9 results
Search Results
Now showing 1 - 9 of 9
- ItemCombining Battery‐Type and Pseudocapacitive Charge Storage in Ag/Ti3C2Tx MXene Electrode for Capturing Chloride Ions with High Capacitance and Fast Ion Transport(Hoboken, NJ : Wiley, 2020) Liang, Mingxing; Wang, Lei; Presser, Volker; Dai, Xiaohu; Yu, Fei; Ma, JieThe recent advances in chloride‐ion capturing electrodes for capacitive deionization (CDI) are limited by the capacity, rate, and stability of desalination. This work introduces Ti3C2Tx/Ag synthesized via a facile oxidation‐reduction method and then uses it as an anode for chloride‐ion capture in CDI. Silver nanoparticles are formed successfully and uniformly distributed with the layered‐structure of Ti3C2Tx. All Ti3C2Tx/Ag samples are hydrophilic, which is beneficial for water desalination. Ti3C2Tx/Ag samples with a low charge transfer resistance exhibit both pseudocapacitive and battery behaviors. Herein, the Ti3C2Tx/Ag electrode with a reaction time of 3 h exhibits excellent desalination performance with a capacity of 135 mg Cl− g−1 at 20 mA g−1 in a 10 × 10−3 m NaCl solution. Furthermore, low energy consumption of 0.42 kWh kg−1 Cl− and a desalination rate of 1.5 mg Cl− g−1 min−1 at 50 mA g−1 is achieved. The Ti3C2Tx/Ag system exhibits fast rate capability, high desalination capacity, low energy consumption, and excellent cyclability, which can be ascribed to the synergistic effect between the battery and pseudocapacitive behaviors of the Ti3C2Tx/Ag hybrid material. This work provides fundamental insight into the coupling of battery and pseudocapacitive behaviors during Cl− capture for electrochemical desalination.
- ItemSelective Out‐of‐Plane Optical Coupling between Vertical and Planar Microrings in a 3D Configuration(Hoboken, NJ : Wiley, 2020) Valligatla, Sreeramulu; Wang, Jiawei; Madani, Abbas; Naz, Ehsan Saei Ghareh; Hao, Qi; Saggau, Christian Niclaas; Yin, Yin; Ma, Libo; Schmidt, Oliver G.3D photonic integrated circuits are expected to play a key role in future optoelectronics with efficient signal transfer between photonic layers. Here, the optical coupling of tubular microcavities, supporting resonances in a vertical plane, with planar microrings, accommodating in‐plane resonances, is explored. In such a 3D coupled composite system with largely mismatched cavity sizes, periodic mode splitting and resonant mode shifts are observed due to mode‐selective interactions. The axial direction of the microtube cavity provides additional design freedom for selective mode coupling, which is achieved by carefully adjusting the axial displacement between the microtube and the microring. The spectral anticrossing behavior is caused by strong coupling in this composite optical system and is excellently reproduced by numerical modeling. Interfacing tubular microcavities with planar microrings is a promising approach toward interlayer light transfer with added optical functionality in 3D photonic systems.
- ItemContact Aging Enhances Adhesion of Micropatterned Silicone Adhesives to Glass Substrates(Hoboken, NJ : Wiley, 2020) Thiemecke, Jonathan; Hensel, RenéThe transfer of biological concepts into synthetic micropatterned adhesives has recently enabled a new generation of switchable, reversible handling devices. Over the last two decades, many design principles have been explored that helped to understand the underlying mechanics and to optimize such adhesives for certain applications. An aspect that has been overlooked so far is the influence of longer hold times on the adhesive contacts. Exemplarily, the pull‐off stress and work of separation of a micropatterned adhesive specimen are enhanced by factors 3 and 6, respectively, after 1000 min in contact with a glass substrate. In addition to such global measures, the increase of adhesion of all individual micropillars is analyzed. It is found that contact aging varied across the microarray, as it drastically depends on local conditions. Despite great differences on the micropillar scale, the adhesion of entire specimens increased with very similar power laws, as this is determined by the mean contact ageing of the individual structures. Overall, contact aging must be critically evaluated before using micropatterned adhesives, especially for long‐term fixations and material combinations that are chemically attractive to each other.
- ItemVoltage‐Controlled Deblocking of Magnetization Reversal in Thin Films by Tunable Domain Wall Interactions and Pinning Sites(Hoboken, NJ : Wiley, 2020) Zehner, Jonas; Soldatov, Ivan; Schneider, Sebastian; Heller, René; Khojasteh, Nasrin B.; Schiemenez, Sandra; Fähler, Sebastian; Nielsch, Kornelius; Schäfer, Rudolf; Leistner, KarinHigh energy efficiency of magnetic devices is crucial for applications such as data storage, computation, and actuation. Redox‐based (magneto‐ionic) voltage control of magnetism is a promising room‐temperature pathway to improve energy efficiency. However, for ferromagnetic metals, the magneto‐ionic effects studied so far require ultrathin films with tunable perpendicular magnetic anisotropy or nanoporous structures for appreciable effects. This paper reports a fully reversible, low voltage‐induced collapse of coercivity and remanence by redox reactions in iron oxide/iron films with uniaxial in‐plane anisotropy. In the initial iron oxide/iron films, Néel wall interactions stabilize a blocked state with high coercivity. During the voltage‐triggered reduction of the iron oxide layer, in situ Kerr microscopy reveals inverse changes of coercivity and anisotropy, and a coarsening of the magnetic microstructure. These results confirm a magneto‐ionic deblocking mechanism, which relies on changes of the Néel wall interactions, and of the microstructural domain‐wall‐pinning sites. With this approach, voltage‐controlled 180° magnetization switching with high energy‐efficiency is achieved. It opens up possibilities for developing magnetic devices programmable by ultralow power and for the reversible tuning of defect‐controlled materials in general.
- ItemHybrid Anodes of Lithium Titanium Oxide and Carbon Onions for Lithium‐Ion and Sodium‐Ion Energy Storage(Hoboken, NJ : Wiley, 2020) Shim, Hwirim; Arnold, Stefanie; Budak, Öznil; Ulbricht, Maike; Srimuk, Pattarachai; Presser, VolkerThis study demonstrates the hybridization of Li4Ti5O12 (LTO) with different types of carbon onions synthesized from nanodiamonds. The carbon onions mixed with a Li4Ti5Ox precursor for sol–gel synthesis. These hybrid materials are tested as anodes for both lithium‐ion battery (LIB) and sodium‐ion battery (SIB). Electrochemical characterization for LIB application is carried out using 1 m LiPF6 in a 1:1 (by volume) ethylene carbonate and dimethyl carbonate as the electrolyte. For lithium‐ion intercalation, LTO hybridized with carbon onions from the inert‐gas route achieves an excellent electrochemical performance of 188 mAh g−1 at 10 mA g−1, which maintains 100 mAh g−1 at 1 A g−1 and has a cycling stability of 96% of initial capacity after 400 cycles, thereby outperforming both neat LTO and LTO with onions obtained via vacuum treatment. The performance of the best‐performing hybrid material (LTO with carbon onions from argon annealing) in an SIB is tested, using 1 m NaClO4 in ethylene/dimethyl/fluoroethylene carbonate (19:19:2 by mass) as the electrolyte. A maximum capacity of 102 mAh g−1 for the SIB system is obtained, with a capacity retention of 96% after 500 cycles.
- ItemEmerging Roles of 1D Vertical Nanostructures in Orchestrating Immune Cell Functions(Hoboken, NJ : Wiley, 2020) Chen, Yaping; Wang, Ji; Li, Xiangling; Hu, Ning; Voelcker, Nicolas H.; Xie, Xi; Elnathan, RoeyEngineered nano–bio cellular interfaces driven by 1D vertical nanostructures (1D‐VNS) are set to prompt radical progress in modulating cellular processes at the nanoscale. Here, tuneable cell–VNS interfacial interactions are probed and assessed, highlighting the use of 1D‐VNS in immunomodulation, and intracellular delivery into immune cells—both crucial in fundamental and translational biomedical research. With programmable topography and adaptable surface functionalization, 1D‐VNS provide unique biophysical and biochemical cues to orchestrate innate and adaptive immunity, both ex vivo and in vivo. The intimate nanoscale cell–VNS interface leads to membrane penetration and cellular deformation, facilitating efficient intracellular delivery of diverse bioactive cargoes into hard‐to‐transfect immune cells. The unsettled interfacial mechanisms reported to be involved in VNS‐mediated intracellular delivery are discussed. By identifying up‐to‐date progress and fundamental challenges of current 1D‐VNS technology in immune‐cell manipulation, it is hoped that this report gives timely insights for further advances in developing 1D‐VNS as a safe, universal, and highly scalable platform for cell engineering and enrichment in advanced cancer immunotherapy such as chimeric antigen receptor‐T therapy.
- ItemFreestanding MXene‐based macroforms for electrochemical energy storage applications(Hoboken, NJ : Wiley, 2023) Lu, Qiongqiong; Liu, Congcong; Zhao, Yirong; Pan, Wengao; Xie, Kun; Yue, Pengfei; Zhang, Guoshang; Omar, Ahmad; Liu, Lixiang; Yu, Minghao; Mikhailova, DariaFreestanding MXene-based macroforms have gained significant attention as versatile components in electrochemical energy storage applications owing to their interconnected conductive network, strong mechanical strength, and customizable surface chemistries derived from MXene nanosheets. This comprehensive review article encompasses key aspects related to the synthesis of MXene nanosheets, strategies for structure design and surface medication, surface modification, and the diverse fabrication methods employed to create freestanding MXene-based macroform architectures. The review also delves into the recent advancements in utilizing freestanding MXene macroforms for electrochemical energy storage applications, offering a detailed discussion on the significant progress achieved thus far. Notably, the correlation between the macroform's structural attributes and its performance characteristics is thoroughly explored, shedding light on the critical factors influencing efficiency and durability. Despite the remarkable development, the review also highlights the existing challenges and presents future perspectives for freestanding MXene-based macroforms in the realms of high-performance energy storage devices. By addressing these challenges and leveraging emerging opportunities, the potential of freestanding MXene-based macroforms can be harnessed to enable groundbreaking advancements in the field of energy storage.
- ItemDetermination of the Azimuthal Extent of Coherent E‐Region Scatter Using the ICEBEAR Linear Receiver Array(Hoboken, NJ : Wiley, 2021) Huyghebaert, Devin; McWilliams, Kathryn; Hussey, Glenn; Galeschuk, Draven; Chau, Jorge L.; Vierinen, JuhaThe Ionospheric Continuous-wave E-region Bistatic Experimental Auroral Radar (ICEBEAR) is a VHF coherent scatter radar that operates with a field-of-view centered on 58°N, 106°W and measures characteristics of ionospheric E-region plasma density irregularities. The initial operations of ICEBEAR utilized a wavelength-spaced linear receiving array to determine the angle of arrival of the ionospheric scatter at the receiver site. Initially only the shortest baselines were used to determine the angle of arrival of the scatter. This publication uses this linear antenna array configuration and expands on the initial angle of arrival determination by including all the cross-spectra available from the antenna array to determine both the azimuthal angle of arrival and the azimuthal extent of the incoming ionospheric scatter. This is accomplished by fitting Gaussian distributions to the complex coherence of the signal between different antennas and deriving the azimuthal angle and extent based on the best fit. Fourteen hours of data during an active ionospheric period (March 10, 2018, 0–14 UT) were analyzed to investigate the Gaussian fitting procedure and determine its feasibility for implementation with ICEBEAR. A comparison between mapped scatter, both neglecting azimuthal extent and including azimuthal extent is presented. It demonstrates that the azimuthal extent of the ionospheric E-region scatter is very important for accurately portraying and analyzing the ICEBEAR measurements.
- ItemVirtual Testing of Geometrically Imperfect Additively Manufactured Lattice Structures(Hoboken, NJ : Wiley, 2021) Gebhardt, Ulrike; Kästner, Markus; Hufenbach, Julia Kristin; Kühn, Uta; Berner, Matthias; Holtzhausen, StefanAdditively manufactured lattice structures increase the lightweight potential of components for technical applications. When modelling the mechanical behaviour of those lattice structures, imperfections within the structures need to be considered. In this contribution we investigate the effect of process induced pores of varying size and location inside the lattice structure during pressure tests using a 2D minimal model in two configurations. It shows that the location of pores with respect to the configuration of the model has a strong influence on whether the imperfection decreases the mechanical performance.