Search Results
Laser-induced reactive microplasma for etching of fused silica
2020, Ehrhardt, Martin, Lorenz, Pierre, Han, Bing, Zimmer, Klaus
The ultra-precise machining (UPM) of surfaces with contact-free, beam-based technologies enables the development of flexible and reliable fabrication methods by non-vacuum processes for future application in advanced industrial fields. Laser machining by laser ablation features limitations for ultra-precise machining due to the depth precision, the surface morphology, and laser-induced defect formation. Contrary to physically-based etching, chemical-based dry and wet processing offer high quality, low damage material removal. In order to take advantage of both principles, a combined laser-plasma process is introduced. Ultra-short laser pulses are used to induce a free-standing microplasma in a CF4 gas atmosphere due to an optical breakdown. CF4 gas, with a pressure of 800–900 mbar, is ionized only near the focal point and reactive species are generated therein. Reactive species of the laser-induced microplasma can interact with the surface atoms of the target material forming volatile products. The release of these products is enhanced by the pulsed, laser-induced plasma resulting in material etching. In the present study, SiO2 surfaces were etched with reactive species of CF4 microplasma generated by their laser-induced break down with 775 nm pulses of an fs-laser (150 fs) at a repetition rate of 1 kHz. The dependency of the depth, the width, and the morphology of the etching pits were analysed systematically against the process parameters used. In particular, a linear increase of the etching depth up to 10 µm was achieved. The etched surface appears smooth without visible cracks, defects, or LIPSS (Laser-induced periodic surface structures). © 2020, The Author(s).
Dry etching of monocrystalline silicon using a laser-induced reactive micro plasma
2021, Heinke, Robert, Ehrhardt, Martin, Lorenz, Pierre, Zimmer, Klaus
Dry etching is a prevalent technique for pattern transfer and material removal in microelectronics, optics and photonics due to its high precision material removal with low surface and subsurface damage. These processes, including reactive ion etching (RIE) and plasma etching (PE), are performed at vacuum conditions and provide high selectivity and vertical side wall etched patterns but create high costs and efforts in maintenance due to the required machinery. In contrast to electrically generated plasmas, laser-induced micro plasmas are controllable sources of reactive species in gases at atmospheric pressure that can be used for dry etching of materials. In the present study, we have demonstrated the laser-induced plasma etching of monocrystalline silicon. A Ti:Sapphire laser has been used for igniting an optically pumped plasma in a CF4/O2 gas mixture near atmospheric pressure. The influence of process parameters, like substrate temperature, O2 concentration, plasma-surface distance, etching duration, pulse energy and crystal orientation on etching rate and surface morphology has been investigated. Typical etching rates of 2–12 µm x min−1 can be achieved by varying mentioned parameters with a decreasing etching rate during the process. Different morphologies can be observed due to the parameters set, smooth as well as rough surfaces or even inverted pyramids. The presented etching method provides an approach for precise machining of silicon surfaces with good surface qualities near atmospheric pressure and sufficiently high material removal rates for ultraprecise surface machining. © 2021 The Author(s)