5 results
Search Results
Now showing 1 - 5 of 5
- ItemGraphene Q-switched Yb:KYW planar waveguide laser(New York, NY : American Inst. of Physics, 2015) Kim, Jun Wan; Young Choi, Sun; Aravazhi, Shanmugam; Pollnau, Markus; Griebner, Uwe; Petrov, Valentin; Bae, Sukang; Jun Ahn, Kwang; Yeom, Dong-Il; Rotermund, FabianA diode-pumped Yb:KYW planar waveguide laser, single-mode Q-switched by evanescent-field interaction with graphene, is demonstrated for the first time. Few-layer graphene grown by chemical vapor deposition is transferred onto the top of a guiding layer, which initiates stable Q-switched operation in a 2.4-cm-long waveguide laser operating near 1027 nm. Average output powers up to 34 mW and pulse durations as short as 349 ns are achieved. The measured output beam profile, clearly exhibiting a single mode, agrees well with the theoretically calculated mode intensity distribution inside the waveguide. As the pump power is increased, the repetition rate and pulse energy increase from 191 to 607 kHz and from 7.4 to 58.6 nJ, respectively, whereas the pulse duration decreases from 2.09 μs to 349 ns.
- ItemGraphene mode-locked Tm,Ho-codoped crystalline garnet laser producing 70-fs pulses near 21 µm(Washington, DC : OSA, 2019) Zhao, Yongguang; Chen, Weidong; Wang, Li; Wang, Yicheng; Pan, Zhongben; Dai, Xiaojun; Yuan, Hualei; Cai, Huaqiang; Zhang, Yan; Bae, Ji Eun; Park, Tae Gwan; Rotermund, Fabian; Loiko, Pavel; Serres, Josep Maria; Mateos, Xavier; Shen, Deyuan; Griebner, Uwe; Petrov, ValentinBilayer graphene synthesized by chemical vapor deposition is successfully applied as a saturable absorber (SA) for the passive mode-locking of a Tm,Ho:CLNGG laser at 2093nm. Near transform-limited pulses as short as 70 fs, i.e., 10 optical cycles, are produced at a 89 MHz repetition rate with 69 mW average output power. To the best of our knowledge, these are the shortest pulses ever reported from graphene-SA mode-locked Tm, or Ho-lasers in the 2 µm spectral region, including bulk and fiber lasers.
- ItemControl of etch pit formation for epitaxial growth of graphene on germanium(Melville, NY : American Inst. of Physics, 2019) Becker, Andreas; Wenger, Christian; Dabrowski, JarekGraphene epitaxy on germanium by chemical vapor deposition is a promising approach to integrate graphene into microelectronics, but the synthesis is still accompanied by several challenges such as the high process temperature, the reproducibility of growth, and the formation of etch pits during the process. We show that the substrate cleaning by preannealing in molecular hydrogen, which is crucial to successful and reproducible graphene growth, requires a high temperature and dose. During both substrate cleaning and graphene growth, etch pits can develop under certain conditions and disrupt the synthesis process. We explain the mechanisms how these etch pits may form by preferential evaporation of substrate, how substrate topography is related to the state of the cleaning process, and how etch pit formation during graphene growth can be controlled by choice of a sufficiently high precursor flow. Our study explains how graphene can be grown reliably on germanium at high temperature and thereby lays the foundation for further optimization of the growth process. © 2019 Author(s).
- ItemCVD-Grown CNTs on Basalt Fiber Surfaces for Multifunctional Composite Interphases(Basel : MDPI, 2016) Förster, Theresa; Hao, Bin; Mäder, Edith; Simon, Frank; Wölfel, Enrico; Ma, Peng-ChengChemical vapor deposition (CVD) is used as a method for the synthesis of carbon nanotubes (CNT) on substrates, most commonly pre-treated by a metal-catalyst. In this work, the capability of basalt fiber surfaces was investigated in order to stimulate catalyst-free growth of carbon nanotubes. We have carried out CVD experiments on unsized, sized, and NaOH-treated basalt fibers modified by growth temperature and a process gas mixture. Subsequently, we investigated the fiber surfaces by SEM, AFM, XPS and carried out single fiber tensile tests. Growth temperatures of 700 °C as well as 800 °C may induce CNT growth, but depending on the basalt fiber surface, the growth process was differently affected. The XPS results suggest surficial iron is not crucial for the CNT growth. We demonstrate that the formation of a corrosion shell is able to support CNT networks. However, our investigations do not expose distinctively the mechanisms by which unsized basalt fibers sometimes induce vertically aligned CNT carpets, isotropically arranged CNTs or no CNT growth. Considering data from the literature and our AFM results, it is assumed that the nano-roughness of surfaces could be a critical parameter for CNT growth. These findings will motivate the design of future experiments to discover the role of surface roughness as well as surface defects on the formation of hierarchical interphases.
- ItemStudies towards synthesis, evolution and alignment characteristics of dense, millimeter long multiwalled carbon nanotube arrays(Frankfurt, M. : Beilstein-Institut zur Förderung der Chemischen Wissenschaften, 2011) Mahanandia, P.; Schneider, J.J.; Engel, M.; Stühn, B.; Subramanyam, S.V.; Nanda, K.K.We report the synthesis of aligned arrays of millimeter long carbon nanotubes (CNTs), from benzene and ferrocene as the molecular precursor and catalyst respectively, by a one-step chemical vapor deposition technique. The length of the grown CNTs depends on the reaction temperature and increases from ~85 μm to ~1.4 mm when the synthesis temperature is raised from 650 to 1100°C, while the tube diameter is almost independent of the preparation temperature and is ~80 nm. The parallel arrangement of the CNTs, as well as their tube diameter can be verified spectroscopically by small angle X-ray scattering (SAXS) studies. Based on electron diffraction scattering (EDS) studies of the top and the base of the CNT films, a root growth process can be deduced.