49 results
Search Results
Now showing 1 - 10 of 49
- ItemPhase Transitions in Low-Dimensional Layered Double Perovskites: The Role of the Organic Moieties(Washington, DC : ACS, 2021) MartÃn-GarcÃa, Beatriz; Spirito, Davide; Biffi, Giulia; Artyukhin, Sergey; Francesco Bonaccorso, null; Krahne, RomanHalide double perovskites are an interesting alternative to Pb-containing counterparts as active materials in optoelectronic devices. Low-dimensional double perovskites are fabricated by introducing large organic cations, resulting in organic/inorganic architectures with one or more inorganic octahedra layers separated by organic cations. Here, we synthesized layered double perovskites based on 3D Cs2AgBiBr6, consisting of double (2L) or single (1L) inorganic octahedra layers, using ammonium cations of different sizes and chemical structures. Temperature-dependent Raman spectroscopy revealed phase transition signatures in both inorganic lattice and organic moieties by detecting variations in their vibrational modes. Changes in the conformational arrangement of the organic cations to an ordered state coincided with a phase transition in the 1L systems with the shortest ammonium moieties. Significant changes of photoluminescence intensity observed around the transition temperature suggest that optical properties may be affected by the octahedral tilts emerging at the phase transition.
- ItemHigh-performance SiGe HBTs for next generation BiCMOS technology(Bristol : IOP Publ., 2018) Rücker, Holger; Heinemann, BerndThis paper addresses fabrication aspects of SiGe heterojunction bipolar transistors which record high-speed performance. We previously reported fT values of 505 GHz, fMAX values of 720 GHz, and ring oscillator gate delays of 1.34 ps for these transistors. The impact of critical process steps on radio frequency performance is discussed. This includes millisecond annealing for enhanced dopant activation and optimization of the epitaxial growth process of the base layer. It is demonstrated that the use of a disilane precursor instead of silane can result in reduced base resistance and favorable device scalability.
- ItemStrain Engineered Electrically Pumped SiGeSn Microring Lasers on Si(Washington, DC : ACS, 2022) Marzban, Bahareh; Seidel, Lukas; Liu, Teren; Wu, Kui; Kiyek, Vivien; Zoellner, Marvin Hartwig; Ikonic, Zoran; Schulze, Joerg; Grützmacher, Detlev; Capellini, Giovanni; Oehme, Michael; Witzens, Jeremy; Buca, DanSiGeSn holds great promise for enabling fully group-IV integrated photonics operating at wavelengths extending in the mid-infrared range. Here, we demonstrate an electrically pumped GeSn microring laser based on SiGeSn/GeSn heterostructures. The ring shape allows for enhanced strain relaxation, leading to enhanced optical properties, and better guiding of the carriers into the optically active region. We have engineered a partial undercut of the ring to further promote strain relaxation while maintaining adequate heat sinking. Lasing is measured up to 90 K, with a 75 K T0. Scaling of the threshold current density as the inverse of the outer circumference is linked to optical losses at the etched surface, limiting device performance. Modeling is consistent with experiments across the range of explored inner and outer radii. These results will guide additional device optimization, aiming at improving electrical injection and using stressors to increase the bandgap directness of the active material.
- ItemNovel concept for VCSEL enhanced silicon photonic coherent transceiver(New York, NY : American Inst. of Physics, 2019) Seiler, Pascal M.; Ronniger, Gregor; Troppenz, Ute; Sigmund, Ariane; Moehrle, Martin; Peczek, Anna; Zimmermann, LarsWe present a novel concept for an integrated silicon photonic coherent transceiver using vertical-emitting laser sources at 1550 nm. In a state of the art external modulation configuration, we deploy a VCSEL on the transmit and a HCSEL on the receive side. We demonstrate the feasibility of this approach by externally modulating the VCSEL with QPSK at up to 28 Gbaud. We also perform experiments with the VCSEL-HCSEL configuration in a slave-master optical injection locking setup for future data center interconnects. The results show stable locking conditions and the VCSEL is detuned to perform predominant phase modulation. To the best of our knowledge, this is the first time direct phase modulation of a VCSEL under optical injection locking was demonstrated using two vertically emitting laser sources as master - and slave laser. © 2019 Author(s).
- ItemFabrication and investigation of three-dimensional ferroelectric capacitors for the application of FeRAM(New York : American Institute of Physics, 2016) Yeh, Chia-Pin; Lisker, Marco; Kalkofen, Bodo; Burte, Edmund P.Ferroelectric capacitors made by lead zirconate titanate (PZT) thin films and iridium electrodes are fabricated on three-dimensional structures and their properties are investigated. The iridium films are grown by Plasma Enhanced MOCVD at 300°C, while the PZT films are deposited by thermal MOCVD at different process temperatures between 450°C and 550°C. The step coverage and composition uniformity of the PZT films on trench holes and lines are investigated. Phase separation of PZT films has been observed on both 3D and planar structures. No clear dependences of the crystallization and composition of PZT on 3D structure topography have been found. STEM EDX line scans show a uniform Zr/(Zr+Ti) concentration ratio along the 3D profile but the variation of the Pb/(Zr+Ti) concentration ratio is large because of the phase separation. 3D ferroelectric capacitors show good ferroelectric properties but have much higher leakage currents than 2D ferroelectric capacitors. Nevertheless, during cycling tests the degradation of the remnant polarization between 2D and 3D capacitors is similar after 109 switching cycles. In addition, the sidewalls and bottoms of the 3D structures seem to have comparable remnant polarizations with the horizontal top surfaces.
- ItemEnhanced thermal stability of yttrium oxide-based RRAM devices with inhomogeneous Schottky-barrier(Melville, NY : American Inst. of Physics, 2020) Piros, Eszter; Petzold, Stefan; Zintler, Alexander; Kaiser, Nico; Vogel, Tobias; Eilhardt, Robert; Wenger, Christian; Molina-Luna, Leopoldo; Alff, LambertThis work addresses the thermal stability of bipolar resistive switching in yttrium oxide-based resistive random access memory revealed through the temperature dependence of the DC switching behavior. The operation voltages, current levels, and charge transport mechanisms are investigated at 25 °C, 85 °C, and 125 °C, and show overall good temperature immunity. The set and reset voltages, as well as the device resistance in both the high and low resistive states, are found to scale inversely with increasing temperatures. The Schottky-barrier height was observed to increase from approximately 1.02 eV at 25 °C to approximately 1.35 eV at 125 °C, an uncommon behavior explained by interface phenomena. © 2020 Author(s).
- ItemA comprehensive study of charge transport in Au-contacted graphene on Ge/Si(001)(Melville, NY : American Inst. of Physics, 2020) Sinterhauf, Anna; Bode, Simeon; Auge, Manuel; Lukosius, Mindaugas; Lippert, Gunther; Hofsäss, Hans-Christian; Wenderoth, MartinWe investigate the electronic transport properties of Au-contacted graphene on Ge/Si(001). Kelvin probe force microscopy at room temperature with an additionally applied electric transport field is used to gain a comprehensive understanding of macroscopic transport measurements. In particular, we analyze the contact pads including the transition region, perform local transport measurements in pristine graphene/Germanium, and explore the role of the semiconducting Germanium substrate. We connect the results from these local scale measurements with the macroscopic performance of the device. We find that a graphene sheet on a 2 μm Ge film carries approximately 10% of the current flowing through the device. Moreover, we show that an electronic transition region forms directly adjacent to the contact pads. This transition region is characterized by a width of >100 μm and a strongly increased sheet resistance acting as the bottleneck for charge transport. Based on Rutherford backscattering of the contact pads, we suggest that the formation of this transition region is caused by diffusion. © 2020 Author(s).
- ItemAn integrated 3.1-5.1 GHz pulse generator for ultra-wideband wireless localization systems(Göttingen : Copernicus, 2006) Fan, X.; Fischer, G.; Dietrich, B.This paper presents an implementation of an integrated Ultra-wideband (UWB), Binary-Phase Shift Keying (BPSK) Gaussian modulated pulse generator. VCO, multiplier and passive Gaussian filter are the key components. The VCO provides the carrier frequency of 4.1 GHz, the LC Gaussian filter is responsible for the pulse shaping in the baseband. Multiplying the baseband pulse and the VCO frequency shifts the pulse to the desired center frequency. The generated Gaussian pulse ocupppies the frequency range from 3.1 to 5.1 GHz with the center frequency at 4.1 GHz. Simulations and measured results show that this spectrum fulfills the mask for indoor communication systems given by the FCC (Federal Communications Commission, 2002). The total power consumption is 55 mW using a supply voltage of 2.5 V. Circuits are realized using the IHP 0.25 μm SiGe:C BiCMOS technology.
- ItemHigh-temperature high-sensitivity AlN-on-SOI Lamb wave resonant strain sensor(New York, NY : American Inst. of Physics, 2018) Dou, Shaoxu; Qi, Mengke; Chen, Cong; Zhou, Hong; Wang, Yong; Shang, Zhengguo; Yang, Jing; Wang, Dengpan; Mu, XiaojingA piezoelectric AlN-on-SOI structured MEMS Lamb wave resonator (LWR) is presented for high-temperature strain measurement. The LWR has a composite membrane of a 1 μm thick AlN film and a 30 μm thick device silicon layer. The excited acoustic waves include Rayleigh wave and Lamb waves. A tensile strain sensor has been prepared with one LWR mounted on a uniaxial tensile plate, and its temperature characteristics from 15.4°C to 250°C and tensile strain behaviors from 0 μϵ to 400 μϵ of Rayleigh wave and S4 mode Lamb wave were tested. The temperature test verifies the adaptability of the tensile strain sensor to temperature up to 250°C, and S4 mode Lamb wave and Rayleigh wave represent almost the same temperature characteristics. The strain test demonstrates that S4 mode Lamb wave shows much higher strain sensitivity (-0.48 ppm/μϵ) than Rayleigh wave (0.05 ppm/μϵ) and confirms its advantage of strain sensitivity. Finally, for this one-LWR strain sensor, a method of beat frequency between S4 mode Lamb wave and Rayleigh wave is proposed for temperature compensation and high-sensitivity strain readout.
- ItemHigh temperature reactive ion etching of iridium thin films with aluminum mask in CF4/O2/Ar plasma(New York : American Institute of Physics, 2016) Yeh, Chia-Pin; Lisker, Marco; Kalkofen, Bodo; Burte, Edmund P.Reactive ion etching (RIE) technology for iridium with CF4/O2/Ar gas mixtures and aluminum mask at high temperatures up to 350 °C was developed. The influence of various process parameters such as gas mixing ratio and substrate temperature on the etch rate was studied in order to find optimal process conditions. The surface of the samples after etching was found to be clean under SEM inspection. It was also shown that the etch rate of iridium could be enhanced at higher process temperature and, at the same time, very high etching selectivity between aluminum etching mask and iridium could be achieved.