13 results
Search Results
Now showing 1 - 10 of 13
- ItemEstradiol Removal by Adsorptive Coating of a Microfiltration Membrane(Basel : MDPI, 2021) Niavarani, Zahra; Breite, Daniel; Prager, Andrea; Abel, Bernd; Schulze, AgnesThis work demonstrates the enhancement of the adsorption properties of polyethersulfone (PES) microfiltration membranes for 17β-estradiol (E2) from water. This compound represents a highly potent endocrine-disrupting chemical (EDC). The PES membranes were modified with a hydrophilic coating functionalized by amide groups. The modification was performed by the interfacial reaction between hexamethylenediamine (HMD) or piperazine (PIP) as the amine monomer and trimesoyl chloride (TMC) or adipoyl chloride (ADC) as the acid monomer on the surface of the membrane using electron beam irradiation. The modified membranes and the untreated PES membrane were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water permeance measurements, water contact angle measurements, and adsorption experiments. Furthermore, the effects of simultaneous changes in four modification parameters: amine monomer types (HMD or PIP), acid monomer types (TMC or ADC), irradiation dosage (150 or 200 kGy), and the addition of toluene as a swelling agent, on the E2 adsorption capacity were investigated. The results showed that the adsorption capacities of modified PES membranes toward E2 are >60%, while the unmodified PES membrane had an adsorption capacity up to 30% for E2 under similar experimental conditions, i.e., an enhancement of a factor of 2. Next to the superior adsorption properties, the modified PES membranes maintain high water permeability and no pore blockage was observed. The highlighted results pave the way to develop efficient low-cost, stable, and high-performance adsorber membranes.
- ItemMicrostructure Evaluation and Impurities in La Containing Silicon Oxynitrides(Basel : MDPI, 2021) Hakeem, Abbas Saeed; Ali, Sharafat; Höche, Thomas; Drmosh, Qasem Ahmed; Khan, Amir Azam; Jonson, BoOxynitride glasses are not yet commercialised primarily due to the impurities present in the network of these glasses. In this work, we investigated the microstructure and instinctive defects in nitrogen rich La-Si-O-N glasses. Glasses were prepared by heating a powder mixture of pure La metal, Si3N4, and SiO2 in a nitrogen atmosphere at 1650-1800 °C. The microstructure and impurities in the glasses were examined by optical microscopy, scanning electron microscopy, atomic force microscopy, and transmission electron microscopy in conjunction with electron energy-loss spectroscopy. Analyses showed that the glasses contain a small amount of spherical metal silicide particles, mostly amorphous or poorly crystalline, and having sizes typically ranging from 1 µm and less. The amount of silicide was estimated to be less than 2 vol. %. There was no systematic relation between silicide formation and glass composition or preparation temperature. The microstructure examination revealed that the opacity of these nitrogen rich glasses is due to the elemental Si arise from the decomposition reaction of silicon nitride and silicon oxide, at a high temperature above ~1600 °C and from the metallic silicide particles formed by the reduction of silicon oxide and silicon nitride at an early stage of reaction to form a silicide intermetallic with the La metal.
- ItemTowards efficient initiators for two-photon induced polymerization: Fine tuning of the donor/acceptor properties(Cambridge : Royal Society of Chemistry, 2019) Holzer, Brigitte; Lunzer, Markus; Rosspeintner, Arnulf; Licari, Giuseppe; Tromayer, Maximilian; Naumov, Sergej; Lumpi, Daniel; Horkel, Ernst; Hametner, Christian; Ovsianikov, Aleksandr; Liska, Robert; Vauthey, Eric; Fröhlich, JohannesIn this work we present the design, synthesis and systematic investigation of the optical properties of symmetric triphenylamine (TPA)-substituted thiophenes. The use of electron-donating (-OMe, -tBu, -Me, -TMS), -neutral (-H) or -withdrawing (-F, -CN, -SO2Me) substituents gives rise to D-A-D based two-photon absorption (2PA) chromophores. The photophysical properties of these compounds, including one-photon absorption and 2PA using two-photon-excited fluorescence, were investigated in different organic solvents with varying polarity. The maximum 2PA cross sections prove to be strongly dependent on the nature of the TPA substituent and range between ~173 GM (Goeppert-Mayer units) and 379 GM. Although most of the investigated substances also exhibit high fluorescence quantum yields, two-photon absorption screening tests of an acrylate monomer formulation revealed the efficiency of these materials as 2PA photoinitiators. These results are supported by quantum chemical calculations of the spin density distribution indicating that the mechanism of polymerization initiation using acrylate monomer is favored by strong localization of the unpaired electrons in the triplet state on the C2 carbon of the thiophene moiety. © 2019 The Royal Society of Chemistry.
- ItemReaction of 1-propanol with Ozone in Aqueous Media(Basel : Molecular Diversity Preservation International, 2019) Reisz, Erika; Tekle-Röttering, Agnes; Naumov, Sergej; Schmidt, Winfried; Schmidt, Torsten C.The main aim of this work is to substantiate the mechanism of 1-propanol oxidation by ozone in aqueous solution when the substrate is present in large excess. Further goals are assessment of the products, their formation yields as well as the kinetic parameters of the considered reaction. The reaction of ozone with 1-propanol in aqueous solution occurs via hydride transfer, H-abstraction and insertion. Of these three mechanisms, the largest share is for hydride transfer. This implies the extraction of an hydride ion from the activated C-H group by O3 according to reaction: (C2H5)(H)(HO)C-H + O3 ?[(C2H5)(H)(HO)C-H+O3?]cage ?(C2H5)(H)(HO)C+ + HO3 -. The experimentally determined products and their overall formation yields with respect to ozone are: propionaldehyde-(60 ± 3)%, propionic acid-(27.4 ± 1.0)%, acetaldehyde-(4.9 ± 0.3)%, acetic acid-(0.3 ± 0.1)%, formaldehyde-(1.0 ± 0.1)%, formic acid-(4.6 ± 0.3)%, hydrogen peroxide- (11.1 ± 0.3)% and hydroxyl radical-(9.8 ± 0.3)%. The reaction of ozone with 1-propanol in aqueous media follows a second order kinetics with a reaction rate constant of (0.64±0.02)M-1·s-1 atpH = 7 and 23 °C. The dependence of the second order rate constant on temperature is described by the equation: ln kII = (27.17 ± 0.38)-(8180 ± 120) × T-1, which gives the activation energy, Ea = (68 ± 1) kJ mol-1 and pre-exponential factor, A = (6.3 ± 2.4) × 1011 M-1 s-1. The nature of products, their yields and the kinetic data can be used in water treatment. The fact that the hydride transfer is the main pathway in the 1-propanol/ozone system can probably be transferred on other systems in which the substrate is characterized by C-H active sites only. © 2019 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemIn situ Gelling Amphotericin B Nanofibers: A New Option for the Treatment of Keratomycosis(Lausanne : Frontiers Media, 2020) Göttel, Benedikt; Lucas, Henrike; Syrowatka, Frank; Knolle, Wolfgang; Kuntsche, Judith; Heinzelmann, Joana; Viestenz, Arne; Mäder, KarstenThe purpose of our research was the development of Amphotericin B-loaded in situ gelling nanofibers for the treatment of keratomycosis. Different formulation strategies were applied to increase the drug load of the sparingly water-soluble Amphotericin B in electrospun Gellan Gum/Pullulan fibers. These include bile salt addition, encapsulation in poly(lactic-co-glycolic acid) (PLGA) nanoparticles and formation of a polymeric Amphotericin B polyelectrolyte complex. The Amphotericin B polyelectrolyte complex (AmpB-Eu L) performed best and was very effective against the fungal strain Issatchenkia orientalis in vitro. The complex was characterized in detail by attenuated total reflection infrared spectroscopy, X-ray powder diffraction, and differential scanning calorimetry. A heat induced stress test was carried out to ensure the stability of the polyelectrolyte complex. To gain information about the cellular tolerance of the developed polyelectrolyte complex a new, innovative multilayered-stratified human cornea cell model was used for determination of the cellular toxicity in vitro. For a safe therapy, the applied ophthalmic drug delivery system has to be sterile. Sterilization by electron irradiation caused not degradation of pure Amphotericin B and also for the bile salt complex. Furthermore, the developed Amphotericin B polyelectrolyte complex was not degraded by the irradiation process. In conclusion, a new polyelectrolyte Amphotericin B complex has been found which retains the antifungal activity of the drug with sufficient stability against irradiation-sterilization induced drug degradation. Furthermore, in comparison with the conventional used eye drop formulation, the new AmpB-complex loaded nanofibers were less toxic to cornea cells in vitro. Electrospinning of the Amphotericin B polyelectrolyte complex with Gellan Gum/ Pullulan leads to the formation of nanofibers with in situ gelling properties, which is a new and promising option for the treatment of keratomycosis. © Copyright © 2020 Göttel, Lucas, Syrowatka, Knolle, Kuntsche, Heinzelmann, Viestenz and Mäder.
- ItemLaminin Adsorption and Adhesion of Neurons and Glial Cells on Carbon Implanted Titania Nanotube Scaffolds for Neural Implant Applications(Basel : MDPI, 2022) Frenzel, Jan; Kupferer, Astrid; Zink, Mareike; Mayr, Stefan G.Interfacing neurons persistently to conductive matter constitutes one of the key challenges when designing brain-machine interfaces such as neuroelectrodes or retinal implants. Novel materials approaches that prevent occurrence of loss of long-term adhesion, rejection reactions, and glial scarring are highly desirable. Ion doped titania nanotube scaffolds are a promising material to fulfill all these requirements while revealing sufficient electrical conductivity, and are scrutinized in the present study regarding their neuron–material interface. Adsorption of laminin, an essential extracellular matrix protein of the brain, is comprehensively analyzed. The implantation-dependent decline in laminin adsorption is revealed by employing surface characteristics such as nanotube diameter, (Formula presented.) -potential, and surface free energy. Moreover, the viability of U87-MG glial cells and SH-SY5Y neurons after one and four days are investigated, as well as the material’s cytotoxicity. The higher conductivity related to carbon implantation does not affect the viability of neurons, although it impedes glial cell proliferation. This gives rise to novel titania nanotube based implant materials with long-term stability, and could reduce undesirable glial scarring.
- ItemCarbon and Neon Ion Bombardment Induced Smoothing and Surface Relaxation of Titania Nanotubes(Basel : MDPI, 2021) Kupferer, Astrid; Mensing, Michael; Lehnert, Jan; Mändl, Stephan; Mayr, Stefan G.Titania nanotube arrays with their enormous surface area are the subject of much attention in diverse fields of research. In the present work, we show that not only 60 keV and 150 keV ion bombardment of amorphous titania nanotube arrays yields defect creation within the tube walls, but it also changes the surface morphology: the surface relaxes and smoothens in accordance with a curvature-driven surface material’s transport mechanism, which is mediated by radiation-induced viscous flow or radiation-enhanced surface diffusion, while the nanotubes act as additional sinks for the particle surface currents. These effects occur independently of the ion species: both carbon and neon ion bombardments result in comparable surface relaxation responses initiated by an ion energy of 60 keV at a fluence of 1 × 1016 ions/cm2. Using atomic force microscopy and contact angle measurements, we thoroughly study the relaxation effects on the surface topography and surface free energy, respectively. Moreover, surface relaxation is accompanied by further amorphization in surface-near regions and a reduction in the mass density, as demonstrated by Raman spectroscopy and X-ray reflectivity. Since ion bombardment can be performed on global and local scales, it constitutes a versatile tool to achieve well-defined and tunable topographies and distinct surface characteristics. Hence, different types of nanotube arrays can be modified for various applications.
- ItemCorrection: Towards efficient initiators for two-photon induced polymerization: Fine tuning of the donor/acceptor properties (Molecular Systems Design and Engineering (2019) DOI: 10.1039/c8me00101d)(Cambridge : Royal Society of Chemistry, 2019) Holzer, Brigitte; Lunzer, Markus; Rosspeintner, Arnulf; Licari, Giuseppe; Tromayer, Maximilian; Naumov, Sergej; Lumpi, Daniel; Horkel, Ernst; Hametner, Christian; Ovsianikov, Aleksandr; Liska, Robert; Vauthey, Eric; Fröhlich, JohannesThe authors regret that in the published article, affiliations b and c were inadvertently switched. The correct affiliations are shown here. The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers. © The Royal Society of Chemistry 2019.
- ItemEmploying Nanostructured Scaffolds to Investigate the Mechanical Properties of Adult Mammalian Retinae Under Tension(Basel : Molecular Diversity Preservation International, 2020) Juncheed, Kantida; Kohlstrunk, Bernd; Friebe, Sabrina; Dallacasagrande, Valentina; Maurer, Patric; Reichenbach, Andreas; Mayr, Stefan G.; Zink, MareikeNumerous eye diseases are linked to biomechanical dysfunction of the retina. However, the underlying forces are almost impossible to quantify experimentally. Here, we show how biomechanical properties of adult neuronal tissues such as porcine retinae can be investigated under tension in a home-built tissue stretcher composed of nanostructured TiO2 scaffolds coupled to a self-designed force sensor. The employed TiO2 nanotube scaffolds allow for organotypic long-term preservation of adult tissues ex vivo and support strong tissue adhesion without the application of glues, a prerequisite for tissue investigations under tension. In combination with finite element calculations we found that the deformation behavior is highly dependent on the displacement rate which results in Young’s moduli of (760–1270) Pa. Image analysis revealed that the elastic regime is characterized by a reversible shear deformation of retinal layers. For larger deformations, tissue destruction and sliding of retinal layers occurred with an equilibration between slip and stick at the interface of ruptured layers, resulting in a constant force during stretching. Since our study demonstrates how porcine eyes collected from slaughterhouses can be employed for ex vivo experiments, our study also offers new perspectives to investigate tissue biomechanics without excessive animal experiments. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemCurvature model for nanoparticle size effects on peptide fibril stability and molecular dynamics simulation data(Amsterdam [u.a.] : Elsevier, 2022) John, Torsten; Martin, Lisandra L.; Risselada, Herre Jelger; Abel, BerndNanostructured surfaces are widespread in nature and are being further developed in materials science. This makes them highly relevant for biomolecules, such as peptides. In this data article, we present a curvature model and molecular dynamics (MD) simulation data on the influence of nanoparticle size on the stability of amyloid peptide fibrils related to our research article entitled “Mechanistic insights into the size-dependent effects of nanoparticles on inhibiting and accelerating amyloid fibril formation” (John et al., 2022) [1]. We provide the code to perform MD simulations in GROMACS 4.5.7 software of arbitrarily chosen biomolecule oligomers adsorbed on a curved surface of chosen nanoparticle size. We also provide the simulation parameters and data for peptide oligomers of Aß40, NNFGAIL, GNNQQNY, and VQIYVK. The data provided allows researchers to further analyze our MD simulations and the curvature model allows for a better understanding of oligomeric structures on surfaces.