx generator) which can generate arbitrary waveforms and which can be used for pulsed discharge generation. The purpose of the development of such a generator is twofold: by being able to change the waveform at will, we aim to control the discharge generated by such pulses very precisely which can be very useful for plasma applications, but also for more fundamental studies. In the presented study, we applied the arbitrary-waveform pulse source for streamer discharge generation in a cylinder-wire-like arrangement and used the arbitrary-waveform capability to change the rise time (in our experiments we used 6.8-26.2 ns) of unipolar positive pulses with 6-10 kV amplitude and 80 ns duration. Additionally, we introduced variations of a step in the rising edge of the waveform. We performed measurements both in air and nitrogen to electrically characterize the discharge while analyzing the streamer propagation in the plasma reactor with intensified charge-coupled device imaging and measured ozone generation (in air). The results show that we can indeed control the propagation of the streamer discharge with the stepped waveform, but that the rise-time variation has little effect on the streamer propagation in our system. However, the streamer velocity and structure differs significantly comparing discharges in nitrogen and air for the same applied voltage waveform. Additionally, for some of the stepped waveforms we found a slight increase of the ozone yield for air at low overall energy densities.
Large-area van der Waals epitaxy and magnetic characterization of Fe3GeTe2 films on graphene
2021, Lopes, J. Marcelo J., Czubak, Dietmar, Zallo, Eugenio, Figueroa, Adriana I., Guillemard, Charles, Valvidares, Manuel, Rubio-Zuazo, Juan, López-Sanchéz, Jesús, Valenzuela, Sergio O., Hanke, Michael, Ramsteiner, Manfred
Scalable fabrication of magnetic 2D materials and heterostructures constitutes a crucial step for scaling down current spintronic devices and the development of novel spintronic applications. Here, we report on van der Waals (vdW) epitaxy of the layered magnetic metal Fe3GeTe2 (FGT) - a 2D crystal with highly tunable properties and a high prospect for room temperature ferromagnetism (FM) - directly on graphene by employing molecular beam epitaxy. Morphological and structural characterization confirmed the realization of large-area, continuous FGT/graphene heterostructure films with stable interfaces and good crystalline quality. Furthermore, magneto-transport and x-ray magnetic circular dichroism investigations confirmed a robust out-of-plane FM in the layers, comparable to state-of-the-art exfoliated flakes from bulk crystals. These results are highly relevant for further research on wafer-scale growth of vdW heterostructures combining FGT with other layered crystals such as transition metal dichalcogenides for the realization of multifunctional, atomically thin devices. © 2021 The Author(s).
Modelling of a miniature microwave driven nitrogen plasma jet and comparison to measurements
2021, Klute, Michael, Kemaneci, Efe, Porteanu, Horia-Eugen, Stefanović, Ilija, Heinrich, Wolfgang, Awakowicz, Peter, Brinkmann, Ralf Peter
The MMWICP (miniature microwave ICP) is a new plasma source using the induction principle. Recently Klute et al presented a mathematical model for the electromagnetic fields and power balance of the new device. In this work the electromagnetic model is coupled with a global chemistry model for nitrogen, based on the chemical reaction set of Thorsteinsson and Gudmundsson and customized for the geometry of the MMWICP. The combined model delivers a quantitative description for a non-thermal plasma at a pressure of p = 1000 Pa and a gas temperature of Tg = 650–1600 K. Comparison with published experimental data shows a good agreement for the volume averaged plasma parameters at high power, for the spatial distribution of the discharge and for the microwave measurements. Furthermore, the balance of capacitive and inductive coupling in the absorbed power is analyzed. This leads to the interpretation of the discharge regime at an electron density of ne ≈ 6.4 × 1018 m−3 as E/H-hybridmode with an capacitive and inductive component.
Roadmap on quantum nanotechnologies
2021, Laucht, Arne, Hohls, Frank, Ubbelohde, Niels, Fernando Gonzalez-Zalba, M., Reilly, David J., Stobbe, Søren, Schröder, Tim, Scarlino, Pasquale, Koski, Jonne V., Dzurak, Andrew, Yang, Chih-Hwan, Yoneda, Jun, Kuemmeth, Ferdinand, Bluhm, Hendrik, Pla, Jarryd, Hill, Charles, Salfi, Joe, Oiwa, Akira, Muhonen, Juha T., Verhagen, Ewold, LaHaye, M D, Kim, Hyun Ho, Tsen, Adam W, Culcer, Dimitrie, Geresdi, Attila, Mol, Jan A., Mohan, Varun, Jain, Prashant K., Baugh, Jonathan
Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing quantum mechanical effects in condensed matter. These quantum phenomena, in turn, have the potential to revolutionize the way we communicate, compute and probe the nanoscale world. Here, we review developments in key areas of quantum research in light of the nanotechnologies that enable them, with a view to what the future holds. Materials and devices with nanoscale features are used for quantum metrology and sensing, as building blocks for quantum computing, and as sources and detectors for quantum communication. They enable explorations of quantum behaviour and unconventional states in nano- and opto-mechanical systems, low-dimensional systems, molecular devices, nano-plasmonics, quantum electrodynamics, scanning tunnelling microscopy, and more. This rapidly expanding intersection of nanotechnology and quantum science/technology is mutually beneficial to both fields, laying claim to some of the most exciting scientific leaps of the last decade, with more on the horizon.
Shielding Effect on Flux Trapping in Pulsed-Field Magnetizing for Mg-B Bulk Magnet
2021, Oka, T., Yamanaka, K., Sudo, K., Dadiel, L., Ogawa, J., Yokoyama, K., Häßler, W., Noudem, J., Berger, K., Sakai, N., Miryala, M., Murakami, M.
MgB2 superconducting bulk materials are characterized as simple and uniform metallic compounds, and capable of trapping field of non-distorted conical shapes. Although pulsed-field magnetization technique (PFM) is expected to be a cheap and an easy way to activate them, the heat generation due to the magnetic flux motion causes serious degradation of captured fields. The authors precisely estimated the flux trapping property of the bulk samples, found that the flux-shielding effect closely attributed to the sample dimensions. The magnetic field capturing of Ti-5.0wt% sample reached the highest value of 0.76 T. The applied field which reached the centre of the sample surface shifted from 1.0 T to 1.2 T with increasing sample thickness from 3.67 mm to 5.80 mm. This means that the shielding effect was enhanced with increasing the sample thickness. Moreover, Ti-addition affected the frequency of flux jump happenings. The occurrence of flux jumps was suppressed in 5.0wt%Ti-added sample. This means that the heat capacity of the compounds was promoted by Ti addition.
Stripe-yzmagnetic order in the triangular-lattice antiferromagnet KCeS2
2021, Kulbakov, Anton A., Avdoshenko, Stanislav M., Puente-Orench, Inés, Deeb, Mahmoud, Doerr, Mathias, Schlender, Philipp, Doert, Thomas, Inosov, Dmytro S.
Yb- and Ce-based delafossites were recently identified as effective spin-1/2 antiferromagnets on the triangular lattice. Several Yb-based systems, such as NaYbO2, NaYbS2, and NaYbSe2, exhibit no long-range order down to the lowest measured temperatures and therefore serve as putative candidates for the realization of a quantum spin liquid. However, their isostructural Ce-based counterpart KCeS2 exhibits magnetic order below TN = 400 mK, which was so far identified only in thermodynamic measurements. Here we reveal the magnetic structure of this long-range ordered phase using magnetic neutron diffraction. We show that it represents the so-called 'stripe-yz' type of antiferromagnetic order with spins lying approximately in the triangular-lattice planes orthogonal to the nearest-neighbor Ce–Ce bonds. No structural lattice distortions are revealed below TN, indicating that the triangular lattice of Ce3+ ions remains geometrically perfect down to the lowest temperatures. We propose an effective Hamiltonian for KCeS2, based on a fit to the results of ab initio calculations, and demonstrate that its magnetic ground state matches the experimental spin structure.
Charge storage in metal-chalcogenide bilayer junctions
2021, Takagaki, Y.
We demonstrate that electrical charges are stored in the bilayer junctions of Al and Bi–Cu–S alloys. The junctions exhibit interfacial resistance switching, which is caused by a spontaneous production of high resistivity compounds at the interface and their electrochemical dissolution under a voltage bias. The charge storage results from the redox reactions that are responsible for the resistance switching. In contrast to conventional secondary batteries, the storing capability increases as the temperature is lowered from room temperature to 77 K, where the charges are released in a time scale nearly on the order of hours. The charging and discharging are thereby indicated not to rely on ionic transport. The battery effect is reversible in polarity. Storage characteristics are modified when Cu in the ternary alloy is replaced with Ag or Ni in a similar manner to the way the properties of the interfacial resistance switching are altered.
Complex systems approaches for Earth system data analysis
2021, Boers, Niklas, Kurths, Jürgen, Marwan, Norbert
Complex systems can, to a first approximation, be characterized by the fact that their dynamics emerging at the macroscopic level cannot be easily explained from the microscopic dynamics of the individual constituents of the system. This property of complex systems can be identified in virtually all natural systems surrounding us, but also in many social, economic, and technological systems. The defining characteristics of complex systems imply that their dynamics can often only be captured from the analysis of simulated or observed data. Here, we summarize recent advances in nonlinear data analysis of both simulated and real-world complex systems, with a focus on recurrence analysis for the investigation of individual or small sets of time series, and complex networks for the analysis of possibly very large, spatiotemporal datasets. We review and explain the recent success of these two key concepts of complexity science with an emphasis on applications for the analysis of geoscientific and in particular (palaeo-) climate data. In particular, we present several prominent examples where challenging problems in Earth system and climate science have been successfully addressed using recurrence analysis and complex networks. We outline several open questions for future lines of research in the direction of data-based complex system analysis, again with a focus on applications in the Earth sciences, and suggest possible combinations with suitable machine learning approaches. Beyond Earth system analysis, these methods have proven valuable also in many other scientific disciplines, such as neuroscience, physiology, epidemics, or engineering.