Filters

2012 - 20203

More filters

2021 - 20223
Reset filters

Settings

DDC: 530 × Subject: YBCO ×

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Influence of the magnet aspect ratio on the dynamic stiffness of a rotating superconducting magnetic bearing
    (Bristol : IOP Publ., 2020) Espenhahn, Tilo; Wunderwald, Florian; Möller, Marcel; Sparing, Maria; Hossain, Mahmud; Fuchs, Günter; Abdkader, Anwar; Cherif, Chokri; Nielsch, Kornelius; Hühne, Ruben
    Rotating superconducting bearings promise great potential in applications due to their frictionless operation. However, these bearings show a lower dynamic stiffness and damping coefficient compared to ball bearings. In this paper we studied a bearing consisting of a fixed YBCO ring and a rotating magnet above the superconductor. The influence of the magnet aspect ratio on the dynamic stiffness of the bearing was investigated in order to find an optimized size. To change the aspect ratio, we kept the inner diameter of the ring constant and reduced the outer diameter while increasing the ring height. In addition to these magnets, one magnet with a reduced cross-sectional area was studied. The aspect ratio selection was based on preliminary magnetic flux density simulations, which compared the magnetic flux density distribution and the potential radial force for different aspect ratios. To conduct the measurements, the field-cooled magnets were displaced in a lateral direction and then released, resulting in a damped oscillation. The dynamic stiffness constants were calculated for each bearing from the relation of three axis acceleration measurements for different field cooling heights. The comparison of the stiffness constants for the different bearings revealed an optimal aspect ratio for the given YBCO ring. This optimum is almost independent from the cooling height. The comparison between the two magnet rings with similar diameters and different heights was similar for the bearing characteristics at a low cooling height, whereas a significant reduction of stiffness was observed with a larger cooling distance. The difference is bigger for the magnet with a reduced height. The optimal aspect ratio as well as the stiffness dependence on the cross-sectional area was confirmed by simulations of the magnetic flux density distribution. © 2019 IOP Publishing Ltd.
  • Thumbnail Image
    Item
    Addition of Iridium to the Biopolymer Mediated Synthesis of YBa2Cu3O7 δ
    (Amsterdam [u.a.] : Elsevier, 2012) Wimbush, Stuart C.; Marx, Werner; Barth, Andreas; Hall, Simon R.
    This work represents the first study into the addition of iridium into the solgel synthesis of the high temperature superconductor YBa2Cu3O7δ (Y123). Through a biopolymermediated synthetic approach, the homogeneous nature of the precursor sol and the preferred nucleation and growth of Y123 phases allow for a high yield of superconducting nanoparticles with no suppression of the superconducting critical temperature, even at high levels (40 wt%) of iridium addition. We attribute this to iridium not substituting into the Y123 crystal lattice, instead forming an associate phase.
  • Thumbnail Image
    Item
    Magnetic granularity in pulsed laser deposited YBCO films on technical templates at 5 K
    (Bristol : IOP Publ., 2017-9-4) Lao, M.; Hecher, J.; Pahlke, P.; Sieger, M.; Hühne, R.; Eisterer, M.
    The manifestation of granularity in the superconducting properties of pulsed laser deposited YBCO films on commercially available metallic templates was investigated by scanning Hall probe microscopy at 5 K and was related to local orientation mapping of the YBCO layer. The YBCO films on stainless steel templates with a textured buffer layer of yttrium stabilized ZrO2 grown by alternating beam assisted deposition have a mean grain size of less than with a sharp texture. This results in a homogeneous trapped field profile and spatial distribution of the current density. On the other hand, YBCO films on biaxially textured NiW substrates show magnetic granularity that persists down to a temperature of 5 K and up to an applied magnetic field of 4 T. The origin of the granular field profile is directly correlated to the microstructural properties of the YBCO layer adopted from the granular NiW substrate which leads to a spatially inhomogeneous current density. Grain-to-grain in-plane tilts lead to grain boundaries that obstruct the current while out-of-plane tilts mainly affect the grain properties, resulting in areas with low . Hence, not all grain boundaries cause detrimental effects on since the orientation of individual NiW grains also contributes to observed inhomogeneity and granularity.