19 results
Search Results
Now showing 1 - 10 of 19
- ItemControlling Optical and Catalytic Activity of Genetically Engineered Proteins by Ultrasound(Weinheim : Wiley-VCH, 2021) Zhou, Yu; Huo, Shuaidong; Loznik, Mark; Göstl, Robert; Boersma, Arnold J.; Herrmann, AndreasUltrasound (US) produces cavitation-induced mechanical forces stretching and breaking polymer chains in solution. This type of polymer mechanochemistry is widely used for synthetic polymers, but not biomacromolecules, even though US is biocompatible and commonly used for medical therapy as well as in vivo imaging. The ability to control protein activity by US would thus be a major stepping-stone for these disciplines. Here, we provide the first examples of selective protein activation and deactivation by means of US. Using GFP as a model system, we engineer US sensitivity into proteins by design. The incorporation of long and highly charged domains enables the efficient transfer of force to the protein structure. We then use this principle to activate the catalytic activity of trypsin by inducing the release of its inhibitor. We expect that this concept to switch “on” and “off” protein activity by US will serve as a blueprint to remotely control other bioactive molecules. © 2020 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH
- ItemMulticolor Mechanofluorophores for the Quantitative Detection of Covalent Bond Scission in Polymers(Weinheim : Wiley-VCH, 2021) Baumann, Christoph; Stratigaki, Maria; Centeno, Silvia P.; Göstl, RobertThe fracture of polymer materials is a multiscale process starting with the scission of a single molecular bond advancing to a site of failure within the bulk. Quantifying the bonds broken during this process remains a big challenge yet would help to understand the distribution and dissipation of macroscopic mechanical energy. We here show the design and synthesis of fluorogenic molecular optical force probes (mechanofluorophores) covering the entire visible spectrum in both absorption and emission. Their dual fluorescent character allows to track non-broken and broken bonds in dissolved and bulk polymers by fluorescence spectroscopy and microscopy. Importantly, we develop an approach to determine the absolute number and relative fraction of intact and cleaved bonds with high local resolution. We anticipate that our mechanofluorophores in combination with our quantification methodology will allow to quantitatively describe fracture processes in materials ranging from soft hydrogels to high-performance polymers. © 2021 The Authors. Angewandte Chemie International Edition published by Wiley-VCH GmbH
- ItemMethods for Exerting and Sensing Force in Polymer Materials Using Mechanophores(Weinheim : Wiley-VCH, 2020) Stratigaki, Maria; Göstl, RobertIn recent years, polymer mechanochemistry has evolved as a methodology to provide insights into the action-reaction relationships of polymers and polymer-based materials and composites in terms of macroscopic force application (stress) and subsequent deformation (strain) through a mechanophore-assisted coupling of mechanical and chemical phenomena. The perplexity of the process, however, from the viewpoint of mechanophore activation via a molecular-scaled disruption of the structure that yields a macroscopically detectable optical signal, renders this otherwise rapidly evolving field challenging. Motivated by this, we highlight here recent advancements of polymer mechanochemistry with particular focus on the establishment of methodologies for the efficient activation and quantification of mechanophores and anticipate to aptly pinpoint unresolved matters and limitations of the respective approaches, thus highlighting possible developments. © 2020 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.
- ItemDetecting Bacteria on Wounds with Hyperspectral Imaging in Fluorescence Mode(Berlin : De Gruyter, 2020) Hornberger, Christoph.; Herrmann, Bert. H.; Daeschlein, Georg; Podewils, Sebastian von; Sicher, Claudia; Kuhn, Jana; Masur, Kai; Meister, Mareike; Wahl, PhilipChronic non-healing wounds represent an increasing problem. In order to enable physicians and nurses to make evidence based decisions on wound treatment, the professional societies call for supporting tools to be offered to physicians. Oxygen supply, bacteria colonization and other parameters influence the healing process. So far, these parameters cannot be monitored in an objective and routinely manner. Existing methods like the microbiological analysis of wound swabs, mean a great deal of effort and partly a long delay. In this paper 42 fluorescence images from 42 patients with diabetic foot ulcer, recorded with a hyperspectral imaging system (TIVITA®), converted for fluorescence imaging, were analysed. Beside the fluorescence images, information about the bacterial colonization is available from microbiological analysis of wound swabs. After preprocessing, principal component analysis, PCA, is used for data analysis with a 405 nm excitation wavelength, the emission wavelength range 510 - 745 nm is used for analysis. After dividing the data into a training and a test dataset it could be shown, that bacteria are detectable in the wound area. A quantification in bacterial colonization counts (BCC) was not in the focus of the research in this study stage.
- ItemSinglet-Oxygen Generation by Peroxidases and Peroxygenases for Chemoenzymatic Synthesis(Weinheim : Wiley-VCH, 2020) Ingenbosch, Kim N.; Quint, Stephan; Dyllick-Brenzinger, Melanie; Wunschik, Dennis S.; Kiebist, Jan; Süss, Philipp; Liebelt, Ute; Zuhse, Ralf; Menyes, Ulf; Scheibner, Katrin; Mayer, Christian; Opwis, Klaus; Gutmann, Jochen S.; Hoffmann-Jacobsen, KerstinSinglet oxygen is a reactive oxygen species undesired in living cells but a rare and valuable reagent in chemical synthesis. We present a fluorescence spectroscopic analysis of the singlet-oxygen formation activity of commercial peroxidases and novel peroxygenases. Singlet-oxygen sensor green (SOSG) is used as fluorogenic singlet oxygen trap. Establishing a kinetic model for the reaction cascade to the fluorescent SOSG endoperoxide permits a kinetic analysis of enzymatic singlet-oxygen formation. All peroxidases and peroxygenases show singlet-oxygen formation. No singlet oxygen activity could be found for any catalase under investigation. Substrate inhibition is observed for all reactive enzymes. The commercial dye-decolorizing peroxidase industrially used for dairy bleaching shows the highest singlet-oxygen activity and the lowest inhibition. This enzyme was immobilized on a textile carrier and successfully applied for a chemical synthesis. Here, ascaridole was synthesized via enzymatically produced singlet oxygen. © 2020 Wiley-VCH GmbH
- ItemCurcuminoid–BF2 complexes: Synthesis, fluorescence and optimization of BF2 group cleavage(Frankfurt a.M. : Beilstein-Institut, 2017) Weiß, Henning; Reichel, Jeannine; Görls, Helmar; Schneider, Kilian R.A.; Micheel, Mathias; Pröhl, Michael; Gottschaldt, Michael; Dietzek, Benjamin; Weigand, WolfgangEight difluoroboron complexes of curcumin derivatives carrying alkyne groups containing substituents have been synthesized following an optimised reaction pathway. The complexes were received in yields up to 98% and high purities. Their properties as fluorescent dyes have been investigated. Furthermore, a strategy for the hydrolysis of the BF2 group has been established using aqueous methanol and sodium hydroxide or triethylamine.
- ItemA thiazolo[5,4-: D] thiazole-bridged porphyrin organic framework as a promising nonlinear optical material(London : Royal Society of Chemistry (RSC), 2019) Samal, Mahalaxmi; Valligatla, Sreeramulu; Saad, Nabil A.; Rao, M. Veeramohan; Rao, D. Narayana; Sahu, Rojalin; Biswal, Bishnu P.Porphyrin-based porous organic frameworks are an important group of materials gaining interest due to their structural diversity and distinct opto-electronic properties. However, these materials are seldom explored for nonlinear optical (NLO) applications. In this work, we investigate a thiazolo[5,4-d]thiazole-bridged porous, porphyrin framework (Por-TzTz-POF) with promising NLO properties. The planar TzTz moiety coupled with integrated porphyrin units enables efficient π-conjugation and charge distribution in the Por-TzTz-POF resulting in a high nonlinear absorption coefficient (β = 1100 cm GW-1) with figure of merit (FoM) σ1/σ0 = 5571, in contrast to analogous molecules and material counterparts e.g. metal-organic frameworks (MOFs; β = ∼0.3-0.5 cm GW-1), molecular porphyrins (β = ∼100-400 cm GW-1), graphene (β = 900 cm GW-1), and covalent organic frameworks (Por-COF-HH; β = 1040 cm GW-1 and FoM = 3534). This journal is © The Royal Society of Chemistry.
- ItemBetween Aromatic and Quinoid Structure: A Symmetrical UV to Vis/NIR Benzothiadiazole Redox Switch(Weinheim : Wiley-VCH, 2020) Rietsch, Philipp; Sobottka, Sebastian; Hoffmann, Katrin; Popov, Alexey A.; Hildebrandt, Pascal; Sarkar, Biprajit; Resch-Genger, Ute; Eigler, SiegfriedReversibly switching the light absorption of organic molecules by redox processes is of interest for applications in sensors, light harvesting, smart materials, and medical diagnostics. This work presents a symmetrical benzothiadiazole (BTD) derivative with a high fluorescence quantum yield in solution and in the crystalline state and shows by spectroelectrochemical analysis that reversible switching of UV absorption in the neutral state, to broadband Vis/NIR absorption in the 1st oxidized state, to sharp band Vis absorption in the 2nd oxidized state, is possible. For the one-electron oxidized species, formation of a delocalized radical is confirmed by electron paramagnetic resonance spectroelectrochemistry. Furthermore, our results reveal an increasing quinoidal distortion upon the 1st and 2nd oxidation, which can be used as the leitmotif for the development of BTD based redox switches. © 2020 The Authors. Published by Wiley-VCH GmbH
- ItemLight emission intensities of luminescent Y2O3:Eu and Gd2O3:Eu particles of various sizes(Basel : MDPI, 2017) Adam, Jens; Metzger, Wilhelm; Koch, Marcus; Rogin, Peter; Coenen, Toon; Atchison, Jennifer S.; König, PeterThere is great technological interest in elucidating the effect of particle size on the luminescence efficiency of doped rare earth oxides. This study demonstrates unambiguously that there is a size effect and that it is not dependent on the calcination temperature. The Y2O3:Eu and Gd2O3:Eu particles used in this study were synthesized using wet chemistry to produce particles ranging in size between 7 nm and 326 nm and a commercially available phosphor. These particles were characterized using three excitation methods: UV light at 250 nm wavelength, electron beam at 10 kV, and X-rays generated at 100 kV. Regardless of the excitation source, it was found that with increasing particle diameter there is an increase in emitted light. Furthermore, dense particles emit more light than porous particles. These results can be explained by considering the larger surface area to volume ratio of the smallest particles and increased internal surface area of the pores found in the large particles. For the small particles, the additional surface area hosts adsorbates that lead to non-radiative recombination, and in the porous particles, the pore walls can quench fluorescence. This trend is valid across calcination temperatures and is evident when comparing particles from the same calcination temperature.
- ItemA correlative analysis of gold nanoparticles internalized by A549 cells(Hoboken, NJ : Wiley, 2014) Böse, Katharina; Koch, Marcus; Cavelius, Christian; Kiemer, Alexandra K.; Kraegeloh, AnnetteFluorescently labeled nanoparticles are widely used to investigate nanoparticle cell interactions by fluorescence microscopy. Owing to limited lateral and axial resolution, nanostructures (<100 nm) cannot be resolved by conventional light microscopy techniques. Especially after uptake into cells, a common fate of the fluorescence label and the particle core cannot be taken for granted. In this study, a correlative approach is presented to image fluorescently labeled gold nanoparticles inside whole cells by correlative light and electron microscopy (CLEM). This approach allows for detection of the fluorescently labeled particle shell as well as for the gold core in one sample. In this setup, A549 cells are exposed to 8 nm Atto 647N-labeled gold nanoparticles (3.3 × 109 particles mL−1, 0.02 μg Au mL−1) for 5 h and are subsequently imaged by confocal laser scanning microscopy (CLSM) and transmission electron microscopy (TEM). Eight fluorescence signals located at different intracellular positions are further analyzed by TEM. Five of the eight fluorescence spots are correlated with isolated or agglomerated gold nanoparticles. Three fluorescence signals could not be related to the presence of gold, indicating a loss of the particle shell.