5 results
Search Results
Now showing 1 - 5 of 5
- ItemTransmitters and receivers in SiGe BiCMOS technology for sensitive gas spectroscopy at 222 - 270 GHz(New York, NY : American Inst. of Physics, 2019) Schmalz, K.; Rothbart, N.; Eissa, M.H.; Borngräber, J.; Kissinger, D.; HĂ¼bers, H.-W.This paper presents transmitter and receiver components for a gas spectroscopy system. The components are fabricated in IHP's 0.13 μm SiGe BiCMOS technology. Two fractional-N phase-locked loops are used to generate dedicated frequency ramps for the transmitter and receiver and frequency shift keying for the transmitter. The signal-to-noise ratio (SNR) for the absorption line of gaseous methanol (CH 3 OH) at 247.6 GHz is used as measure for the performance of the system. The implemented mixer-first receiver allows a high performance of the system due to its linearity up to an input power of -10 dBm. Using a transmitter-array with an output power of 7 dBm an SNR of 4660 (integration time of 2 ms for each data point) was obtained for the 247.6 GHz absorption line of CH 3 OH at 5 Pa. We have extended our single frequency-band system for 228 - 252 GHz to a 2-band system to cover the range 222 - 270 GHz by combining corresponding two transmitters and receivers with the frequency bands 222 - 256 GHz and 250 - 270 GHz on single transmitter- and receiver-chips. This 2-band operation allows a parallel spectra acquisition and therefore a high flexibility of data acquisition for the two frequency-bands. The 50 GHz bandwidth allows for highly specific and selective gas sensing. © 2019 Author(s).
- ItemFar field imaging of a dielectric inclusion(Bristol : IOP Publ., 2015) Wahab, Abdul; Ahmed, Naveed; Abbas, TasawarA non-iterative topological sensitivity framework for guaranteed far field detection of a dielectric inclusion is presented. The cases of single and multiple measurements of the electric far field scattering amplitude at a fixed frequency are taken into account. The performance of the algorithm is analyzed theoretically in terms of resolution, stability, and signal-to-noise ratio.
- ItemFirst stellar photons for an integrated optics discrete beam combiner at the William Herschel Telescope(Washington, DC : The Optical Society, 2021) Nayak, Abani Shankar; Labadie, Lucas; Sharma, Tarun Kumar; Piacentini, Simone; Corrielli, Giacomo; Osellame, Roberto; Gendron, Éric; Buey, Jean-Tristan M.; Chemla, Fanny; Cohen, Mathieu; Bharmal, Nazim A.; Bardou, Lisa F.; Staykov, Lazar; Osborn, James; Morris, Timothy J.; Pedretti, Ettore; Dinkelaker, Aline N.; Madhav, Kalaga V.; Roth, Martin M.We present the first on-sky results of a four-telescope integrated optics discrete beam combiner (DBC) tested at the 4.2mWilliamHerschel Telescope. The device consists of a four-input pupil remapper followed by a DBC and a 23-output reformatter. The whole device was written monolithically in a single alumino-borosilicate substrate using ultrafast laser inscription. The device was operated at astronomical H-band (1.6 μm), and a deformable mirror along with a microlens array was used to inject stellar photons into the device. We report the measured visibility amplitudes and closure phases obtained on Vega and Altair that are retrieved using the calibrated transfer matrix of the device. While the coherence function can be reconstructed, the on-sky results show significant dispersion from the expected values. Based on the analysis of comparable simulations, we find that such dispersion is largely caused by the limited signal-to-noise ratio of our observations. This constitutes a first step toward an improved validation of theDBCas a possible beam combination scheme for long-baseline interferometry. © 2021 Optical Society of America.
- ItemDimensioning of a multibeam coherent photonic beamformer fed by a phased array antenna(Washington, DC : Optical Society of America, OSA, 2018) Drummond, Miguel V.; Duarte, Vanessa C.; Albuquerque, André; Nogueira, Rogério N.; Stampoulidis, Leontios; Winzer, Georg; Zimmermann, Lars; Clements, Stephen; Anzalchi, JavadThe design and dimensioning of a photonic-aided payload for a multi-beam high-throughput communications satellite is a complex problem in which the antenna, RF and photonic subsystems must be considered as a whole for achieving best performance with lowest mass and power consumption. In this paper, we propose and dimension the receiving stage of a communications satellite comprising a phased array antenna (PAA) feeding a multibeam photonic beamforming system (PBS). The PBS uses a single wavelength and resorts to heterodyne detection such that the retrieved beams are frequency downconverted. End-to-end system modeling shows that the complexity of the PAA and PBS can be traded-o for signal-to-noise ratio (SNR) or power consumption without compromising the beam width. The dimensioning of a realistic scenario is presented, showing that an SNR and beam crosstalk on the order of 20 dB are achievable with a total power consumption below 1 kW for a typical number of 100 antenna elements (AEs).
- ItemVibrational sum-frequency generation spectroscopy of lipid bilayers at repetition rates up to 100 kHz(Melville, NY : American Institute of Physics, 2018) Yesudas, Freeda; Mero, Mark; Kneipp, Janina; Heiner, ZsuzsannaBroadband vibrational sum-frequency generation (BB-VSFG) spectroscopy has become a well-established surface analytical tool capable of identifying the orientation and structure of molecular layers. A straightforward way to boost the sensitivity of the technique could be to increase the laser repetition rate beyond that of standard BB-VSFG spectrometers, which rely on Ti:sapphire lasers operating at repetition rates of 1-5 kHz. Nevertheless, possible thermally induced artifacts in the vibrational spectra due to higher laser average powers are unexplored. Here, we discuss laser power induced temperature accumulation effects that distort the BB-VSFG spectra of 1,2-diacyl-sn-glycero-3-phosphocholine at an interface between two transparent phases at repetition rates of 5, 10, 50, and 100 kHz at constant pulse energy. No heat-induced distortions were found in the spectra, suggesting that the increase in the laser repetition rate provides a feasible route to an improved signal-to-noise ratio or shorter data acquisition times in BB-VSFG spectroscopy for thin films on transparent substrates. The results have implications for future BB-VSFG spectrometers pushing the detection limit for molecular layers with low surface coverage.