6 results
Search Results
Now showing 1 - 6 of 6
- ItemFree-standing Fe2O3 nanomembranes enabling ultra-long cycling life and high rate capability for Li-ion batteries(London : Nature Publishing Group, 2014) Liu, X.; Si, W.; Zhang, J.; Sun, X.; Deng, J.; Baunack, S.; Oswald, S.; Liu, L.; Yan, C.; Schmidt, O.G.With Fe2O3 as a proof-of-concept, free-standing nanomembrane structure is demonstrated to be highly advantageous to improve the performance of Li-ion batteries. The Fe2O3 nanomembrane electrodes exhibit ultra-long cycling life at high current rates with satisfactory capacity (808 mAh g-1 after 1000 cycles at 2 C and 530 mAh g-1 after 3000 cycles at 6 C) as well as repeatable high rate capability up to 50 C. The excellent performance benefits particularly from the unique structural advantages of the nanomembranes. The mechanical feature can buffer the strain of lithiation/delithiation to postpone the pulverization. The two-dimensional transport pathways in between the nanomembranes can promote the pseudo-capacitive type storage. The parallel-laid nanomembranes, which are coated by polymeric gel-like film and SEI layer with the electrolyte in between layers, electrochemically behave like numerous "mini-capacitors" to provide the pseudo-capacitance thus maintain the capacity at high rate.
- ItemWavelength-versatile graphene-gold film saturable absorber mirror for ultra-broadband mode-locking of bulk lasers(London : Nature Publishing Group, 2014) Ma, J.; Xie, G.; Lv, P.; Gao, W.; Yuan, P.; Qian, L.; Griebner, U.; Petrov, V.; Yu, H.; Zhang, H.; Wang, J.An ultra-broadband graphene-gold film saturable absorber mirror (GG-SAM) with a spectral coverage exceeding 1300 nm is experimentally demonstrated for mode-locking of bulk solid-state lasers. Owing to the p-type doping effect caused by graphene-gold film interaction, the graphene on gold-film substrate shows a remarkably lower light absorption relative to pristine graphene, which is very helpful to achieve continuous-wave mode-locking in low-gain bulk lasers. Using the GG-SAM sample, stable mode-locking is realized in a Yb:YCOB bulk laser near 1 μm, a Tm:CLNGG bulk laser near 2 μm and a Cr:ZnSe bulk laser near 2.4 μm. The saturable absorption is characterised at an intermediate wavelength of 1.56 μm by pump-probe measurements. The as-fabricated GG-SAM with ultra-broad bandwidth, ultrafast recovery time, low absorption, and low cost has great potential as a universal saturable absorber mirror for mode-locking of various bulk lasers with unprecedented spectral coverage.
- ItemPlasmon-driven sequential chemical reactions in an aqueous environment(London : Nature Publishing Group, 2014) Zhang, X.; Wang, P.; Zhang, Z.; Fang, Y.; Sun, M.Plasmon-driven sequential chemical reactions were successfully realized in an aqueous environment. In an electrochemical environment, sequential chemical reactions were driven by an applied potential and laser irradiation. Furthermore, the rate of the chemical reaction was controlled via pH, which provides indirect evidence that the hot electrons generated from plasmon decay play an important role in plasmon-driven chemical reactions. In acidic conditions, the hot electrons were captured by the abundant H + in the aqueous environment, which prevented the chemical reaction. The developed plasmon-driven chemical reactions in an aqueous environment will significantly expand the applications of plasmon chemistry and may provide a promising avenue for green chemistry using plasmon catalysis in aqueous environments under irradiation by sunlight.
- ItemPlasmon-driven dimerization via S-S chemical bond in an aqueous environment(London : Nature Publishing Group, 2014) Cui, L.; Wang, P.; Chen, X.; Fang, Y.; Zhang, Z.; Sun, M.The surface-enhanced Raman scattering (SERS) spectra of thioanisole are experimentally investigated in an electrochemical environment in this study. Two Raman peaks, which depend strongly not only on electric potential but also on the local surface plasmon resonances (LSPR), have been observed. Theoretical calculations reveal that thioanisole is first dissociated from thiophenol via the S-CH3 bond; plasmons then drive the dimerisation of thiophenol via the S-S bond, which is strongly potential dependent. One Raman peak corresponds to the S-S vibrational mode of the thiophenol dimer, and the other corresponds to the asymmetric C-C stretching modes of the benzenyl of the thiophenol dimer. The potential-dependent two Raman modes is the potential-dependent dimerisation dynamics of thiophenol via the S-S bond. Our experimental findings provide insight into the structural elucidation of adsorbed molecules and molecular surface reaction dynamics.
- ItemUltrafast high-resolution mass spectrometric finger pore imaging in latent finger prints(London : Nature Publishing Group, 2014) Elsner, C.; Abel, B.Latent finger prints (LFPs) are deposits of sweat components in ridge and groove patterns, left after human fingers contact with a surface. Being important targets in biometry and forensic investigations they contain more information than topological patterns. With laser desorption mass spectrometry imaging (LD-MSI) we record 'three-dimensional' finger prints with additional chemical information as the third dimension. Here we show the potential of fast finger pore imaging (FPI) in latent finger prints employing LD-MSI without a classical matrix in a high-spatial resolution mode. Thin films of gold rapidly sputtered on top of the sample are used for desorption. FPI employing an optical image for rapid spatial orientation and guiding of the desorption laser enables the rapid analysis of individual finger pores, and the chemical composition of their excretions. With this approach we rapidly detect metabolites, drugs, and characteristic excretions from the inside of the human organism by a minimally-invasive strategy, and distinguish them from chemicals in contact with fingers without any labeling. The fast finger pore imaging, analysis, and screening approach opens the door for a vast number of novel applications in such different fields as forensics, doping and medication control, therapy, as well as rapid profiling of individuals.
- ItemOptical breathing of nano-porous antireflective coatings through adsorption and desorption of water(London : Nature Publishing Group, 2014) Nielsen, K.H.; Kittel, T.; Wondraczek, K.; Wondraczek, L.We report on the direct consequences of reversible water adsorption on the optical performance of silica-based nanoporous antireflective (AR) coatings as they are applied on glass in photovoltaic and solar thermal energy conversion systems. In situ UV-VIS transmission spectroscopy and path length measurements through high-resolution interferometric microscopy were conducted on model films during exposure to different levels of humidity and temperature. We show that water adsorption in the pores of the film results in a notable increase of the effective refractive index of the coating. As a consequence, the AR effect is strongly reduced. The temperature regime in which the major part of the water can be driven-out rapidly lies in the range of 55°C and 135°C. Such thermal desorption was found to increase the overall transmission of a coated glass by ∼ 1%-point. As the activation energy of isothermal desorption, we find a value of about 18 kJ/mol. Within the experimental range of our data, the sorption and desorption process is fully reversible, resulting in optical breathing of the film. Nanoporous AR films with closed pore structure or high hydrophobicity may be of advantage for maintaining AR performance under air exposure.