Filters

2019 - 201922020 - 20211

More filters

2020 - 20233
Reset filters

Settings

DDC: 530 × Subject: fuel cell ×

Search Results

Now showing 1 - 3 of 3
  • Thumbnail Image
    Item
    Electrocatalytic fuel cell desalination for continuous energy and freshwater generation
    (Maryland Heights, MO : Cell Press, 2021) Zhang, Yuan; Wang, Lei; Presser, Volker
    Advanced hydrogen technologies contribute essentially to the decarbonization of our industrialized world. Large-scale hydrogen production would benefit from using the abundantly available water reservoir of our planet’s oceans. Current seawater-desalination technologies suffer from high energy consumption, high cost, or low performance. Here, we report technology for water desalination at seawater molarity, based on a polymer ion-exchange membrane fuel cell. By continuously supplying hydrogen and oxygen to the cell, a 160-mM concentration decrease from an initial value of 600 mM is accomplished within 40 h for a 55-mL reservoir. This device’s desalination rate in 600 mM NaCl and substitute ocean water are 18 g/m2/h and 16 g/m2/h, respectively. In addition, by removing 1 g of NaCl, 67 mWh of electric energy is generated. This proof-of-concept work shows the high application potential for sustainable fuel-cell desalination (FCD) using hydrogen as an energy carrier.
  • Thumbnail Image
    Item
    Switchable magnetic bulk photovoltaic effect in the two-dimensional magnet CrI3
    (London : Nature Publishing Group, 2019) Zhang, Y.; Holder, T.; Ishizuka, H.; de Juan, F.; Nagaosa, N.; Felser, C.; Yan, B.
    The bulk photovoltaic effect (BPVE) rectifies light into the dc current in a single-phase material and attracts the interest to design high-efficiency solar cells beyond the pn junction paradigm. Because it is a hot electron effect, the BPVE surpasses the thermodynamic Shockley–Queisser limit to generate above-band-gap photovoltage. While the guiding principle for BPVE materials is to break the crystal centrosymmetry, here we propose a magnetic photogalvanic effect (MPGE) that introduces the magnetism as a key ingredient and induces a giant BPVE. The MPGE emerges from the magnetism-induced asymmetry of the carrier velocity in the band structure. We demonstrate the MPGE in a layered magnetic insulator CrI3, with much larger photoconductivity than any previously reported results. The photocurrent can be reversed and switched by controllable magnetic transitions. Our work paves a pathway to search for magnetic photovoltaic materials and to design switchable devices combining magnetic, electronic, and optical functionalities.
  • Thumbnail Image
    Item
    Extruded polycarbonate/Di-Allyl phthalate composites with ternary conductive filler system for bipolar plates of polymer electrolyte membrane fuel cells
    (Bristol : IOP Publ., 2019) Naji, Ahmed; Krause, Beate; Pötschke, Petra; Ameli, Amir
    Here, we report multifunctional polycarbonate (PC)-based conductive polymer composites (CPCs) with outstanding performance manufactured by a simple extrusion process and intended for use in bipolar plate (BPP) applications in polymer electrolyte membrane (PEM) fuel cells. CPCs were developed using a ternary conductive filler system containing carbon nanotube (CNT), carbon fiber (CF), and graphite (G) and by introducing di-allyl phthalate (DAP) as a plasticizer to PC matrix. The samples were fabricated using twin-screw extrusion followed by compression molding and the microstructure, electrical conductivity, thermal conductivity, and mechanical properties were investigated. The results showed a good dispersion of the fillers with some degree of interconnection between dissimilar fillers. The addition of DAP enhanced the electrical conductivity and tensile strength of the CPCs. Due to its plasticizing effect, DAP reduced the processing temperature by 75 °C and facilitated the extrusion of CPCs with filler loads as high as 63 wt% (3 wt% CNT, 30 wt% CF, 30 wt% G). Consequently, CPCs with the through-plane electrical, in-plane electrical and thermal conductivities and tensile strength of 4.2 S cm-1, 34.3 S cm-1, 2.9 W m-1 K-1, and 75.4 MPa, respectively, were achieved. This combination of properties indicates the potential of PC-based composites enriched with hybrid fillers and plasticizers as an alternative material for BPP application.