15 results
Search Results
Now showing 1 - 10 of 15
- ItemComprehensive characterization of osseous tissues from impedance measurements by effective medium approximation(New York, NY : American Inst. of Physics, 2021) Wei, Wenzuo; Shi, Fukun; Zhuang, Jie; Kolb, Juergen F.A unified mixing (UM) model was developed to derive microstructural information of trabecular bone, i.e., bone volume fraction (BV/TV), from electrical impedance spectroscopy. A distinct advantage of the UM-model over traditional methods, such as equivalent circuit models and multivariate analysis, is that the influence of both the environment (hydroxyapatite) and different inclusions (water, fat, and air) can be taken into account simultaneously. In addition, interactions between the different components such as interfacial polarization can be addressed by a dedicated fitting parameter v. Accordingly, values of BV/TV for different bone samples, e.g., including or not including water, were determined in the higher frequency range of 1-5 MHz. Results showed good agreement with experimental data obtained by micro-computer tomography. In particular, predictions for dielectric parameters that were derived for 3 and 4 MHz were found most promising for the assessment and distinction of osteopathic conditions and differences. This was shown by a clear differentiation of osseous tissues, e.g., the greater trochanter, femoral head, and femoral neck.
- ItemThe effect of oxygen admixture on the properties of microwave generated plasma in Ar-O2: A modelling study(Bristol : IOP Publ., 2021) Baeva, M; Stankov, M; Trautvetter, T; Methling, R; Hempel, F; Loffhagen, D; Foest, RThis work presents results of a self-consistent modelling analysis on microwave plasma generated in Ar-O2 mixtures at a frequency of 2.45 GHz at atmospheric pressure. The study focuses on how the plasma properties are influenced by the increase of the oxygen fraction in the gas mixture. The oxygen admixture is increased from 1% up to 95% in mass for values of the input microwave power of 1 and 1.5 kW. The results show that for a power of 1 kW and gradually increasing the oxygen admixture from 1% to 25% the electron density drops by a factor of more than four due to the energy lost by the electrons due to dissociation of oxygen molecules and the gas heating. An analysis of the number densities of species produced in the Ar-O2 plasma is presented. Oxygen admixtures of above 50% are considered along with an increase of the input microwave power in order to supply the discharge with electron number density values of the order of 1019 m-3. Gas temperatures above 3700 K are obtained in the plasma core along with a strong production of oxygen atoms with a number density of the order of 1023 m-3.
- ItemEfficiency of plasma-processed air for biological decontamination of crop seeds on the premise of unimpaired seed germination(Hoboken, NJ : Wiley Interscience, 2021) Wannicke, Nicola; Wagner, Robert; Stachowiak, Joerg; Nishime, Thalita M.C.; Ehlbeck, Joerg; Weltmann, Klaus‐Dieter; Brust, HenrikeIn this study, the antimicrobial effect of plasma-processed air (PPA) generated by a microwave-induced nonthermal plasma was investigated for preharvest utilization using three crop species: Barley, rape, and lupine. Bacillus atrophaeus spores were chosen as a model, inoculated onto seeds, and subsequently treated with PPA at two different flow rates, different filling regimes, and gas exposure times. PPA treatment was efficient in reducing viable spores of B. atrophaeus, reaching sporicidal effects in all species at certain parameter combinations. Maximum germination of seeds was strongly reduced in barley and rape seeds at some parameter combination, whereas it had a modest effect on lupine seeds. Seed hydrophilicity was not altered. Overall, PPA investigated in this study proved suitable for preharvest applications.
- ItemEffect of cold atmospheric pressure plasma treatment of eggshells on the total bacterial count inoculated Salmonella Enteritidis and selected quality parameters(Hoboken, NJ : Wiley Interscience, 2021) Moritz, Maike; Wiacek, Claudia; Weihe, Thomas; Ehlbeck, Jörg; Weltmann, Klaus‐Dieter; Braun, Peggy G.In the European Union, foodborne outbreaks caused by Salmonella Enteritidis, related to eggs and egg products, have even been reported in 2018. Atmospheric pressure plasma is becoming increasingly important as a decontamination method. A semidirect cold atmospheric pressure plasma, the flexible electrode plasma source, was developed for treating whole hen's eggs. An average reduction of 1.16 and 0.95 log colony-forming units (CFU)/egg was achieved for the total bacterial count of clean and dirty eggs, respectively. An inactivation of 4.1 log CFU/egg Salmonella Enteritidis was achieved with artificially inoculated eggshells. Selected quality parameters and sensory properties were analysed. Overall, the present study yielded promising results for a realistic implementation of an industrial prototype plasma source.
- ItemZebrafish larvae as a toxicity model in plasma medicine(Hoboken, NJ : Wiley Interscience, 2021) Gandhirajan, Rajesh K.; Endlich, Nicole; Bekeschus, SanderPlasma technology has emerged as a promising tool in medicine that, however, requires not only efficacy but also toxicological assessments. Traditional cell culture systems are fast and economical, but they lack in vivo relevance; however, rodent models are highly complex and necessitate extended facilities. Zebrafish larvae bridge this gap, and many larvae can be analyzed in well plates in a single run, giving results in 1–2 days. Using the kINPen, we found plasma exposure to reduce hedging rates and viability in a dose-dependent manner, accompanied with an increase in reactive oxygen species and a decrease of glutathione in plasma-treated fish. Modest growth alterations were also observed. Altogether, zebrafish larvae constitute a fast, reliable, and relevant model for testing the toxicity of plasma sources.
- ItemUnified modelling of TIG microarcs with evaporation from copper anode(Praha : Czech Technical University in Prague, Faculty of Electrical Engineering, Department of Physics, 2021) Baeva, Margarita; Methling, Ralf; Uhrlandt, DirkA previously developed unified model of a tungsten-inert gas (TIG) microarc has been extended to take into account the melting of the anode made of copper and the release of copper atoms due to its evaporation. The copper atoms enter the plasma to become excited and ionized. The presence of copper atoms and ions can strongly change the plasma parameters. The extended unified model further includes excited states of copper and collisional and radiative processes between them. Predictions of the parameters of the microarc plasma in the presence of copper species are presented and discussed.
- ItemReduce and refine: Plasma treated water vs conventional disinfectants for conveyor-belt cleaning in sustainable food-production lines(Melville, NY : American Inst. of Physics, 2021) Weihe, Thomas; Schnabel, Uta; Winter, Hauke; Möller, Timon; Stachowiak, Jörg; Neumann, Sabine; Schlüter, Oliver; Ehlbeck, JörgSustainable and microbiologically secure foodstuff production lines are of increasing scientific interest and are in the focus of recent research programs. Additionally, they are of great importance for the production industry due to the prevention of food-borne illnesses caused by pathogens such as Salmonella sp., Listeria monocytogenes, or Escherichia coli. These pathogens are responsible for production losses, loss of customer acceptance, and severe food-borne illnesses. A pathogenic threat is frequently combated with sanitizing steps of the production lines. For conveyor band cleaning, this study compares the cleaning abilities of nitric acid (HNO3) and plasma treated water (PTW), which have been sprayed via a commercially available nozzle on two different polymeric surfaces (polysiloxane and polyurethane). Additionally, the cleaning agents HNO3 and PTW have been characterized through their pH and their conductivity. These findings have been underpinned by experiments that focus on a possible influence of nozzle abrasion, such as brass and stainless-steel nanoparticles, on the antimicrobial potential of PTW and HNO3. Adversely acting effects like an enhanced abrasion of conveyer band materials due to PTW or HNO3 treatment have been checked by using light microscopic micrographs and topographic scans in high-resolution mode. Based on the presented results of the experiments, the suitability of an in-place sanitation step in foodstuff production lines has been demonstrated on a laboratory scale.
- ItemReactive species driven oxidative modifications of peptides—Tracing physical plasma liquid chemistry(Melville, NY : American Inst. of Physics, 2021) Wenske, Sebastian; Lackmann, Jan-Wilm; Busch, Larissa Milena; Bekeschus, Sander; von Woedtke, Thomas; Wende, KristianThe effluence of physical plasma consists of a significant share of reactive species, which may interact with biomolecules and yield chemical modifications comparable to those of physiological processes, e.g., post-translational protein modifications (oxPTMs). Consequentially, the aim of this work is to understand the role of physical plasma-derived reactive species in the introduction of oxPTM-like modifications in proteins. An artificial peptide library consisting of ten peptides was screened against the impact of two plasma sources, the argon-driven MHz-jet kINPen and the helium-driven RF-jet COST-Jet. Changes in the peptide molecular structure were analyzed by liquid chromatography–mass spectrometry. The amino acids cysteine, methionine, tyrosine, and tryptophan were identified as major targets. The introduction of one, two, or three oxygen atoms was the most common modification observed. Distinct modification patterns were observed for nitration (+N + 2O–H), which occurred in kINPen only (peroxynitrite), and chlorination (+Cl–H) that was exclusive for the COST-Jet in the presence of chloride ions (atomic oxygen/hypochlorite). Predominantly for the kINPen, singlet oxygen-related modifications, e.g., cleavage of tryptophan, were observed. Oxidation, carbonylation, and double oxidations were attributed to the impact of hydroxyl radicals and atomic oxygen. Leading to a significant change in the peptide side chain, most of these oxPTM-like modifications affect the secondary structure of amino acid chains, and amino acid polarity/functionality, ultimately modifying the performance and stability of cellular proteins.
- ItemEffects of Plasma-Chemical Composition on AISI 316L Surface Modification by Active Screen Nitrocarburizing Using Gaseous and Solid Carbon Precursors(Basel : MDPI, 2021) Jafarpour, Saeed M.; Pipa, Andrei V.; Puth, Alexander; Dalke, Anke; Röpcke, Jürgen; van Helden, Jean-Pierre H.; Biermann, HorstLow-temperature plasma nitrocarburizing treatments are applied to improve the surface properties of austenitic stainless steels by forming an expanded austenite layer without impairing the excellent corrosion resistance of the steel. Here, low-temperature active screen plasma nitrocarburizing (ASPNC) was investigated in an industrial-scale cold-wall reactor to compare the effects of two active screen materials: (i) a steel active screen with the addition of methane as a gaseous carbon-containing precursor and (ii) an active screen made of carbon-fibre-reinforced carbon (CFC) as a solid carbon precursor. By using both active screen materials, ASPNC treatments at variable plasma conditions were conducted using AISI 316L. Moreover, insight into the plasma-chemical composition of the H2-N2 plasma for both active screen materials was gained by laser absorption spectroscopy (LAS) combined with optical emission spectroscopy (OES). It was found that, in the case of a CFC active screen in a biased condition, the thickness of the nitrogen-expanded austenite layer increased, while the thickness of the carbon-expanded austenite layer decreased compared to the non-biased condition, in which the nitrogen- and carbon-expanded austenite layers had comparable thicknesses. Furthermore, the crucial role of biasing the workload to produce a thick and homogeneous expanded austenite layer by using a steel active screen was validated.
- ItemEffective streamer discharge control by tailored nanosecond-pulsed high-voltage waveforms(Bristol : IOP Publ., 2021) Huiskamp, T.; Ton, C.; Azizi, M.; van Oorschot, J.J.; Höft, H.In this paper we present our solid-state nanosecond pulse source (the solid-state impedance-matched Marx generator) which can generate arbitrary waveforms and which can be used for pulsed discharge generation. The purpose of the development of such a generator is twofold: by being able to change the waveform at will, we aim to control the discharge generated by such pulses very precisely which can be very useful for plasma applications, but also for more fundamental studies. In the presented study, we applied the arbitrary-waveform pulse source for streamer discharge generation in a cylinder-wire-like arrangement and used the arbitrary-waveform capability to change the rise time (in our experiments we used 6.8-26.2 ns) of unipolar positive pulses with 6-10 kV amplitude and 80 ns duration. Additionally, we introduced variations of a step in the rising edge of the waveform. We performed measurements both in air and nitrogen to electrically characterize the discharge while analyzing the streamer propagation in the plasma reactor with intensified charge-coupled device imaging and measured ozone generation (in air). The results show that we can indeed control the propagation of the streamer discharge with the stepped waveform, but that the rise-time variation has little effect on the streamer propagation in our system. However, the streamer velocity and structure differs significantly comparing discharges in nitrogen and air for the same applied voltage waveform. Additionally, for some of the stepped waveforms we found a slight increase of the ozone yield for air at low overall energy densities.