Search Results
Linear and nonlinear relations between DSC parameters and elastic moduli for chemically and thermally treated human hair
Against the practical context of thermal straightening, hair samples were obtained with a chemical (bleaching) as well as a cumulative thermal history (0–800 s, 200 °C). On these samples, tensile testing and DSC analysis, both in the wet state, were conducted to obtain the elastic moduli Ew as well as denaturation temperatures TD and enthalpies ΔHD. 3D plots show overall linearity for the relationships between the parameters for natural hair. For bleached hair, pronounced nonlinearities develop beyond 300 s of thermal treatment. At this stage, TD as well as Ew approaches limiting values, consistent with the state of a highly cross-linked, thermoset polymer. 2D projections are used to investigate the correlations between pairs of parameters. The results show that bleaching imparts a specific sensitivity for thermal damage, namely, to the matrix proteins, which more readily than the intermediate filaments (IF) turn into a thermoset. Overall, correlations between parameters hold well prior to the thermoset range. It is thus suggested that tensile testing to determine the elastic modulus and DSC come to consistent and equivalent results, at least, for the current experimental context. However, while Ew combines contributions of IFs and matrix, DSC differentiates the specific property changes of these components. © 2019, The Author(s).
Imine-Based Dynamic Polymer Networks as Photoprogrammable Amine Sensing Devices
Here, we describe a “smart” polymeric material, which is able to readily detect and discriminate amine vapors. The dynamic imine-based network can be conveniently prepared by mixing a commercially available, amino-functionalized polysiloxane with small amounts of a diarylethene dialdehyde. The photoswitchable crosslinker allows for reversible imprinting of custom-designed patterns on the polymer surface with (sun)light and thus enables noninvasive information storage in the material, which before, during, and after amine exposure can readily be decoded with commonly used smartphone apps. This feature along with the self-healing nature of the dynamic polymer, an easy recycling and manufacturing procedure, and the overall low cost and toxicity render this material advantageous to develop low-cost and practical amine sensing devices for the broad public. © 2019 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2378–2382
Thermoresponsive zwitterionic poly(phosphobetaine) microgels: Effect of macro-RAFT chain length and cross-linker molecular weight on their antifouling properties
Adsorption of proteins on biological surfaces is a detrimental phenomenon that reduces the work-life of the implants in various biomedical applications. Here, we synthesized a new class of thermoresponsive zwitterionic poly(phosphobetaine) (PMPC) microgel with excellent surface antifouling property by macro-RAFT mediated thiol-epoxy click reaction. End-group modified zwitterionic PMPC homopolymers with well-defined molecular weight and narrow dispersity were grafted onto poly(N-vinylcaprolactam-co-glycidyl methacrylate) (PVG) copolymer backbone followed by addition of a cross-linker, leading to microgel formation. While no upper critical solution temperature (UCST) was found in poly(N-vinylcaprolactam-co-glycidyl methacrylate-g-2-methacryloyloxyethyl phosphorylcholine) (PVGP) graft copolymers, the corresponding microgels exhibited both UCST and lower critical solution temperature (LCST) transitions, related to the swelling and collapse of PMPC and poly (N-vinylcaprolactam) (PVCL) components respectively. An increase in the molecular chain length of the PMPC increased the shifting of UCST and LCST of the microgels to higher temperatures, due to the ability of zwitterionic groups to coordinate a large number of water molecules. The effect of the variation in the molecular weights of amphiphilic poly(ethylene glycol) diamine (PEG-NH2) cross-linker was also reflected in both temperature and salt responsiveness of the microgels. The efficacy of the microgels as potential antifouling materials was further studied by fluorescence microscopy and XPS analysis on microgel coatings treated with FITC-BSA solution and pure BSA solution respectively. Lower protein adsorption was observed for microgels grafted with higher molecular chain length of PMPC, whereas, the microgels synthesized using higher molecular weight PEG-NH2 diamine cross-linker displayed greater protein adsorption on their surfaces.
Sortase-Mediated Ligation of Purely Artificial Building Blocks
Sortase A (SrtA) from Staphylococcus aureus has been often used for ligating a protein with other natural or synthetic compounds in recent years. Here we show that SrtA-mediated ligation (SML) is universally applicable for the linkage of two purely artificial building blocks. Silica nanoparticles (NPs), poly(ethylene glycol) and poly(N-isopropyl acrylamide) are chosen as synthetic building blocks. As a proof of concept, NP–polymer, NP–NP, and polymer–polymer structures are formed by SrtA catalysis. Therefore, the building blocks are equipped with the recognition sequence needed for SrtA reaction—the conserved peptide LPETG—and a pentaglycine motif. The successful formation of the reaction products is shown by means of transmission electron microscopy (TEM), matrix assisted laser desorption ionization-time of flight mass spectrometry (MALDI-ToF MS), and dynamic light scattering (DLS). The sortase catalyzed linkage of artificial building blocks sets the stage for the development of a new approach to link synthetic structures in cases where their synthesis by established chemical methods is complicated.
Approach to Obtain Electrospun Hydrophilic Fibers and Prevent Fiber Necking
Solution electrospinning of a blend containing a hydrophobic polymer with a hydrophilic functional polymer as an additive is a simple and straight-forward route to obtain functional and hydrophilic fibers accompanied by the mechanical properties of the hydrophobic polymer. However, this process of thermodynamically unfavored surface segregation of the hydrophilic additive is not well understood. To understand the process the dependencies of the surface hydrophilization on type of hydrophilic polymers, the solvent, and the process, using poly(caprolactone) (PCL) as the matrix polymer is explored. The results show that hydrophilic fibers can be obtained using different additive hydrophilic polymers. The combination of polymer blends which show this effect can be predicted using the Flory–Huggins interaction parameter. In addition mechanical and micromechanical properties of PCL fibers blended with NCO-terminated star-shaped poly(ethylene glycol) (sPEG-NCO) as additive are investigated. In this context blending with sPEG-NCO turns out to be a powerful tool to prevent fiber necking rendering this method an interesting candidate for tissue engineering application, where it is mandatory to retain the surface properties under mechanical stress.
Time-resolved structural evolution during the collapse of responsive hydrogels: The microgel-to-particle transition
Adaptive hydrogels, often termed smart materials, are macromolecules whose structure adjusts to external stimuli. Responsive micro- and nanogels are particularly interesting because the small length scale enables very fast response times. Chemical cross-links provide topological constraints and define the three-dimensional structure of the microgels, whereas their porous structure permits fast mass transfer, enabling very rapid structural adaption of the microgel to the environment. The change of microgel structure involves a unique transition from a flexible, swollen finite-size macromolecular network, characterized by a fuzzy surface, to a colloidal particle with homogeneous density and a sharp surface. In this contribution, we determine, for the first time, the structural evolution during the microgel-to-particle transition. Time-resolved small-angle x-ray scattering experiments and computer simulations unambiguously reveal a two-stage process: In a first, very fast process, collapsed clusters form at the periphery, leading to an intermediate, hollowish core-shell structure that slowly transforms to a globule. This structural evolution is independent of the type of stimulus and thus applies to instantaneous transitions as in a temperature jump or to slower stimuli that rely on the uptake of active molecules from and/or exchange with the environment. The fast transitions of size and shape provide unique opportunities for various applications as, for example, in uptake and release, catalysis, or sensing.
Physical gels of poly(vinylamine) by thermal curing
Physical gels are a versatile class of materials which can find application in sensors, electrochemistry, biomedicine or rheological modifiers. Herein, we present a hydrogen-bonded physical gel which is based on the interaction between phenylcarbonate telechelic poly(ethylene glycol) (PEG-PC) and poly(vinyl amine-co-acetamide) (p(VAm-co-VAA)). The critical gelation concentration was found to be 10 wt% by rheology and NMR. UV-vis spectroscopy and dynamic light scattering reveal the formation of aggregates in the gel. Rheology and differential scanning calorimetry (DSC) was used to show the effect of thermal curing on the mechanical properties of the physical gel. © The Royal Society of Chemistry 2020.
Novel Antibacterial Polyglycidols: Relationship between Structure and Properties
Antimicrobial polymers are an attractive alternative to low molecular weight biocides, because they are non-volatile, chemically stable, and can be used as non-releasing additives. Polymers with pendant quaternary ammonium groups and hydrophobic chains exhibit antimicrobial properties due to the electrostatic interaction between polymer and cell wall, and the membrane disruptive capabilities of the hydrophobic moiety. Herein, the synthesis of cationic–hydrophobic polyglycidols with varying structures by post-polymerization modification is presented. The antimicrobial properties of the prepared polyglycidols against E. coli and S. aureus are examined. Polyglycidol with statistically distributed cationic and hydrophobic groups (cationic–hydrophobic balance of 1:1) is compared to (i) polyglycidol with a hydrophilic modification at the cationic functionality; (ii) polyglycidol with both—cationic and hydrophobic groups—at every repeating unit; and (iii) polyglycidol with a cationic–hydrophobic balance of 1:2. A relationship between structure and properties is presented.