32 results
Search Results
Now showing 1 - 10 of 32
- ItemInvestigation of changes in crystalline and amorphous structure during deformation of nano-reinforced semi-crystalline polymers by space-resolved synchrotron saxs and waxs(Amsterdam : Elsevier, 2009) Schneider, K.; Schone, A.; Jun, T.-S.; Korsunsky, A.M.Complex structural changes occur in semi-crystalline polymers during deformation. In (nano-)filled systems the situation becomes even more complicated, since not only phase changes may take place, but also local (interfacial) failure between phases may occur. To help identify specific processes taking place within these systems, simultaneous small- and wide-angle X-ray scattering (SAXS/WAXS) measurements were performed using synchrotron radiation during in situ deformation. Using a highly focused beam, spatially resolved local information can be extracted by scanning the beam across the deformed/damaged region within the sample. The characteristic changes in the different phases are presented and discussed. While the study of WAXS patterns gives insight into the orientation and dimensions of the crystallites, SAXS provides information about the mutual arrangement of phases and the interfacial failure phenomena. Based on the analysis of the results obtained in our experiments it will be shown that the first changes in the crystalline phase appear long before macroscopic yielding of the sample is reached, i.e. the onset of irreversible deformation takes place. In the post-yield regime radical changes are observed in both the long- and short-range structures. It is concluded that the presence of nano-fillers exerts a strong influence on the establishment of microcrystalline structure, and hence also on the deformation behaviour at the microscopic scale.
- ItemVerbundprojekt Leichtbau mit thermoplastischen Nanocomposites (LB-Nanos) - Werkstoffentwicklung und -charakterisierung : Abschlussbericht(Hannover : Technische Informationsbibliothek (TIB), 2009) IPF[no abstract available]
- ItemRöntgen-Photoelektronenspektroskopie zur Charakterisierung der Zugänglichkeit und Reaktivität funktioneller Gruppen an Polymeroberflächen gegenüber großen Molekülen : Abschlussbericht zum BMBF-geförderten Forschungsprojekt(Hannover : Technische Informationsbibliothek (TIB), 2003) Simon, Frank; Frenzel, Ralf[no abstract available]
- ItemFlow imaging of hot PVC melt in a high temperature rheo-NMR-system(Dresden : Leibniz-Institut für Polymerforschung, 2002) Gottwald, A.; Kuran, P.; Körber, H.; Scheler, U.[no abstract available]
- ItemSubstratinduzierte Veränderungen von Zellen im Kontakt mit Polymermaterialien : Schlussbericht(Dresden : Institut für Polymerforschung Dresden, 2002) IPF[no abstract available]
- ItemEntwicklung von umweltgerechten Pulverlack-Top-Coats mit wasser- und schmutzabweisender Oberfläche - TV1 Pulverlacksysteme : Abschlussbericht zum BMBF-Projekt im Rahmen des Förderprogramms: "Forschung für Umwelt" im Bereich "Integrierter Umweltschutz in der Kunststoff- und Kautschukindustrie"(Hannover : Technische Informationsbibliothek (TIB), 2005) Appelhans, D.; Wang, Z.-G.; Zhuang, R.-C.; Stephan, U.; Synytska, A.[no abstract available]
- ItemPrüfung und Optimierung von ionischen Flockungshilfsmitteln auf Stärkebasis in technischen Prozessen unter Einbeziehung eines Online-Sensors zur Flockungsanalyse, Teilvorhaben 2: Adsorptions- und Koagulationsverhalten von Modell-Polyelektrolyten unter Einbeziehung kationischer Stärken an anorganischen Substanzen(Hannover : Technische Informationsbibliothek (TIB), 2005) Lunkwitz, K.; Schwarz., S.[no abstract available]
- ItemUntersuchung neuartiger kombinierter Vernetzungsmechanismen für die Pulverlackhärtung unter Einfluss von Katalysatoren, Teilprojekt 1/Teil 1; Untersuchungen zur thermischen und katalysierten Spaltung von Uretdionen als verkappungsmittelfrei blockierte Isocyanate, Teilprojekt 1/Teil 2; Einfluss von Additiven und Pigmenten auf die Grenzflächenphänomene bei der Pulverlackbeschichtung, Teilprojekt 2/Teil 3 : Abschlussbericht Teil 1 - 3 zum Teilprojekt 1 - 2 im Rahmen des F und E-Programmes zur Erweiterung der Anwendung der Pulverlackiertechnik(Dresden : Leibniz-Institut für Polymerforschung, 2000) Gedan-Smolka, Michaela; Meier Haack, Jochen; Lehmann, Frank; Grundke, Karina; Uhlmann, Petra; Wulf, Martin[no abstract available]
- ItemKonzept für das Innovationslabor "MoRe PTFE" (Modifiziertes und recyceltes Polytetrafluorethylen) für Phase II des Förderprogramms "ForMaT" (Forschung für den Markt im Team) als Bestandteil der BMBF-Innovationsinitiative Neue Länder "Unternehmen Region"(Hannover : Technische Informationsbibliothek (TIB), 2009) Lehmann, Dieter[no abstract available]
- ItemComparison of the molecular properties and morphology of polypropylenes irradiated under different atmospheres and after annealing(Hoboken, NJ [u.a.] : Wiley InterScience, 2006) Krause, Beate; Häußler, Liane; Voigt, DieterElectron-beam irradiation, a well-known way of generating long-chain branching, was used to modify polypropylene. Samples were investigated with differential scanning calorimetry, polarized light microscopy, and size exclusion chromatography. Independently of the atmosphere, postannealing led to the deactivation of residual radicals and to the reduction of the nucleus density. In comparison with the initial polypropylene, the crystallization temperatures increased for nonannealed samples but decreased for annealed samples. Stable products were obtained only by irradiation in nitrogen followed by annealing. A reaction including free radicals with oxygen in the ambient atmosphere led to increasing molar mass degradation and the formation of long-chain branching after Storage. © 2006 Wiley Periodicals, Inc.