8 results
Search Results
Now showing 1 - 8 of 8
- ItemPeculiarities of electronic structure and composition in ultrasound milled silicon nanowires(Amsterdam [u.a.] : Elsevier, 2020) Parinova, E.V.; Pisliaruk, A.K.; Schleusener, A.; Koyuda, D.A.; Chumakov, R.G.; Lebedev, A.M.; Ovsyannikov, R.; Makarova, A.; Smirnov, D.; Sivakov, V.; Turishchev, S.Yu.The combined X-ray absorption and emission spectroscopy approach was applied for the detailed electronic structure and composition studies of silicon nanoparticles produced by the ultrasound milling of heavily and lowly doped Si nanowires formed by metal-assisted wet chemical etching. The ultrasoft X-ray emission spectroscopy and synchrotron based X-ray absorption near edges structure spectroscopy techniques were utilize to study the valence and conduction bands electronic structure together with developed surface phase composition qualitative analysis. Our achieved results based on the implemented surface sensitive techniques strongly suggest that nanoparticles under studies show a significant presence of the silicon suboxides depending on the pre-nature of initial Si wafers. The controlled variation of the Si nanoparticles surface composition and electronic structure, including band gap engineering, can open a new prospective for a wide range Si-based nanostructures application including the integration of such structures with organic or biological systems. © 2020
- ItemThe complexity of surface acoustic wave fields used for microfluidic applications(Amsterdam [u.a.] : Elsevier, 2020) Weser, R.; Winkler, A.; Weihnacht, M.; Menzel, S.; Schmidt, H.Using surface acoustic waves (SAW) for the agitation and manipulation of fluids and immersed particles or cells in lab-on-a-chip systems has been state of the art for several years. Basic tasks comprise fluid mixing, atomization of liquids as well as sorting and separation (or trapping) of particles and cells, e.g. in so-called acoustic tweezers. Even though the fundamental principles governing SAW excitation and propagation on anisotropic, piezoelectric substrates are well-investigated, the complexity of wave field effects including SAW diffraction, refraction and interference cannot be comprehensively simulated at this point of time with sufficient accuracy. However, the design of microfluidic actuators relies on a profound knowledge of SAW propagation, including superposition of multiple SAWs, to achieve the predestined functionality of the devices. Here, we present extensive experimental results of high-resolution analysis of the lateral distribution of the complex displacement amplitude, i.e. the wave field, alongside with the electrical S-parameters of the generating transducers. These measurements were carried out and are compared in setups utilizing travelling SAW (tSAW) excited by single interdigital transducer (IDT), standing SAW generated between two IDTs (1DsSAW, 1D acoustic tweezers) and between two pairs of IDTs (2DsSAW, 2D acoustic tweezers) with different angular alignment in respect to pure Rayleigh mode propagation directions and other practically relevant orientations. For these basic configurations, typically used to drive SAW-based microfluidics, the influence of common SAW phenomena including beam steering, coupling coefficient dispersion and diffraction on the resultant wave field is investigated. The results show how tailoring of the acoustic conditions, based on profound knowledge of the physical effects, can be achieved to finally realize a desired behavior of a SAW-based microacoustic-fluidic system. © 2020 Elsevier B.V.
- ItemOn the possibility of PhotoEmission Electron Microscopy for E. coli advanced studies(Amsterdam [u.a.] : Elsevier, 2020) Turishchev, S.Yu.; Marchenko, D.; Sivakov, V.; Belikov, E.A.; Chuvenkova, O.A.; Parinova, E.V.; Koyuda, D.A.; Chumakov, R.G.; Lebedev, A.M.; Kulikova, T.V.; Berezhnoy, A.A.; Valiakhmedova, I.V.; Praslova, N.V.; Preobrazhenskaya, E.V.; Antipov, S.S.The novel approach was proposed for detailed high-resolution studies of morphology and physico-chemical properties concomitantly at one measurement spot of E. coli bacterial cells culture immobilized onto silicon wafer surface in UHV conditions applying PhotoEmission Electron Microscopy under Hg lamp irradiation. For the E. coli characterization scanning electron microscopy (electron beam) and X-ray photoelectron spectroscopy (X-ray tube radiation) were applied prior to PhotoEmission Electron Microscopy measurements. In spite of irradiation doses collected for the cell arrays we were successful in detection of high-resolution images even of single E. coli bacterium by PhotoEmission Electron Microscopy technique followed by detailed high-resolution morphology studies by scanning electron microscopy. These results revealed widespread stability of the E. coli membranes shape after the significant number of applied characterization techniques. © 2019 The Authors
- ItemSize, concentration, and origin of human exhaled particles and their dependence on human factors with implications on infection transmission(Amsterdam [u.a.] : Elsevier, 2022) Bagheri, Gholamhossein; Schlenczek, Oliver; Turco, Laura; Thiede, Birte; Stieger, Katja; Kosub, Jana M.; Clauberg, Sigrid; Pöhlker, Mira L.; Pöhlker, Christopher; Moláček, Jan; Scheithauer, Simone; Bodenschatz, EberhardUnderstanding infection transmission between individuals, as well as evaluating the efficacy of protective measures, are key issues in pandemics driven by human respiratory particles. The key is a quantitative understanding of the size and concentration of particles exhaled and their variability across the size range for a representative population of all ages, genders, and different activities. Here we present data from 132 healthy volunteers aged 5 to 80 years, measured over the entire particle size range for each individual. Conventional particle spectrometry was combined with in-line holography under well-controlled conditions for common activities such as breathing, speaking, singing, and shouting. We find age to be the most important parameter for the concentration of small exhale particles <5 µm (PM5), which doubles over a 7-year period in adolescents and over a 30-year period in adults. Gender, body mass index, smoking or exercise habits have no discernible effect. We provide evidence that particles with a diameter of <5 µm originate from the lower respiratory tract, 5–15 µm from the larynx/pharynx, and >15 µm from the oral cavity. PM5 concentration can vary by one order of magnitude within a person, while inter-person variability can span two orders of magnitude, largely explained by difference in age. We found no discernible inter-person variability for particles larger than 5 µm. Our results show that cumulative volume of PM5 is 2–8 times higher in adults than in children. In contrast, number and volume concentration of larger particles, which are produced predominantly in the upper respiratory tract, is largely independent of age. Finally, we examined different types of airborne-transmissible respiratory diseases and provided insights into possible modes of infection transmission with and without several types/fits of face masks.
- ItemThermally induced evolution of the structure and optical properties of silicon nanowires(Amsterdam [u.a.] : Elsevier, 2020) Mussabek, Gauhar; Lysenko, Vladimir; Yermukhamed, Dana; Sivakov, Vladimir; Yu. Timoshenko, VictorIn the present paper, we report on the investigation of thermal annealing (TA) effect on structural and optical properties of crystalline silicon nanowires produced by metal-assisted chemical etching approach. In particular, the impact of TA on nanowire length, relative volume and size distribution of voids is described in terms of Lifshitz-Slyozov-Wagner theory considering the TA induced Oswald ripening in the SiNW arrays. It was also found that TA leads to a decrease of the SiNWs total reflection in the wide UV–VIS-IR spectral range. The reported effects can be used for tuning of crystalline SiNWs arrays in view of their further applications in photonics related fields. © 2020 The Authors
- ItemElectrically conductive and piezoresistive polymer nanocomposites using multiwalled carbon nanotubes in a flexible copolyester: Spectroscopic, morphological, mechanical and electrical properties(Amsterdam [u.a.] : Elsevier, 2022) Dhakal, Kedar Nath; Khanal, Santosh; Krause, Beate; Lach, Ralf; Grellmann, Wolfgang; Le, Hai Hong; Das, Amit; Wießner, Sven; Heinrich, Gert; Pionteck, Jürgen; Adhikari, RameshwarNanocomposites of multiwalled carbon nanotubes (MWCNTs) with poly(butylene adipate-co-terephthalate) (PBAT), a flexible aromatic–aliphatic copolyester, were prepared by melt mixing followed by compression moulding to investigate their spectroscopic, morphological, mechanical and electrical properties. A comparison of the Fourier transform infrared (FTIR) spectra of the neat polymer matrix and the composites showed no difference, implying a physical mixing of the matrix and the filler. A morphological investigation revealed the formation of a continuous and interconnected MWCNT network embedded in the polymer matrix with partial agglomeration. Increasing Martens hardness and indentation modulus and decreasing maximum indentation depth with increasing filler concentration demonstrated the reinforcement of the polymer by the MWCNTs. A volume resistivity of 4.6 × 105 Ω cm of the materials was achieved by the incorporation of only 1 wt.-% of the MWCNTs, which confirmed a quite low percolation threshold (below 1 wt.-%) of the nanocomposites. The electrical volume resistivity of the flexible nanocomposites was achieved up to 1.6 × 102 Ω cm, depending on the filler content. The elongation at the break of the nanocomposites at 374% and the maximum relative resistance changes (ΔR/R0) of 20 and 200 at 0.9 and 7.5% strains, respectively, were recorded in the nanocomposites (3 wt.-% MWCNTs) within the estimated volume resistivity range. A cyclic strain experiment shows the most stable and reproducible ΔR/R0 values in the 2%–5% strain range. The electrical conductivity and piezoresistivity of the investigated nanocomposites in correlation with the mechanical properties and observed morphology make them applicable for low-strain deformation-sensing.
- ItemThe effect of Ti or Zr additions on the microstructure and magnetic properties of MnAl-C alloys(Amsterdam [u.a.] : Elsevier, 2021) Feng, L.; Nielsch, K.; Woodcock, T.As-transformed and hot-deformed samples of MnAl-C alloys with Ti or Zr additions have been produced and characterized using magnetometry, X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Both Ti and Zr additions in MnAl-C alloys form carbide primary phases, TiC and ZrC, which consume the carbon meant to be dissolved in the metastable τ-phase to stabilize it against decomposition. With these two additions, the Curie temperature of τ-phase increases while its stability against decomposition decreases. After hot deformation, the MnAl-C alloys with Ti or Zr additions have lower polarisation and remanence due to the reduced stability of the τ-phase. Adding extra carbon along with Ti to a MnAl-C alloy in order to compensate for the C lost on formation of TiC restored the original stability of the τ-phase. After hot-deformation, this alloy exhibited a lower polarisation and remanence owing to the unexpected formation of the γ2-phase.
- ItemSecondary electron yield engineering of copper surfaces by 532 nm ultrashort laser pulses(Amsterdam [u.a.] : Elsevier, 2022) Lorenz, Pierre; Bez, Elena; Himmerlich, Marcel; Ehrhardt, Martin; Taborelli, Mauro; Zimmer, KlausNanostructured surfaces exhibit outstanding properties and enable manifold industrial applications. In this study the laser surface processing of polycrystalline, flat copper surfaces by 532 nm picosecond laser irradiation for secondary electron yield (SEY) reduction is reported. The laser beam was scanned in parallel lines across the sample surface in order to modify large surface areas. Morphology and SEY are characterized in dependence of the process parameters to derive correlations and mechanisms of the laser-based SEY engineering process. The nano- and microstructure morphology of the laser-modified surface was characterized by scanning electron microscopy and the secondary electron yield was measured. In general, an SEY reduction with increasing accumulated laser fluence was found. In particular, at low scanning speed (1 mm/s - 10 mm/s) and “high” laser power (~ 1 W) compact nanostructures with a very low SEY maximum of 0.7 are formed.