136 results
Search Results
Now showing 1 - 10 of 136
- ItemShallow shear-wave reflection seismics in the tsunami struck Krueng Aceh River Basin, Sumatra(Katlenburg-Lindau : European Geosciences Union, 2008) Polom, U.; Arsyad, I.; Kümpel, H.-J.As part of the project "Management of Georisk" (MANGEONAD) of the Federal Institute for Geosciences and Natural Resources (BGR), Hanover, high resolution shallow shear-wave reflection seismics was applied in the Indonesian province Nanggroe Aceh Darussalam, North Sumatra in cooperation with the Government of Indonesia, local counterparts, and the Leibniz Institute for Applied Geosciences, Hanover. The investigations were expected to support classification of earthquake site effects for the reconstruction of buildings and infrastructure as well as for groundwater exploration. The study focus sed on the city of Banda Aceh and the surroundings of Aceh Besar. The shear-wave seismic surveys were done parallel to standard geoengineering investigations like cone penetrometer tests to support subsequent site specific statistical calibration. They were also partly supplemented by shallow p-wave seismics for the identification of (a) elastic subsurface parameters and (b) zones with abundance of groundwater. Evaluation of seismic site effects based on shallow reflection seismics has in fact been found to be a highly useful method in Aceh province. In particular, use of a vibratory seismic source was essential for successful application of shear-wave seismics in the city of Banda Aceh and in areas with compacted ground like on farm tracks in the surroundings, presenting mostly agricultural land use areas. We thus were able to explore the mechanical stiffness of the subsurface down to 100 m depth, occasionally even deeper, with remarkably high resolution. The results were transferred into geotechnical site classification in terms of the International Building Code (IBC, 2003). The seismic images give also insights into the history of the basin sedimentation processes of the Krueng Aceh River delta, which is relevant for the exploration of new areas for construction of safe foundations of buildings and for identification of fresh water aquifers in the tsunami flooded region.
- ItemChronostratigraphy of silt-dominated Pleistocene periglacial slope deposits on Mt. Ślęża (SW, Poland): Palaeoenvironmental and pedogenic significance(New York, NY [u.a.] : Elsevier, 2020) Waroszewski, Jaroslaw; Sprafke, Tobias; Kabala, Cezary; Musztyfaga, Elżbieta; Kot, Aleksandra; Tsukamoto, Sumiko; Frechen, ManfredSlope deposits with aeolian silt admixture are a widespread parent material of soils in the temperate zone but may be neglected when rates of soil production are quantified. The concept of periglacial cover beds differentiates slope deposits with or without aeolian silt admixture; yet there is a remaining debate on processes and the timing of their formation. A previous study done by us at Mt. Ślęża, SW Poland, concluded that slope deposits with variable aeolian silt admixture, or its lack, have a significant influence on the pathway of soil formation. The present work builds upon this finding, by adding further granulometric and micromorphological data from three representative profiles along a toposequence, in order to refine our understanding of local slope deposits and soil formation. Additionally, seven numerical ages using luminescence dating provide a chronological framework for our reconstructions and allow linking the forming processes of these pedosedimentary records to regional palaeoenvironmental conditions. The oldest aeolian deposits are of Middle Pleistocene age (>280 ± 19 ka) with interlayered palaeosol (marine isotope stage [MIS] 9 or older). Late Pleistocene slope deposits encompass the maximum loess thickness and are dated to MIS 2. Luminescence ages from the upper layers indicate shallow reworking, which we tentatively correlate to the Younger Dryas (YD). Two profiles with thick loess mantles have strong clay illuviation features, presumably formed during the Holocene. However, weak clay illuviation in the third profile with a thin loess mantle (having an age of YD) over granite regolith seems to have occurred before the Holocene, as only fragmented clay coatings (probably MIS 2 pedogenesis) could be found. © 2020 The Authors
- ItemMultiproxy approach to the reconstruction of soil denudation events and the disappearance of Luvisols in the loess landscape of south-western Poland(Amsterdam : Elsevier, 2022) Loba, Aleksandra; Zhang, Junjie; Tsukamoto, Sumiko; Kasprzak, Marek; Beata Kowalska, Joanna; Frechen, Manfred; Waroszewski, JarosławLoess landscapes are highly susceptible to soil redeposition processes and thus may provide detailed insights into the record of denudation processes. Using optically stimulated luminescence dating and the soil micromorphology of 12 soil profiles, we reconstructed a complete record of denudation processes in south-western Poland. The first episode of soil redeposition took place around 9.1 ka. The denudation events that followed were attributed to the Neolithic (6.4 ± 0.3 ka), early Bronze Age (3.8 ± 0.2 ka), early and late Middle Ages (1.5 ± 0.1 ka and 0.7 ± 0.03 ka, respectively) and early Modern (0.4 ± 0.02 ka). As a consequence of the denudation processes, the soil cover in the studied area had been strongly reshaped. The predominant Luvisols had experienced progressive erosion processes that led first to a significant shallowing of the eluvial and argic horizons (truncated Luvisol) and, after some time, to their complete removal. Further thinning of the loess mantles had exposed geological substrates with very weak pedogenic alternations, thus pushing their transformation towards Regosol types. Similarly, Regosols occurred in toeslopes where freshly eroded material had been deposited, and where diagnostic horizons had not yet developed. Modern soil erosion rates in the studied loess area have considerably increased, and it is estimated that the Luvisol status may be completely transformed within approximately 80–300 years, if not sooner, due to progressive climate change.
- ItemOSL-dating of the Pleistocene-Holocene climatic transition in loess from China, Europe and North America, and evidence for accretionary pedogenesis(Amsterdam [u.a.] : Elsevier, 2021) Constantin, D.; Mason, J.A.; Veres, D.; Hambach, U.; Panaiotu, C.; Zeeden, C.; Zhou, L.; Marković, S.B.; Gerasimenko, N.; Avram, A.; Tecsa, V.; Groza-Sacaciu, S.M.; del Valle Villalonga, L.; Begy, R.; Timar-Gabor, A.Loess deposits intercalated by paleosols are detailed terrestrial archives of Quaternary climate variability providing information on the global dust cycle and landscape dynamics. Their paleoclimatic significance is often explored by quantifying their mineral magnetic properties due to their sensitivity to local/regional hydroclimate variability. Detailed chronological assessment of such regional proxy records around the climatic transitions allow a better understanding of how regional records react to major global climatic transitions such as the Pleistocene-Holocene climatic transition. Logs of high-resolution magnetic susceptibility and its frequency dependence were used as paleoclimatic proxies to define the environmental transition from the last glacial loess to the current interglacial soil as reflected in nine loess-paleosol sequences across the northern hemisphere, from the Chinese Loess Plateau, the southeastern European loess belt and the central Great Plains, USA. The onset of increase in magnetic susceptibility above typical loess values was used to assess the onset of, and developments during, the Pleistocene-Holocene climatic transition. High-resolution luminescence dating was applied on multiple grain-sizes (4–11 μm, 63–90 μm, 90–125 μm) of quartz extracts from the same sample in order to investigate the timing of Pleistocene-Holocene climatic transition in the investigated sites. The magnetic susceptibility signal shows a smooth and gradual increase for the majority of the sites from the typical low loess values to the interglacial ones. The initiation of this increase, interpreted as recording the initiation of the Pleistocene-Holocene climatic transition at each site, was dated to 14–17.5 ka or even earlier. Our chronological results highlight the need of combining paleoclimatic proxies (magnetic susceptibility) with absolute dating when investigating the Pleistocene-Holocene climatic transition as reflected by the evolution of this proxy in order to avoid chronostratigraphic misinterpretations in loess-paleosol records caused by simple pattern correlation. The detailed luminescence chronologies evidence the continuity of eolian mineral dust accumulation regardless of glacial or interglacial global climatic regimes. Coupled with magnetic susceptibility records this indicates that dust sedimentation and pedogenesis act simultaneously and result in a non-negligible accretional component in the formation of Holocene soils in loess regions across the Northern Hemisphere. The luminescence ages allowed the modeling of accumulation rates for the Holocene soil which are similar for European, Chinese and U.S.A. loess sites investigated and vary from 2 cm ka−1 to 9 cm ka−1. While accretional pedogenesis has often been implicitly or explicitly assumed in paleoclimatic interpretation of loess-paleosol sequences, especially in the Chinese Loess Plateau, our luminescence data add direct evidence for ongoing sedimentation as interglacial soils formed.
- ItemLoess landscapes of Europe – Mapping, geomorphology, and zonal differentiation(Amsterdam [u.a.] : Elsevier, 2021) Lehmkuhl, F.; Nett, J.J.; Pötter, S.; Schulte, P.; Sprafke, T.; Jary, Z.; Antoine, P.; Wacha, L.; Wolf, D.; Zerboni, A.; Hošek, J.; Marković, S.B.; Obreht, I.; Sümegi, P.; Veres, D.; Zeeden, C.; Boemke, B.; Schaubert, V.; Viehweger, J.; Hambach, U.Paleoenvironmental reconstructions on a (supra-)regional scale have gained attention in Quaternary sciences during the last decades. In terrestrial realms, loess deposits and especially intercalations of loess and buried soils, so called loess-paleosol sequences (LPS) are important archives to unravel the terrestrial response to e.g. climatic fluctuations and reconstruct paleoenvironments during the Pleistocene. The analysis of LPS requires the knowledge of several key factors, such as the distribution of the aeolian sediments, their location relative to (potential) source areas, the climate conditions that led to their emplacement and the topography of the sink area. These factors strongly influence the sedimentological and paleoenvironmental characteristics of LPS and show broad variations throughout Europe, leading to a distinct distribution pattern throughout the continent. We present a new map of the distribution of aeolian sediments (mainly loess) and major potential source areas for Europe. The map was compiled combining geodata of different mapping approaches. Most of the used geodata stems from accurate national maps of 27 different countries. Problematic aspects such as different nomenclatures across administrative borders were carefully investigated and revised. The result is a seamless map, which comprises pedological, geological, and geomorphological data and can be used for paleoenvironmental and archeological studies and other applications. We use the resulting map and data from key geomorphological cross-sections to discuss the various influences of geomorphology and paleoenvironment on the deposition and preservation of Late Pleistocene loess throughout Europe. We divided the loess areas into 6 main loess domains and 17 subdomains to understand and explain the factors controlling their distribution and characteristics. For the subdivision we used the following criteria: (1) influence of silt production areas, (2) affiliation to subcatchments, as rivers are very important regional silt transport agents, (3) occurrence of past periglacial activity with characteristic overprinting of the deposits. Additionally, the sediment distribution is combined with elevation data, to investigate the loess distribution statistically as well as visually. Throughout Europe, the variations, and differences of the loess domains are the results of a complex interplay of changing paleoenvironmental conditions and related geomorphologic processes, controlling dust sources, transport, accumulation, preservation, pedogenesis, alongside erosional and reworking events. Climatic, paleoclimatic, and pedoclimatic gradients are on the continental scale an additional important factor, since there are e.g. latitudinal differences of permafrost and periglacial processes, an increase in continentality from west to east and in aridity from northwest to southeast and south, strongly affecting regional sedimentary and geomorphic dynamics. We propose three main depositional regimes for loess formation in Europe: (1.) periglacial and tundra loess formation with periglacial processes and permafrost in the high latitude and mountainous regions; (2.) steppe and desert margin loess formation in the (semi-)arid regions; and (3.) loess and soil formation in temperate and subtropical regions. Loess deposits of (1.) and (2.) show coarser, sandier particle distributions towards the glacial and desert regions. In the humid areas (3.) forest vegetation limited dust production and accumulation, therefore, there is an increase in finer grain sizes due to an increase in weathering.
- ItemThe Cyclostratigraphy Intercomparison Project (CIP): consistency, merits and pitfalls(Amsterdam [u.a.] : Elsevier, 2019) Sinnesael, Matthias; De Vleeschouwer, David; Zeeden, Christian; Batenburg, Sietske J.; Da Silva, Anne-Christine; de Winter, Niels J.; Dinarès-Turell, Jaume; Drury, Anna Joy; Gambacorta, Gabriele; Hilgen, Frederik J.; Hinnov, Linda A.; Hudson, Alexander J.L.; Kemp, David B.; Lantink, Margriet L.; Laurin, Jiří; Li, Mingsong; Liebrand, Diederik; Ma, Chao; Meyers, Stephen R.; Monkenbusch, Johannes; Montanari, Alessandro; Nohl, Theresa; Pälike, Heiko; Pas, Damien; Ruhl, Micha; Thibault, Nicolas; Vahlenkamp, Maximilian; Valero, Luis; Wouters, Sébastien; Wu, Huaichun; Claeys, PhilippeCyclostratigraphy is an important tool for understanding astronomical climate forcing and reading geological time in sedimentary sequences, provided that an imprint of insolation variations caused by Earth’s orbital eccentricity, obliquity and/or precession is preserved (Milankovitch forcing). Numerous stratigraphic and paleoclimate studies have applied cyclostratigraphy, but the robustness of the methodology and its dependence on the investigator have not been systematically evaluated. We developed the Cyclostratigraphy Intercomparison Project (CIP) to assess the robustness of cyclostratigraphic methods using an experimental design of three artificial cyclostratigraphic case studies with known input parameters. Each case study is designed to address specific challenges that are relevant to cyclostratigraphy. Case 1 represents an offshore research vessel environment, as only a drill-core photo and the approximate position of a late Miocene stage boundary are available for analysis. In Case 2, the Pleistocene proxy record displays clear nonlinear cyclical patterns and the interpretation is complicated by the presence of a hiatus. Case 3 represents a Late Devonian proxy record with a low signal-to-noise ratio with no specific theoretical astronomical solution available for this age. Each case was analyzed by a test group of 17-20 participants, with varying experience levels, methodological preferences and dedicated analysis time. During the CIP 2018 meeting in Brussels, Belgium, the ensuing analyses and discussion demonstrated that most participants did not arrive at a perfect solution, which may be partly explained by the limited amount of time spent on the exercises (∼4.5 hours per case). However, in all three cases, the median solution of all submitted analyses accurately approached the correct result and several participants obtained the exact correct answers. Interestingly, systematically better performances were obtained for cases that represented the data type and stratigraphic age that were closest to the individual participants’ experience. This experiment demonstrates that cyclostratigraphy is a powerful tool for deciphering time in sedimentary successions and, importantly, that it is a trainable skill. Finally, we emphasize the importance of an integrated stratigraphic approach and provide flexible guidelines on what good practices in cyclostratigraphy should include. Our case studies provide valuable insight into current common practices in cyclostratigraphy, their potential merits and pitfalls. Our work does not provide a quantitative measure of reliability and uncertainty of cyclostratigraphy, but rather constitutes a starting point for further discussions on how to move the maturing field of cyclostratigraphy forward.
- ItemLate Pleistocene paleosol formation in a dynamic aggradational microenvironment - A case study from the Malá nad Hronom loess succession (Slovakia)(New York, NY [u.a.] : Elsevier, 2021) Bradák, B.; Csonka, D.; Novothny, Á.; Szeberényi, J.; Medveďová, A.; Rostinsky, P.; Fehér, K.; Barta, G.; Végh, T.; Kiss, K.; Megyeri, M.The geomorphological characteristics of the loess succession at Malá nad Hronom (Slovakia) mean that it provides a valuable opportunity for the investigation of differences in soil formation in various topographic positions. Along with the semiquantitative characterization of the paleosols (on the basis of physical properties, texture, the characteristics of peds, clay films, horizon boundaries), high-resolution field magnetic susceptibility measurements and sampling were carried out along four different sections of the profile. Samples for luminescence dating were also taken, in order to establish the chronostratigraphical position of the paleosols studied. The comparison of various proxies revealed the differences in soil formation in a dynamic aggradational microenvironment for the same paleosol horizons located in various positions along the slope. Contrary to expectation, paleosols developed in local top or slope topographical positions did not display significant differences in e.g. in their degree of development, nor the characteristics of their magnetic susceptibility curves. In the case of paleosols in positions lower down the slope, signs of quasi-permanent sediment input could be recognized as being present as early as during the formation of the soil itself. This sediment input would seem to be surpassed in the case of pedogenesis strengthened by the climate of the last interglacial (marine isotope stage - MIS 5). Pedogenesis seems to be sustained by renewed intense dust accumulation in the Late Pleistocene, in MIS 3, though compared to MIS 5, the climate of MIS 3 did not favor intense pedogenesis. Despite the general belief that loess series formed in plateau positions can preserve terrestrial records without significant erosion, in the case of the Malá nad Hronom loess this is not so. Compared to the sequence affected by erosional events in the local top position, the sequence affected by quasi-continuous sediment input in the lower slope position seems to have preserved the soil horizons intact. © 2020 The Author(s)
- ItemProvenance and paleoenvironmental context of the Late Pleistocene thin aeolian silt mantles in southwestern Poland – A widespread parent material for soils(New York, NY [u.a.] : Elsevier, 2021) Waroszewski, Jaroslaw; Pietranik, Anna; Sprafke, Tobias; Kabała, Cezary; Frechen, Manfred; Jary, Zdzisław; Kot, Aleksandra; Tsukamoto, Sumiko; Meyer-Heintze, Simon; Krawczyk, Marcin; Łabaz, Beata; Schultz, Bernhard; Erban Kochergina, Yulia V.Thin loess deposits are widespread soil parent materials and important archives for paleoenvironmental reconstruction. The origin of loess in SW Poland is attributed to the Great Odra Valley (GOV), following the general concept that large rivers play a major role in regional silt supply. Yet, the precise provenance (glacier sources and/or local rocks) of silts, possibly deflated from dry GOV braided riverbeds, is not clear. Our study of thin and thick loess mantles in SW Poland for the first time indicates the provenance of thin loess based on mineralogical (MLA-SEM) and isotopic analyses (143Nd/144Nd, 87Sr/86Sr). Luminescence ages of five localities point to thin loess mantle formation during and shortly (23.0 to 17.7 ka yr) after the Last Glacial Maximum (LGM). Our isotopic data indicate that thin loess deposits in SW Poland are the mixtures of two main components – local Sudetic and Scandinavian, the latter delivered by the Fennoscandian ice sheet (FIS). Also, detailed analyses of heavy minerals show that a single mineral (e.g., hornblende) may come from both Sudetic and Scandinavian sources. This research highlights the role of the (Pleistocene) GOV in collecting and homogenizing materials, while supplying the region with fine particles to be deflated by paleowinds from open surfaces. Anomalies in mineralogy and isotopic composition are connected with influence of Sudetic mountain rivers and locally blowing silt material by katabatic winds. Regional grain size differentiation of thin loess mantles explains transport distance and altitude. © 2021 The Authors
- ItemA post-IR IRSL chronology and dust mass accumulation rates of the Nosak loess-palaeosol sequence in northeastern Serbia(Oxford [u.a.] : Wiley-Blackwell, 2020) Perić, Zoran M.; Marković, Slobodan B.; Sipos, György; Gavrilov, Milivoj B.; Thiel, Christine; Zeeden, Christian; Murray, Andrew S.In the Middle Danube Basin, Quaternary deposits are widely distributed in the Vojvodina region where they cover about 95% of the area. Major research during the last two decades has been focused on loess deposits in the Vojvodina region. During this period, loess in the Vojvodina region has become one of the most important Pleistocene European continental climatic and environmental records. Here we present the dating results of 15 samples taken from the Nosak loess-palaeosol sequence in northeastern Serbia in order to establish a chronology over the last three glacial–interglacial cycles. We use the pIRIR290 signal of the 4–11 μm polymineral grains. The calculated ages are within the error limits partially consistent with the proposed multi-millennial chronostratigraphy for Serbian loess. The average mass accumulation rate for the last three glacial–interglacial cycles is 265 g m−2 a−1, which is in agreement with the values of most sites in the Carpathian Basin. Our results indicate a highly variable deposition rate of loess, especially during the MIS 3 and MIS 6 stages, which is contrary to most studies conducted in Serbia where linear sedimentation rates were assumed. © 2020 The Authors. Boreas published by John Wiley & Sons Ltd on behalf of The Boreas Collegium
- ItemIce-marginal forced regressive deltas in glacial lake basins: geomorphology, facies variability and large-scale depositional architecture(Oxford [u.a.] : Wiley-Blackwell, 2018) Winsemann, Jutta; Lang, Jörg; Polom, Ulrich; Loewer, Markus; Igel, Jan; Pollok, Lukas; Brandes, ChristianThis study presents a synthesis of the geomorphology, facies variability and depositional architecture of ice-marginal deltas affected by rapid lake-level change. The integration of digital elevation models, outcrop, borehole, ground-penetrating radar and high-resolution shear-wave seismic data allows for a comprehensive analysis of these delta systems and provides information about the distinct types of deltaic facies and geometries generated under different lake-level trends. The exposed delta sediments record mainly the phase of maximum lake level and subsequent lake drainage. The stair-stepped profiles of the delta systems reflect the progressive basinward lobe deposition during forced regression when the lakes successively drained. Depending on the rate and magnitude of lake-level fall, fan-shaped, lobate or more digitate tongue-like delta morphologies developed. Deposits of the stair-stepped transgressive delta bodies are buried, downlapped and onlapped by the younger forced regressive deposits. The delta styles comprise both Gilbert-type deltas and shoal-water deltas. The sedimentary facies of the steep Gilbert-type delta foresets include a wide range of gravity-flow deposits. Delta deposits of the forced-regressive phase are commonly dominated by coarse-grained debrisflow deposits, indicating strong upslope erosion and cannibalization of older delta deposits. Deposits of supercritical turbidity currents are particularly common in sand-rich Gilbert-type deltas that formed during slow rises in lake level and during highstands. Foreset beds consist typically of laterally and vertically stacked deposits of antidunes and cyclic steps. The trigger mechanisms for these supercritical turbidity currents were both hyperpycnal meltwater flows and slope-failure events. Shoal-water deltas formed at low water depths during both low rates of lake-level rise and forced regression. Deposition occurred from tractional flows. Transgressive mouthbars form laterally extensive sand-rich delta bodies with a digitate, multi-tongue morphology. In contrast, forced regressive gravelly shoal-water deltas show a high dispersion of flow directions and form laterally overlapping delta lobes. Deformation structures in the forced-regressive ice-marginal deltas are mainly extensional features, including normal faults, small graben or half-graben structures and shear-deformation bands, which are related to gravitational delta tectonics, postglacial faulting during glacial-isostatic adjustment, and crestal collapse above salt domes. A neotectonic component cannot be ruled out in some cases. © 2018 The Authors. Boreas published by John Wiley & Sons Ltd on behalf of The Boreas Collegium