Search Results

Now showing 1 - 4 of 4
  • Item
    Laser Patterning of CIGS thin Films with 1550 nm Nanosecond Laser Pulses
    (Amsterdam [u.a.] : Elsevier, 2016) Ehrhardt, Martin; Lorenz, Pierre; Bayer, Lukas; Zagoranskiy, Igor; Zimmer, Klaus
    The results of laser scribing experiments of CIGS thin films deposited on Mo-coated stainless steel sheets, using laser pulses with a wavelength of 1550 nm and a pulse duration of 6 ns, are presented in this study. It is shown that a removal of the CIGS from the Mo film is possible without edge melting of the CIGS or damaging of the Mo. The critical parameter for inducing the delamination lift-off process of the CIGS from the Mo was identified to be the scribing speed of the laser. In dependence on the laser parameters two different material removal processes were found. For a low pulse overlap the laser pulse penetrates the CIGS film and is absorbed in the interface between the CIGS and the Mo causing a lift-off process of the CIGS from the Mo back contact. For a high pulse overlap an ablation process starting from the top side of the CIGS film was found. The composition and morphology of the sample material after the laser patterning were analysed by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and micro-Raman spectroscopy.
  • Item
    Magnetically induced anisotropy of flux penetration into strong-pinning superconductor/ferromagnet bilayers
    (Bristol : Institute of Physics Publishing, 2019) Simmendinger, J.; Hanisch, J.; Bihler, M.; Ionescu, A.M.; Weigand, M.; Sieger, M.; Hühne, R.; Rijckaert, H.; Van Driessche, I.; Schütz, G.; Albrecht, J.
    We studied the impact of soft ferromagnetic permalloy (Py) on the shielding currents in a strong-pinning superconductor - YBa2Cu3O7-δ with Ba2Y(Nb/Ta)O6 nano-precipitates - by means of scanning transmission x-ray microscopy. Typically and in particular when in the thin film limit, superconductor/ferromagnet (SC/FM) bilayers exhibit isotropic properties of the flux line ensemble at all temperatures. However, in elements with small aspect ratio a significant anisotropy in flux penetration is observed. We explain this effect by local in-plane fields arising from anisotropic magnetic stray fields originated by the ferromagnet. This leads to direction-dependent motion of magnetic vortices inside the SC/FM bilayer. Our results demonstrate that small variations of the magnetic properties can have huge impact on the superconductor.
  • Item
    Universal scaling behavior of the upper critical field in strained FeSe0.7Te0.3 thin films
    (Bristol : Institute of Physics Publishing, 2018) Yuan, F.; Grinenko, V.; Iida, K.; Richter, S.; Pukenas, A.; Skrotzki, W.; Sakoda, M.; Naito, M.; Sala, A.; Putti, M.; Yamashita, A.; Takano, Y.; Shi, Z.; Nielsch, K.; Hühne, R.
    Revealing the universal behaviors of iron-based superconductors (FBS) is important to elucidate the microscopic theory of superconductivity. In this work, we investigate the effect of in-plane strain on the slope of the upper critical field H c2 at the superconducting transition temperature T c (i.e. -dH c2/dT) for FeSe0.7Te0.3 thin films. The in-plane strain tunes T c in a broad range, while the composition and disorder are almost unchanged. We show that -dH c2/dT scales linearly with T c, indicating that FeSe0.7Te0.3 follows the same universal behavior as observed for pnictide FBS. The observed behavior is consistent with a multiband superconductivity paired by interband interaction such as sign change s ± superconductivity.
  • Item
    Micromagnetic investigation of domain and domain wall evolution through the spin-reorientation transition of an epitaxial NdCo5 film
    ([London] : IOP, 2017-3-1) Seifert, Marietta; Schultz, Ludwig; Schäfer, Rudolf; Hankemeier, Sebastian; Frömter, Robert; Oepen, Hans Peter; Neu, Volker
    The domain pattern and the domain wall microstructure throughout the spin-reorientation transition of an epitaxial NdCo5 thin film are investigated by micromagnetic simulations. The temperature-dependent anisotropy constants K1 and K2, which define the anisotropy energy term in the model, are chosen to reflect the easy axis—easy cone—easy plane spin-reorientation transition observed in epitaxial NdCo5 thin films. Starting at the high-temperature easy c-axis regime, the anisotropy constants are changed systematically corresponding to a lowering of the temperature of the system. The character of the domain walls and their profiles are analysed. The calculated domain configurations are compared to the experimentally observed temperature-dependent domain structure of an in-plane textured NdCo5 thin film.