Search Results

Now showing 1 - 9 of 9
  • Item
    Functional relationship of particulate matter (PM) emissions, animal species, and moisture content during manure application
    (Amsterdam [u.a.] : Elsevier Science, 2020) Kabelitz, Tina; Ammon, Christian; Funk, Roger; Münch, Steffen; Biniasch, Oliver; Nübel, Ulrich; Thiel, Nadine; Rösler, Uwe; Siller, Paul; Amon, Barbara; Aarnink, André J.A.; Amon, Thomas
    Livestock manure is recycled to agricultural land as organic fertilizer. Due to the extensive usage of antibiotics in conventional animal farming, antibiotic-resistant bacteria are highly prevalent in feces and manure. The spread of wind-driven particulate matter (PM) with potentially associated harmful bacteria through manure application may pose a threat to environmental and human health. We studied whether PM was aerosolized during the application of solid and dried livestock manure and the functional relationship between PM release, manure dry matter content (DM), treatment and animal species. In parallel, manure and resulting PM were investigated for the survival of pathogenic and antibiotic-resistant bacterial species. The results showed that from manure with a higher DM smaller particles were generated and more PM was emitted. A positive correlation between manure DM and PM aerosolization rate was observed. There was a species-dependent critical dryness level (poultry: 60% DM, pig: 80% DM) where manure began to release PM into the environment. The maximum PM emission potentials were 1 and 3 kg t−1 of applied poultry and pig manure, respectively. Dried manure and resulting PM contained strongly reduced amounts of investigated pathogenic and antibiotic-resistant microorganisms compared to fresh samples. An optimal manure DM regarding low PM emissions and reduced pathogen viability was defined from our results, which was 55–70% DM for poultry manure and 75–85% DM for pig manure. The novel findings of this study increase our detailed understanding and basic knowledge on manure PM emissions and enable optimization of manure management, aiming a manure DM that reduces PM emissions and pathogenic release into the environment.
  • Item
    New Low-Melting Triply Charged Homoleptic Cr(III)-Based Ionic Liquids in Comparison to Their Singly Charged Heteroleptic Analogues
    (Basel : MDPI AG, 2021) Peppel, Tim; Köckerling, Martin
    A series of new low-melting triply charged homoleptic Cr(III)-based ionic liquids of the general formula (RMIm)3[Cr(NCS)6] (R = methyl, ethyl, n-butyl, benzyl) is reported. Their syntheses and properties are described in comparison to their singly charged heteroleptic analogues of the general formula (RMIm)[Cr(NCS)4L2] (R = methyl, ethyl, n-butyl, benzyl; L = pyridine, γ-picoline). In total, sixteen new Reineckate related salts with large imidazolium cations are described. Out of these, five compounds were crystallized, and their structures determined by single-crystal X-ray structure analyses. They all consisted of discrete anions and cations with octahedrally coordinated Cr(III) ions. In the structures, various hydrogen contacts interconnect the entities to build up hydrogen bonded networks. Thermal investigations showed relatively low melting points for the homoleptic complexes. The compounds with the [Cr(NCS)6]3− anion melt without decomposition and are stable up to 200 K above their melting points. The complex salts with the [Cr(NCS)4L2]− anion, in contrast, start to decompose and lose L molecules (Pyr or Pic) already at the melting point.
  • Item
    New methodology to process shifted excitation Raman difference spectroscopy data : a case study of pollen classification
    ([London] : Macmillan Publishers Limited, 2020) Korinth, F.; Mondol, A.S.; Stiebing, C.; Schie, I.W.; Krafft, C.; Popp, J.
    Shifted excitation Raman difference spectroscopy (SERDS) is a background correction method for Raman spectroscopy. Here, the difference spectra were directly used as input for SERDS-based classification after an optimization procedure to correct for photobleaching of the autofluorescence. Further processing included a principal component analysis to compensate for the reduced signal to noise ratio of the difference spectra and subsequent classification by linear discriminant analysis. As a case study 6,028 Raman spectra of single pollen originating from plants of eight different genera and four different growth habits were automatically recorded at excitation wavelengths 784 and 786 nm using a high-throughput screening Raman system. Different pollen were distinguished according to their growth habit, i.e. tree versus non-tree with an accuracy of 95.9%. Furthermore, all pollen were separated according to their genus, providing also insight into similarities based on their families. Classification results were compared using spectra reconstructed from the differences and raw spectra after state-of-art baseline correction as input. Similar sensitivities, specificities, accuracies and precisions were found for all spectra with moderately background. Advantages of SERDS are expected in scenarios where Raman spectra are affected by variations due to detector etaloning, ambient light, and high background.
  • Item
    Advanced thermal stability investigations of the Mn–Al-Ga system
    (Amsterdam [u.a.] : Elsevier, 2020) Mix, T.; Woodcock, T.G.
    A ternary Mn–Al-Ga alloy with the nominal composition Mn55Al38.57Ga6.43 was produced by arc melting. After homogenisation, the alloy consisted of the ε and γ2 phases. Appropriate heat treatments were used to transform each of these into a phase with the L10 structure. These two L10 phases had different compositions, lattice parameters and magnetic properties. In order to test the stability of the L10 phases against decomposition, heat treatments were carried out at 700 ​°C for durations of up to 14 days. The results showed that the decomposition started with formation of the β-Mn phase and subsequent appearance of the γ2 phase. The resulting diffusion gradients resulted in composition changes in the L10 phases and after 7 days, only a single, intermediate composition remained. After 14 days, the decomposition was almost complete. The decomposition of the L10 phases in the ternary Mn–Al-Ga alloy was significantly slower than in binary Mn–Al alloys.
  • Item
    Airflow Characteristics Downwind a Naturally Ventilated Pig Building with a Roofed Outdoor Exercise Yard and Implications on Pollutant Distribution
    (Basel : MDPI AG, 2020) Yi, Qianying; Janke, David; Thormann, Lars; Zhang, Guoqiang; Amon, Barbara; Hempel, Sabrina; Nosek, Štěpán; Hartung, Eberhard; Amon, Thomas
    The application of naturally ventilated pig buildings (NVPBs) with outdoor exercise yards is on the rise mainly due to animal welfare considerations, while the issue of emissions from the buildings to the surrounding environment is important. Since air pollutants are mainly transported by airflow, the knowledge on the airflow characteristics downwind the building is required. The objective of this research was to investigate airflow properties downwind of a NVPB with a roofed outdoor exercise yard for roof slopes of 5°, 15°, and 25°. Air velocities downwind a 1:50 scaled NVPB model were measured using a Laser Doppler Anemometer in a large boundary layer wind tunnel. A region with reduced mean air velocities was found along the downwind side of the building with a distance up to 0.5 m (i.e., 3.8 times building height), in which the emission concentration might be high. Additional air pollutant treatment technologies applied in this region might contribute to emission mitigation effectively. Furthermore, a wake zone with air recirculation was observed in this area. A smaller roof slope (i.e., 5° slope) resulted in a higher and shorter wake zone and thus a shorter air pollutant dispersion distance.
  • Item
    Curcumin and Graphene Oxide Incorporated into Alginate Hydrogels as Versatile Devices for the Local Treatment of Squamous Cell Carcinoma
    (Basel : MDPI, 2022) Madeo, Lorenzo Francesco; Sarogni, Patrizia; Cirillo, Giuseppe; Vittorio, Orazio; Voliani, Valerio; Curcio, Manuela; Shai-Hee, Tyler; Büchner, Bernd; Mertig, Michael; Hampel, Silke
    With the aim of preparing hybrid hydrogels suitable for use as patches for the local treatment of squamous cell carcinoma (SCC)-affected areas, curcumin (CUR) was loaded onto graphene oxide (GO) nanosheets, which were then blended into an alginate hydrogel that was crosslinked by means of calcium ions. The homogeneous incorporation of GO within the polymer network, which was confirmed through morphological investigations, improved the stability of the hybrid system compared to blank hydrogels. The weight loss in the 100–170 °C temperature range was reduced from 30% to 20%, and the degradation of alginate chains shifted to higher temperatures. Moreover, GO enhanced the stability in water media by counteracting the de-crosslinking process of the polymer network. Cell viability assays showed that the loading of CUR (2.5% and 5% by weight) was able to reduce the intrinsic toxicity of GO towards healthy cells, while higher amounts were ineffective due to the antioxidant/prooxidant paradox. Interestingly, the CUR-loaded systems were found to possess a strong cytotoxic effect in SCC cancer cells, and the sustained CUR release (~50% after 96 h) allowed long-term anticancer efficiency to be hypothesized.
  • Item
    Pollution Characteristics of Particulate Matter (PM2.5 and PM10) and Constituent Carbonaceous Aerosols in a South Asian Future Megacity
    (Basel : MDPI, 2020) Aslam, Afifa; Ibrahim, Muhammad; Shahid, Imran; Mahmood, Abid; Irshad, Muhammad Kashif; Yamin, Muhammad; Ghazala; Tariq, Muhammad; Shamshiri, Redmond R.
    The future megacity of Faisalabad is of prime interest when considering environmental health because of its bulky population and abundant industrial and anthropogenic sources of coarse particles (PM10) and fine airborne particulate matter (PM2.5). The current study was aimed to investigate the concentration level of PM2.5 and PM10, also the characterization of carbonaceous aerosols including organic carbon (OC), elemental carbon (EC) and total carbon (TC) in PM2.5 and PM10 samples collected from five different sectors (residential, health, commercial, industrial, and vehicular zone). The data presented here are the first of their kind in this sprawling city having industries and agricultural activities side by side. Results of the study revealed that the mass concentration of PM2.5 and PM10 is at an elevated level throughout Faisalabad, with ambient PM2.5 and PM10 points that constantly exceeded the 24-h standards of US-EPA, and National Environment Quality Standards (NEQS) which poses harmful effects on the quality of air and health. The total carbon concentration varied between 21.33 and 206.84 μg/m3, and 26.08 and 211.15 μg/m3 with an average of 119.16 ± 64.91 μg/m3 and 124.71 ± 64.38 μg/m3 for PM2.5 in summer and winter seasons, respectively. For PM10, the concentration of TC varied from 34.52 to 289.21 μg/m3 with an average of 181.50 ± 87.38 μg/m3 (for summer season) and it ranged between 44.04 and 300.02 μg/m3 with an average of 191.04 ± 87.98 μg/m3 (winter season), respectively. No significant difference between particulate concentration and weather parameters was observed. Similarly, results of air quality index (AQI) and pollution index (PI) stated that the air quality of Faisalabad ranges from poor to severely pollute. In terms of AQI, moderate pollution was recorded on sampling sites in the following order; Ittehad Welfare Dispensary > Saleemi Chowk > Kashmir Road > Pepsi Factory, while at Nazria Pakistan Square and Allied Hospital, higher AQI values were recorded. The analysis and results presented in this study can be used by policy-makers to apply rigorous strategies that decrease air pollution and the associated health effects in Faisalabad.
  • Item
    Versatile high power pulse-laser source for pico- and nanosecond optical pulses
    (London : Institute of Physics, 2020) Liero, Armin; Klehr, Andreas; Knigge, Andrea; Heinrich, Wolfgang
    This paper presents a pulse-laser source for the generation of ps and ns laser pulses with more than 50 W peak output power. The final stages of the drivers use GaN transistors and are capable of switching currents of 0.8 A with 200 ps minimum pulse width and 50 A with 3 ns minimum pulse width. The pulses can be externally triggered by ECL logic. Both single-pulse and pulse train modes are possible.
  • Item
    Comprehensive Assessment of the Dynamics of Banana Chilling Injury by Advanced Optical Techniques
    (Basel : MDPI, 2021) Herppich, Werner B.; Zsom, Tamás
    Green‐ripe banana fruit are sensitive to chilling injury (CI) and, thus, prone to postharvest quality losses. Early detection of CI facilitates quality maintenance and extends shelf life. CI affects all metabolic levels, with membranes and, consequently, photosynthesis being primary targets. Optical techniques such as chlorophyll a fluorescence analysis (CFA) and spectroscopy are promising tools to evaluate CI effects in photosynthetically active produce. Results obtained on bananas are, however, largely equivocal. This results from the lack of a rigorous evaluation of chilling impacts on the various aspects of photosynthesis. Continuous and modulated CFA and imaging (CFI), and VIS remission spectroscopy (VRS) were concomitantly applied to noninvasively and comprehensively monitor photosynthetically relevant effects of low temperatures (5 °C, 10 °C, 11.5 °C and 13 °C). Detailed analyses of chilling‐related variations in photosynthetic activity and photoprotection, and in contents of relevant pigments in green‐ripe bananas, helped to better understand the physiological changes occurring during CI, highlighting that distinct CFA and VRS parameters comprehensively reflect various effects of chilling on fruit photosynthesis. They revealed why not all CFA parameters can be applied meaningfully for early detection of chilling effects. This study provides relevant requisites for improving CI monitoring and prediction.