65 results
Search Results
Now showing 1 - 10 of 65
- ItemFe1-xNix alloy nanoparticles encapsulated inside carbon nanotubes: Controlled synthesis, structure and magnetic properties(Basel : MDPI AG, 2018) Ghunaim, R.; Damm, C.; Wolf, D.; Lubk, A.; Büchner, B.; Mertig, M.; Hampel, S.In the present work, different synthesis procedures have been demonstrated to fill carbon nanotubes (CNTs) with Fe1-xNix alloy nanoparticles (x = 0.33, 0.5). CNTs act as templates for the encapsulation of magnetic nanoparticles, and provide a protective shield against oxidation as well as prevent nanoparticles agglomeration. By variation of the reaction parameters, the purity of the samples, degree of filling, the composition and size of filling nanoparticles have been tailored and therefore the magnetic properties. The samples were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Bright-field (BF) TEM tomography, X-ray powder diffraction, superconducting quantum interference device (SQUID) and thermogravimetric analysis (TGA). The Fe1-x Nix-filled CNTs show a huge enhancement in the coercive fields compared to the corresponding bulk materials, which make them excellent candidates for several applications such as magnetic storage devices.
- ItemFarm water productivity in conventional and organic farming: Case studies of cow-calf farming systems in North Germany(Basel : MDPI AG, 2018) Vellenga, L.; Qualitz, G.; Drastig, K.The increase of organic agriculture in Germany raises the question of how water productivity differs from conventional agriculture. On three organic and two conventionally farming systems in Germany, water flows and water related indicators were quantified. Farm water productivity (FWP), farm water productivity of cow-calf production (FWPlivestock), and farm water productivity of food crop production (FWPfood crops) were calculated using the modeling software AgroHyd Farmmodel. The FWP was calculated on a mass and monetary basis. FWPlivestock showed the highest productivity on a mass basis occurring on a conventional farm with 0.09 kg m-3Winput, whereas one organic farm and one conventional farm showed the same results. On a monetary basis, organic cow-calf farming systems showed the highest FWPlivestock, with 0.28 € m-3Winput. Since the productivity of the farm depends strongly on the individual cultivated plants, FWPfood crops was compared at the level of the single crop. The results show furthermore that even with a precise examination of farm water productivity, a high bandwidth of temporal and local values are revealed on different farms: generic FWP for food crops and livestock are not within reach.
- ItemAnalysis of electronic properties frommagnetotransport measurements on Ba(Fe1-xNix)2As2 thin films(Basel : MDPI AG, 2020) Shipulin, I.; Richter, S.; Thomas, A.A.; Nielsch, K.; Hühne, R.; Martovitsky, V.We performed a detailed structural, magnetotransport, and superconducting analysis of thin epitaxial Ba(Fe1-xNix)2As2 films with Ni doping of x = 0.05 and 0.08, as prepared by pulsed laser deposition. X-ray diffraction studies demonstrate the high crystalline perfection of the films, which have a similar quality to single crystals. Furthermore, magnetotransport measurements of the films were performed in magnetic fields up to 9 T. The results we used to estimate the density of electronic states at the Fermi level, the coefficient of electronic heat capacity, and other electronic parameters for this compound, in their dependence on the dopant concentration within the framework of the Ginzburg-Landau-Abrikosov-Gorkov theory. The comparison of the determined parameters with measurement data on comparable Ba(Fe1-xNix)2As2 single crystals shows good agreement, which confirms the high quality of the obtained films.
- ItemEffects of Pre-Processing Short-Term Hot-Water Treatments on Quality and Shelf Life of Fresh-Cut Apple Slices(Basel : MDPI AG, 2019) Rux, Guido; Efe, Efecan; Ulrichs, Christian; Huyskens-Keil, Susanne; Hassenberg, Karin; Herppich, Werner B.Processing, especially cutting, reduces the shelf life of fruits. In practice, fresh-cut fruit salads are, therefore, often sold immersed in sugar syrups to increase shelf life. Pre-processing short-term hot-water treatments (sHWT) may further extend the shelf life of fresh-cuts by effectively reducing microbial contaminations before cutting. In this study, fresh-cut ‘Braeburn’ apples, a major component of fruit salads, were short-term (30 s) hot water-treated (55 °C or 65 °C), partially treated with a commercial anti-browning solution (ascorbic/citric acid) after cutting and, thereafter, stored immersed in sugar syrup. To, for the first time, comprehensively and comparatively evaluate the currently unexplored positive or negative effects of these treatments on fruit quality and shelf life, relevant parameters were analyzed at defined intervals during storage at 4 °C for up to 13 days. Compared to acid pre-treated controls, sHWT significantly reduced the microbial loads of apple slices but did not affect their quality during the 5 day-standard shelf life period of fresh-cuts. Yeasts were most critical for shelf life of fresh-cut apples immersed in sugar syrup. The combination of sHWT and post-processing acid treatment did not further improve quality or extend shelf life. Although sHWT could not extend potential maximum shelf life beyond 10 d, results highlighted the potentials of this technique to replace pre-processing chemical treatments and, thus, to save valuable resources.
- ItemSimulating Cotton Growth and Productivity Using AquaCrop Model under Deficit Irrigation in a Semi-Arid Climate(Basel : MDPI AG, 2022) Aziz, Marjan; Rizvi, Sultan Ahmad; Sultan, Muhammad; Bazmi, Muhammad Sultan Ali; Shamshiri, Redmond R.; Ibrahim, Sobhy M.; Imran, Muhammad A.AquaCrop is a water-driven model that simulates the effect of environment and management on crop production under deficit irrigation. The model was calibrated and validated using three databases and four irrigation treatments (i.e., 100%ET, 80%ET, 70%ET, and 50%ET). Model performance was evaluated by simulating canopy cover (CC), biomass accumulation, and water productivity (WP). Statistics of root mean square error (RMSE) and Willmott’s index of agreement (d) showed that model predictions are suitable for non-stressed and moderate stressed conditions. The results showed that the simulated biomass and yield were consistent with the measured values with a coefficient of determination (R2) of 0.976 and 0.950, respectively. RMSE and d-index values for canopy cover (CC) were 2.67% to 4.47% and 0.991% to 0.998% and for biomass were 0.088 to 0.666 ton/ha and 0.991 to 0.999 ton/ha, respectively. Prediction of simulated and measured biomass and final yield was acceptable with deviation ˂10%. The overall value of R2 for WP in terms of yield was 0.943. Treatment with 80% ET consumed 20% less water than the treatment with 100%ET and resulted in high WP in terms of yield (0.6 kg/m3) and biomass (1.74 kg/m3), respectively. The deviations were in the range of −2% to 11% in yield and −2% to 4% in biomass. It was concluded that AquaCrop is a useful tool in predicting the productivity of cotton under different irrigation scenarios.
- ItemEffects of Promoter on Structural and Surface Properties of Zirconium Oxide-Based Catalyst Materials(Basel : MDPI AG, 2020) Borovinskaya, E.S.; Oswald, S.; Reschetilowski, W.Ternary mixed oxide systems CuO/ZnO/ZrO2 and CuO/NiO/ZrO2 were synthesized by one-pot synthesis for a better understanding of the synthesis-property relationships of zirconium oxide-based catalyst materials. The prepared mixed oxide samples were analysed by a broad range of characterisation methods (XRD, N2-physisorption, Temperature-Programmed Ammonia Desorption (TPAD), and XPS) to examine the structural and surface properties, as well as to identify the location of the potential catalytically active sites. By XPS analysis, it could be shown that a progressive enrichment of the surface composition with copper takes place by changing from ZnO to NiO as a promoter. Thus, by addition of the second component, not only electronic but also the geometric properties of active sites, i.e., copper species distribution within the catalyst surface, can be affected in a desired way.
- ItemManufacturing of 42SiCr-pipes for quenching and partitioning by longitudinal HFI-Welding(Basel : MDPI AG, 2019) Kroll, M.; Birnbaum, P.; Zeisig, J.; Kraeusel, V.; Wagner, M.F.-X.In the pipe manufacturing and pipe processing industry, the demand for cost-effective pipes with high strength and good ductility is increasing. In the present study, the inductive longitudinal welding process was combined with a Quenching and Partitioning (Q&P) treatment to manufacture pipes with enhanced mechanical properties. The aim of the Q&P process is to establish a martensitic structure with increased retained austenite content. This allows for the beneficial use of both phases: the strength of martensite as well as the ductility of retained austenite. A 42SiCr steel, developed for Q&P processes, was joined at the longitudinal seam by a high-frequency induction (HFI) welding process and was subsequently heat-treated. The applied heat treatments included normalizing, austenitizing, quenching, and two Q&P strategies (Q&P-A/Q&P-B) with distinct quenching (Tq = 200/150â—¦ C) and partitioning temperatures (Tp = 300/250â—¦ C). Investigations of the microstructures revealed that Q&P tubes exhibit increased amounts of retained austenite in the martensitic matrix. Differences between the weld junction and the base material occurred, especially regarding the morphology of the martensite; the martensite found in the weld junction is finer and corresponds more to the lath-type morphology, compared to the base material in the circumference. In all zones of the welded tube circumference, retained austenite has been found in similar distributions. The mechanical testing of the individual tubes demonstrated that the Q&P treatments offer increased strength compared to all other states and significantly improved ductility compared to the quenched condition. Therefore, the approach of Q&P treatment of HFI-welded tubes represents a route for the mass production of high-strength tubular products with improved ductility.
- ItemEffect of Chlorine Dioxide Treatment on Human Pathogens on Iceberg Lettuce(Basel : MDPI AG, 2021) Hassenberg, Karin; Praeger, Ulrike; Herppich, Werner B.In the vegetable processing industry, the application of chlorine dioxide (ClO2) as a disinfectant solved in washing water to eliminate undesirable microorganisms harmful to consumers’ health and the shelf life of produce has been discussed for years. The disinfection efficacy depends on various factors, e.g., the location of microorganisms and the organic load of the washing water. The present study analyzed the sanitation efficacy of various concentrations of water-solved ClO2 (cClO2: 20 and 30 mg L−1) on Escherichia coli (1.1 × 104 cfu mL−1), Salmonella enterica (2.0 × 104 cfu mL−1) and Listeria monocytogenes (1.7 × 105 cfu mL−1) loads, located on the leaf surface of iceberg lettuce assigned for fresh-cut salads. In addition, it examined the potential of ClO2 to prevent the cross-contamination of these microbes in lettuce washing water containing a chemical oxygen demand (COD) content of 350 mg L−1 after practice-relevant washing times of 1 and 2 min. On iceberg leaves, washing with 30 mg L−1 ClO2 pronouncedly (1 log) reduced loads of E. coli and S. enterica, while it only insignificantly (<0.5 × log) diminished the loads of L. monocytogenes, irrespective of the ClO2 concentration used. Although the sanitation efficacy of ClO2 washing was only limited, the addition of ClO2 to the washing water avoided cross-contamination even at high organic loads. Thus, the application of ClO2 to the lettuce washing water can improve product quality and consumer safety.
- ItemLarge-scale modeling of absorbing aerosols and their semi-direct effects(Basel : MDPI AG, 2018) Tegen, I.; Heinold, B.Radiative effects of absorbing black carbon and mineral dust aerosols are estimated from global aerosol climate model simulations with fixed sea surface temperatures as a boundary condition. Semi-direct effects are approximated as the residual between the total direct radiative effect and the instantaneous direct radiative effect of the simulated absorbing aerosol species. No distinction is made for aerosols from natural and anthropogenic sources. Results for global average are highly uncertain due to high model variability, but consistent with previous estimates. The global average results for black carbon aerosol semi-direct effects are small due to cancellation of regionally positive or negative effects, and may be positive or negative overall, depending on the model setup. The presence of mineral dust aerosol above dark surfaces and below a layer containing black carbon aerosol may enhance the reflectivity and act to enhance the positive radiative effect of black carbon aerosol. When mineral dust is absent the semi-direct effect at the top-of-atmosphere of black carbon aerosol from both anthropogenic and natural sources is -0.03 Wm-2, while averaging to +0.09 Wm-2 if dust is included.
- ItemClimate change, agriculture, and economic development in Ethiopia(Basel : MDPI AG, 2018) Yalew, A.W.; Hirte, G.; Lotze-Campen, H.; Tscharaktschiew, S.Quantifying the economic effects of climate change is a crucial step for planning adaptation in developing countries. This study assesses the economy-wide and regional effects of climate change-induced productivity and labor supply shocks in Ethiopian agriculture. We pursue a structural approach that blends biophysical and economic models. We consider different crop yield projections and add a regionalization to the country-wide CGE results. The study shows, in the worst case scenario, the effects on country-wide GDP may add up to -8%. The effects on regional value-added GDP are uneven and range from -10% to +2.5%. However, plausible cost-free exogenous structural change scenarios in labor skills and marketing margins may offset about 20-30% of these general equilibrium effects. As such, the ongoing structural transformation in the country may underpin the resilience of the economy to climate change. This can be regarded as a co-benefit of structural change in the country. Nevertheless, given the role of the sector in the current economic structure and the potency of the projected biophysical impacts, adaptation in agriculture is imperative. Otherwise, climate change may make rural livelihoods unpredictable and strain the country's economic progress.