16 results
Search Results
Now showing 1 - 10 of 16
- ItemManaging power demand from air conditioning benefits solar pv in India scenarios for 2040(Basel : MDPI, 2020) Ershad, Ahmad Murtaza; Pietzcker, Robert; Ueckerdt, Falko; Luderer, GunnarAn Indian electricity system with very high shares of solar photovoltaics seems to be a plausible future given the ever-falling solar photovoltaic (PV) costs, recent Indian auction prices, and governmental support schemes. However, the variability of solar PV electricity, i.e., the seasonal, daily, and other weather-induced variations, could create an economic barrier. In this paper, we analyzed a strategy to overcome this barrier with demand-side management (DSM) by lending flexibility to the rapidly increasing electricity demand for air conditioning through either precooling or chilled water storage. With an open-source power sector model, we estimated the endogenous investments into and the hourly dispatching of these demand-side options for a broad range of potential PV shares in the Indian power system in 2040. We found that both options reduce the challenges of variability by shifting electricity demand from the evening peak to midday, thereby reducing the temporal mismatch of demand and solar PV supply profiles. This increases the economic value of solar PV, especially at shares above 40%, the level at which the economic value roughly doubles through demand flexibility. Consequently, DSM increases the competitive and cost-optimal solar PV generation share from 33-45% (without DSM) to ∼45-60% (with DSM). These insights are transferable to most countries with high solar irradiation in warm climate zones, which amounts to a major share of future electricity demand. This suggests that technologies, which give flexibility to air conditioning demand, can be an important contribution toward enabling a solar-centered global electricity supply. © 2020 by the authors.
- ItemFuture changes in consumption: The income effect on greenhouse gas emissions(Amsterdam [u.a.] : Elsevier Science, 2021) Bjelle, Eivind Lekve; Wiebe, Kirsten S.; Többen, Johannes; Tisserant, Alexandre; Ivanova, Diana; Vita, Gibran; Wood, RichardThe scale and patterns of household consumption are important determinants of environmental impacts. Whilst affluence has been shown to have a strong correlation with environmental impact, they do not necessarily grow at the same rate. Given the apparent contradiction between the sustainable development goals of economic growth and environmental protection, it is important to understand the effect of rising affluence and concurrent changing consumption patterns on future environmental impacts. Here we develop an econometric demand model based on the data available from a global multiregional input-output dataset. We model future household consumption following scenarios of population and GDP growth for 49 individual regions. The greenhouse gas (GHG) emissions resulting from the future household demand is then explored both with and without consideration of the change in expenditure over time on different consumption categories. Compared to a baseline scenario where final demand grows in line with the 2011 average consumption pattern up until 2030, we find that changing consumer preferences with increasing affluence has a small negative effect on global cumulative GHG emissions. The differences are more profound on both a regional and a product level. For the demand model scenario, we find the largest decrease in GHG emissions for the BRICS and other developing countries, while emissions in North America and the EU remain unchanged. Decreased spending and resulting emissions on food are cancelled out by increased spending and emissions on transportation. Despite relatively small global differences between the scenarios, the regional and sectoral wedges indicate that there is a large untapped potential in environmental policies and lifestyle changes that can complement the technological transition towards a low-emitting society.
- ItemMeasuring and monitoring urban impacts on climate change from space(Basel : MDPI, 2020) Milesi, Cristina; Churkina, GalinaAs urban areas continue to expand and play a critical role as both contributors to climate change and hotspots of vulnerability to its effects, cities have become battlegrounds for climate change adaptation and mitigation. Large amounts of earth observations from space have been collected over the last five decades and while most of the measurements have not been designed specifically for monitoring urban areas, an increasing number of these observations is being used for understanding the growth rates of cities and their environmental impacts. Here we reviewed the existing tools available from satellite remote sensing to study urban contribution to climate change, which could be used for monitoring the progress of climate change mitigation strategies at the city level. We described earth observations that are suitable for measuring and monitoring urban population, extent, and structure; urban emissions of greenhouse gases and other air pollutants; urban energy consumption; and extent, intensity, and effects on surrounding regions, including nearby water bodies, of urban heat islands. We compared the observations available and obtainable from space with the measurements desirable for monitoring. Despite considerable progress in monitoring urban extent, structure, heat island intensity, and air pollution from space, many limitations and uncertainties still need to be resolved. We emphasize that some important variables, such as population density and urban energy consumption, cannot be suitably measured from space with available observations.
- ItemAnalysing Interlinked Frequency Dynamics of the Urban Acoustic Environment(Basel : MDPI AG, 2022) Haselhoff, Timo; Braun, Tobias; Hornberg, Jonas; Lawrence, Bryce T.; Ahmed, Salman; Gruehn, Dietwald; Moebus, SusanneAs sustainable metropolitan regions require more densely built-up areas, a comprehensive understanding of the urban acoustic environment (AE) is needed. However, comprehensive datasets of the urban AE and well-established research methods for the AE are scarce. Datasets of audio recordings tend to be large and require a lot of storage space as well as computationally expensive analyses. Thus, knowledge about the long-term urban AE is limited. In recent years, however, these limitations have been steadily overcome, allowing a more comprehensive analysis of the urban AE. In this respect, the objective of this work is to contribute to a better understanding of the time-frequency domain of the urban AE, analysing automatic audio recordings from nine urban settings over ten months. We compute median power spectra as well as normalised spectrograms for all settings. Additionally, we demonstrate the use of frequency correlation matrices (FCMs) as a novel approach to access large audio datasets. Our results show site-dependent patterns in frequency dynamics. Normalised spectrograms reveal that frequency bins with low power hold relevant information and that the AE changes considerably over a year. We demonstrate that this information can be captured by using FCMs, which also unravel communities of interlinked frequency dynamics for all settings.
- ItemTightening EU ETS targets in line with the European Green Deal: Impacts on the decarbonization of the EU power sector(Amsterdam : Elsevier Science, 2021) Pietzcker, Robert C.; Osorio, Sebastian; Rodrigues, RenatoThe EU Green Deal calls for climate neutrality by 2050 and emission reductions of 50–55% in 2030 in comparison to 1990. Achieving these reductions requires a substantial tightening of the regulations of the EU emissions trading system (EU ETS). This paper explores how the power sector would have to change in reaction to a tighter EU ETS target, and analyses the technological and economic implications. To cover the major ETS sectors, we combine a detailed power sector model with a marginal-abatement cost curve representation of industry emission abatement. We find that tightening the target would speed up the transformation by 3–17 years for different parts of the electricity system, with renewables contributing 74% of the electricity in 2030, EU-wide coal use almost completely phased-out by 2030 instead of 2045, and zero electricity generation emissions reached by 2040. Carbon prices within the EU ETS would more than triple to 129€/tCO2 in 2030, reducing cumulated power sector emissions from 2017 to 2057 by 54% compared to a scenario with the current target. This transformation would come at limited costs: total discounted power system costs would only increase by 5%. We test our findings against a number of sensitivities: an increased electricity demand, which might arise from sector coupling, increases deployment of wind and solar and prolongs gas usage. Not allowing transmission expansion beyond 2020 levels shifts investments from wind to PV, hydrogen and batteries, and increases total system costs by 3%. Finally, the unavailability of fossil carbon capture and storage (CCS) or further nuclear investments does not impact results. Unavailability of bioenergy-based CCS (BECCS) has a visible impact (18% increase) on cumulated power sector emissions, thus shifting more of the mitigation burden to the industry sector, but does not increase electricity prices or total system costs (<1% increase). © 2021 The Authors
- ItemCorrelated power time series of individual wind turbines: A data driven model approach(Woodbury, NY : American Inst. of Physics, 2020) Braun, Tobias; Waechter, Matthias; Peinke, Joachim; Guhr, ThomasWind farms can be regarded as complex systems that are, on the one hand, coupled to the nonlinear, stochastic characteristics of weather and, on the other hand, strongly influenced by supervisory control mechanisms. One crucial problem in this context today is the predictability of wind energy as an intermittent renewable resource with additional non-stationary nature. In this context, we analyze the power time series measured in an offshore wind farm for a total period of one year with a time resolution of 10 min. Applying detrended fluctuation analysis, we characterize the autocorrelation of power time series and find a Hurst exponent in the persistent regime with crossover behavior. To enrich the modeling perspective of complex large wind energy systems, we develop a stochastic reduced-form model of power time series. The observed transitions between two dominating power generation phases are reflected by a bistable deterministic component, while correlated stochastic fluctuations account for the identified persistence. The model succeeds to qualitatively reproduce several empirical characteristics such as the autocorrelation function and the bimodal probability density function. © 2020 Author(s).
- ItemBalancing Health, Economy and Climate Risk in a Multi-Crisis(Basel : MDPI, 2021) Nathwani, Jatin; Lind, Niels; Renn, Ortwin; Schellnhuber, Hans JoachimIn the presence of a global pandemic (COVID-19), the relentless pressure on global decision-makers is to ensure a balancing of health (reduce mortality impacts), economic goals (income for livelihood sustenance), and environmental sustainability (stabilize GHG emissions long term). The global energy supply system is a dominant contributor to the GHG burden and deeply embedded in the economy with its current share of 85%, use of fossil fuels has remained unchanged over 3 decades. A unique approach is presented to harmonizing the goals of human safety, economic development, and climate risk, respectively, through an operational tool that provides clear guidance to decision-makers in support of policy interventions for decarbonization. Improving climate change performance as an integral part of meeting human development goals allows the achievement of a country’s environmental, social, and economic well-being to be tracked and monitored. A primary contribution of this paper is to allow a transparent accounting of national performance highlighting the goals of enhancing human safety in concert with mitigation of climate risks. A measure of a country’s overall performance, combined as the Development and Climate Change Performance Index (DCI), is derived from two standardized indexes, the development index H and the Climate Change Performance Index CCPI. Data are analyzed for 55 countries comprising 65 percent of the world’s population. Through active management and monitoring, the proposed DCI can illustrate national performance to highlight a country’s current standing, rates of improvement over time, and a historical profile of progress of nations by bringing climate risk mitigation and economic well-being into better alignment.
- ItemSpatially explicit analysis identifies significant potential for bioenergy with carbon capture and storage in China([London] : Nature Publishing Group UK, 2021) Xing, Xiaofan; Wang, Rong; Bauer, Nico; Ciais, Philippe; Cao, Junji; Chen, Jianmin; Tang, Xu; Wang, Lin; Yang, Xin; Boucher, Olivier; Goll, Daniel; Peñuelas, Josep; Janssens, Ivan A.; Balkanski, Yves; Clark, James; Ma, Jianmin; Pan, Bo; Zhang, Shicheng; Ye, Xingnan; Wang, Yutao; Li, Qing; Luo, Gang; Shen, Guofeng; Li, Wei; Yang, Yechen; Xu, SiqingAs China ramped-up coal power capacities rapidly while CO2 emissions need to decline, these capacities would turn into stranded assets. To deal with this risk, a promising option is to retrofit these capacities to co-fire with biomass and eventually upgrade to CCS operation (BECCS), but the feasibility is debated with respect to negative impacts on broader sustainability issues. Here we present a data-rich spatially explicit approach to estimate the marginal cost curve for decarbonizing the power sector in China with BECCS. We identify a potential of 222 GW of power capacities in 2836 counties generated by co-firing 0.9 Gt of biomass from the same county, with half being agricultural residues. Our spatially explicit method helps to reduce uncertainty in the economic costs and emissions of BECCS, identify the best opportunities for bioenergy and show the limitations by logistical challenges to achieve carbon neutrality in the power sector with large-scale BECCS in China.
- ItemRemote Sensing Based Yield Estimation of Rice (Oryza Sativa L.) Using Gradient Boosted Regression in India(Basel : MDPI, 2021) Arumugam, Ponraj; Chemura, Abel; Schauberger, Bernhard; Gornott, ChristophAccurate and spatially explicit yield information is required to ensure farmers’ income and food security at local and national levels. Current approaches based on crop cutting experiments are expensive and usually too late for timely income stabilization measures like crop insurances. We, therefore, utilized a Gradient Boosted Regression (GBR), a machine learning technique, to estimate rice yields at ~500 m spatial resolution for rice-producing areas in India with potential application for near real-time estimates. We used resampled intermediate resolution (~5 km) images of the Moderate Resolution Imaging Spectroradiometer (MODIS) Leaf Area Index (LAI) and observed yields at the district level in India for calibrating GBR models. These GBRs were then used to downscale district yields to 500 m resolution. Downscaled yields were re-aggregated for validation against out-of-sample district yields not used for model training and an additional independent data set of block-level (below district-level) yields. Our downscaled and re-aggregated yields agree well with reported district-level observations from 2003 to 2015 (r = 0.85 & MAE = 0.15 t/ha). The model performance improved further when estimating separate models for different rice cropping densities (up to r = 0.93). An additional out-of-sample validation for the years 2016 and 2017, proved successful with r = 0.84 and r = 0.77, respectively. Simulated yield accuracy was higher in water-limited, rainfed agricultural systems. We conclude that this downscaling approach of rice yield estimation using GBR is feasible across India and may complement current approaches for timely rice yield estimation required by insurance companies and government agencies.
- ItemEstimation of hourly near surface air temperature across Israel using an ensemble model(Basel : MDPI, 2020) Zhou, Bin; Erell, Evyatar; Hough, Ian; Shtein, Alexandra; Just, Allan C.; Novack, Victor; Rosenblatt, Jonathan; Kloog, ItaiMapping of near-surface air temperature (Ta) at high spatio-temporal resolution is essential for unbiased assessment of human health exposure to temperature extremes, not least given the observed trend of urbanization and global climate change. Data constraints have led previous studies to focus merely on daily Ta metrics, rather than hourly ones, making them insufficient for intra-day assessment of health exposure. In this study, we present a three-stage machine learning-based ensemble model to estimate hourly Ta at a high spatial resolution of 1 × 1 km2, incorporating remotely sensed surface skin temperature (Ts) from geostationary satellites, reanalysis synoptic variables, and observations from weather stations, as well as auxiliary geospatial variables, which account for spatio-temporal variability of Ta. The Stage 1 model gap-fills hourly Ts at 4 × 4 km2 from the Spinning Enhanced Visible and InfraRed Imager (SEVIRI), which are subsequently fed into the Stage 2 model to estimate hourly Ta at the same spatio-temporal resolution. The Stage 3 model downscales the residuals between estimated and measured Ta to a grid of 1 × 1 km2, taking into account additionally the monthly diurnal pattern of Ts derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) data. In each stage, the ensemble model synergizes estimates from the constituent base learners—random forest (RF) and extreme gradient boosting (XGBoost)—by applying a geographically weighted generalized additive model (GAM), which allows the weights of results from individual models to vary over space and time. Demonstrated for Israel for the period 2004–2017, the proposed ensemble model outperformed each of the two base learners. It also attained excellent five-fold cross-validated performance, with overall root mean square error (RMSE) of 0.8 and 0.9 °C, mean absolute error (MAE) of 0.6 and 0.7 °C, and R2 of 0.95 and 0.98 in Stage 1 and Stage 2, respectively. The Stage 3 model for downscaling Ta residuals to 1 km MODIS grids achieved overall RMSE of 0.3 °C, MAE of 0.5 °C, and R2 of 0.63. The generated hourly 1 × 1 km2 Ta thus serves as a foundation for monitoring and assessing human health exposure to temperature extremes at a larger geographical scale, helping to further minimize exposure misclassification in epidemiological studies.