70 results
Search Results
Now showing 1 - 10 of 70
- ItemAutomated and rapid identification of multidrug resistant Escherichia coli against the lead drugs of acylureidopenicillins, cephalosporins, and fluoroquinolones using specific Raman marker bands(Weinheim : Wiley-VCH-Verl., 2020) Götz, Theresa; Dahms, Marcel; Kirchhoff, Johanna; Beleites, Claudia; Glaser, Uwe; Bohnert, Jürgen A.; Pletz, Mathias W.; Popp, Jürgen; Schlattmann, Peter; Neugebauer, UteA Raman-based, strain-independent, semi-automated method is presented that allows the rapid (<3 hours) determination of antibiotic susceptibility of bacterial pathogens isolated from clinical samples. Applying a priori knowledge about the mode of action of the respective antibiotic, we identified characteristic Raman marker bands in the spectrum and calculated batch-wise weighted sum scores from standardized Raman intensity differences between spectra of antibiotic exposed and nonexposed samples of the same strains. The lead substances for three relevant antibiotic classes (fluoroquinolone ciprofloxacin, third-generation cephalosporin cefotaxime, ureidopenicillin piperacillin) against multidrug-resistant Gram-negative bacteria (MRGN) revealed a high sensitivity and specificity for the susceptibility testing of two Escherichia coli laboratory strains and 12 clinical isolates. The method benefits from the parallel incubation of control and treated samples, which reduces the variance due to alterations in cultivation conditions and the standardization of differences between batches leading to long-term comparability of Raman measurements. © 2020 The Authors. Journal of Biophotonics published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- ItemFabrication and characterization of graphene nanoribbons epitaxially grown on SiC(0001)(Berlin : Humboldt-Universität zu Berlin, 2018) Aranha Galves, LaurenEinzelschichten von Graphen-Nanobänders (GNRs) wurden auf SiC(0001)-Substraten mit zwei unterschiedlichen Fehlschnitten bei Temperaturen von 1410 bis 1460 °C synthetisiert. Das GNR-Wachstum lässt sich bei niedriger Stufenkantenhöhe am besten durch eine exponentielle Wachstumsrate, welche mit der Energiebarriere für die Ausdiffusion von Si korreliert ist. Anderseits wird bei Substraten mit höheren Stufenkanten eine nicht-exponentielle Rate beobachtet, was mit der Bildung von mehrlagigen Graphen an den Stufenkanten in Verbindung gebracht wird. Die Sauerstoffinterkalation von epitaktischen GNRs mittels Ausglühen an Luft von Bändern wird als nächstes untersucht, welche auf unterschiedlichen SiC-Substraten gewachsen wurden. Neben der Umwandlung von monolagigem zu zweilagigem Graphen in der Nähe der Stufenkanten von SiC, führt die Sauerstoffinterkalation zusätzlich zu der Bildung einer Oxidschicht auf den Terrassen des Substrats, was die zweilagigen GNRs elektrisch isoliert voneinander zurücklässt. Die elektrische Charakterisierung der zweilagigen GNRs zeigten dass die Bänder durch die Behandlung mit Sauerstoff elektrisch voneinander entkoppelt sind. Eine robuste Lochkonzentration von etwa 1x10¹³ cm-² und Mobilitäten von bis zu 700 cm²/(Vs) wurden für die GNRs mit einer typischen Breite von 100 nm bei Raumtemperatur gemessen. Wohl definierte Mesastrukturen gebildet mittels Elektronenstrahllithographie auf SiC-Substraten, wurde zuletzt untersucht. Die Charakterisierung des Ladungsträgertransports von GNRs die auf den Seitenwänden der strukturierten Terrassen gewachsen wurden, zeigt eine Mobilität im Bereich von 1000 bis 2000 cm²/(Vs), welche für verschiedene Strukturen auf der gesamten Probe homogen ist, was die Reproduzierbarkeit dieses Herstellungsverfahrens hervorhebt, sowie dessen Potential für die Implementierung in zukünftigen Technologien, welche auf epitaktischgewachsenene GNRs basieren.
- ItemCompact, Watt-class 785 nm dual-wavelength master oscillator power amplifiers(Bristol ; Philadelphia, PA : IOP Publishing Ltd., 2022) Müller, André; Maiwald, Martin; Sumpf, Bernd785 nm micro-integrated, dual-wavelength master oscillator power amplifiers with a footprint of 5 mm × 25 mm are presented. They are based on Y-branch distributed Bragg reflector ridge waveguide diode lasers and anti-reflection coated tapered amplifiers. In order to reduce the impact of potential optical feedback, devices with master oscillator front facet reflectivities of 5% and 30% as well as with an integrated miniaturized optical isolator have been realized. A comparison up to 1 W shows narrowband dual wavelength laser emission with a spectral distance of 0.6 nm (10 cm−1) and individual spectral widths <20 pm. As expected, a higher front facet reflectivity leads to a significant reduction of feedback related mode hops. Longitudinal modes corresponding to the master oscillator resonator length remain within spectral windows <0.15 nm (3 cm−1), suitable for applications such as Raman spectroscopy and especially shifted excitation Raman difference spectroscopy. Integrating a compact 30 dB optical isolator completely eliminates the observed optical feedback effects. Lateral beam propagation ratios of 1.2 (1/e2) enable easy beam shaping and fiber coupling. Outside of the experimental comparison, the developed MOPAs provide up to 2.7 W of optical output power available for applications.
- ItemTemperature-dependent Raman investigation of rolled up InGaAs/GaAs microtubes(New York, NY [u.a.] : Springer, 2012) Rodriguez, R.D.; Sheremet, E.; Thurmer, D.J.; Lehmann, D.; Gordan, O.D.; Seidel, F.; Milekhin, A.; Schmidt, O.G.; Hietschold, M.; Zahn, D.R.T.Large arrays of multifunctional rolled-up semiconductors can be mass-produced with precisely controlled size and composition, making them of great technological interest for micro- and nano-scale device fabrication. The microtube behavior at different temperatures is a key factor towards further engineering their functionality, as well as for characterizing strain, defects, and temperature-dependent properties of the structures. For this purpose, we probe optical phonons of GaAs/InGaAs rolled-up microtubes using Raman spectroscopy on defect-rich (faulty) and defect-free microtubes. The microtubes are fabricated by selectively etching an AlAs sacrificial layer in order to release the strained InGaAs/GaAs bilayer, all grown by molecular beam epitaxy. Pristine microtubes show homogeneity of the GaAs and InGaAs peak positions and intensities along the tube, which indicates a defect-free rolling up process, while for a cone-like microtube, a downward shift of the GaAs LO phonon peak along the cone is observed. Formation of other type of defects, including partially unfolded microtubes, can also be related to a high Raman intensity of the TO phonon in GaAs. We argue that the appearance of the TO phonon mode is a consequence of further relaxation of the selection rules due to the defects on the tubes, which makes this phonon useful for failure detection/prediction in such rolled up systems. In order to systematically characterize the temperature stability of the rolled up microtubes, Raman spectra were acquired as a function of sample temperature up to 300°C. The reversibility of the changes in the Raman spectra of the tubes within this temperature range is demonstrated.
- ItemEvaluation of shifted excitation Raman difference spectroscopy and comparison to computational background correction methods applied to biochemical Raman spectra(Basel : MDPI, 2017) Cordero, Eliana; Korinth, Florian; Stiebing, Clara; Krafft, Christoph; Schie, Iwan W.; Popp, JürgenRaman spectroscopy provides label-free biochemical information from tissue samples without complicated sample preparation. The clinical capability of Raman spectroscopy has been demonstrated in a wide range of in vitro and in vivo applications. However, a challenge for in vivo applications is the simultaneous excitation of auto-fluorescence in the majority of tissues of interest, such as liver, bladder, brain, and others. Raman bands are then superimposed on a fluorescence background, which can be several orders of magnitude larger than the Raman signal. To eliminate the disturbing fluorescence background, several approaches are available. Among instrumentational methods shifted excitation Raman difference spectroscopy (SERDS) has been widely applied and studied. Similarly, computational techniques, for instance extended multiplicative scatter correction (EMSC), have also been employed to remove undesired background contributions. Here, we present a theoretical and experimental evaluation and comparison of fluorescence background removal approaches for Raman spectra based on SERDS and EMSC.
- ItemCounterfeit and substandard test of the antimalarial tablet Riamet® by means of Raman hyperspectral multicomponent analysis(Basel : MDPI, 2019) Frosch, Timea; Wyrwich, Elisabeth; Yan, Di; Domes, Christian; Domes, Robert; Popp, Jürgen; Frosch, TorstenThe fight against counterfeit pharmaceuticals is a global issue of utmost importance, as failed medication results in millions of deaths every year. Particularly affected are antimalarial tablets. A very important issue is the identification of substandard tablets that do not contain the nominal amounts of the active pharmaceutical ingredient (API), and the differentiation between genuine products and products without any active ingredient or with a false active ingredient. This work presents a novel approach based on fiber-array based Raman hyperspectral imaging to qualify and quantify the antimalarial APIs lumefantrine and artemether directly and non-invasively in a tablet in a time-efficient way. The investigations were carried out with the antimalarial tablet Riamet® and self-made model tablets, which were used as examples of counterfeits and substandard. Partial least-squares regression modeling and density functional theory calculations were carried out for quantification of lumefantrine and artemether and for spectral band assignment. The most prominent differentiating vibrational signatures of the APIs were presented.
- ItemFLIm and raman spectroscopy for investigating biochemical changes of bovine pericardium upon genipin cross-linking(Basel : MDPI, 2020) Shaik, Tanveer Ahmed; Alfonso-Garcia, Alba; Richter, Martin; Korinth, Florian; Krafft, Christoph; Marcu, Laura; Popp, JürgenBiomaterials used in tissue engineering and regenerative medicine applications benefit from longitudinal monitoring in a non-destructive manner. Label-free imaging based on fluorescence lifetime imaging (FLIm) and Raman spectroscopy were used to monitor the degree of genipin (GE) cross-linking of antigen-removed bovine pericardium (ARBP) at three incubation time points (0.5, 1.0, and 2.5 h). Fluorescence lifetime decreased and the emission spectrum redshifted compared to that of uncross-linked ARBP. The Raman signature of GE-ARBP was resonance-enhanced due to the GE cross-linker that generated new Raman bands at 1165, 1326, 1350, 1380, 1402, 1470, 1506, 1535, 1574, 1630, 1728, and 1741 cm-1. These were validated through density functional theory calculations as cross-linker-specific bands. A multivariate multiple regression model was developed to enhance the biochemical specificity of FLIm parameters fluorescence intensity ratio (R2 = 0.92) and lifetime (R2 = 0.94)) with Raman spectral results. FLIm and Raman spectroscopy detected biochemical changes occurring in the collagenous tissue during the cross-linking process that were characterized by the formation of a blue pigment which affected the tissue fluorescence and scattering properties. In conclusion, FLIm parameters and Raman spectroscopy were used to monitor the degree of cross-linking non-destructively. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemRemineralization of Artificially Demineralized Human Enamel and Dentin Samples by Zinc-Carbonate Hydroxyapatite Nanocrystals(Basel : MDPI, 2022) Kranz, Stefan; Heyder, Markus; Mueller, Stephan; Guellmar, André; Krafft, Christoph; Nietzsche, Sandor; Tschirpke, Caroline; Herold, Volker; Sigusch, Bernd; Reise, Markus(1) Background: Decalcified enamel and dentin surfaces can be regenerated with non-fluoride-containing biomimetic systems. This study aimed to investigate the effect of a zinc carbonate-hydroxyapatite-containing dentifrice on artificially demineralized enamel and dentin surfaces. (2) Methods: Human enamel and dentin discs were prepared and subjected to surface demineralization with 30% orthophosphoric acid for 60 s. Subsequently, in the test group (n = 20), the discs were treated three times a day for 3 min with a zinc carbonate-hydroxyapatite-containing toothpaste (biorepair®). Afterwards, all samples were gently rinsed with PBS (5 s) and stored in artificial saliva until next use. Samples from the control group (n = 20) received no dentifrice-treatment and were stored in artificial saliva, exclusively. After 15 days of daily treatment, specimens were subjected to Raman spectroscopy, energy-dispersive X-ray micro-analysis (EDX), white-light interferometry, and profilometry. (3) Results: Raman spectroscopy and white-light interferometry revealed no significant differences compared to the untreated controls. EDX analysis showed calcium phosphate and silicon dioxide precipitations on treated dentin samples. In addition, treated dentin surfaces showed significant reduced roughness values. (4) Conclusions: Treatment with biorepair® did not affect enamel surfaces as proposed. Minor mineral precipitation and a reduction in surface roughness were detected among dentin surfaces only.
- ItemIn-vivo Raman spectroscopy: from basics to applications(Bellingham, Wash. : SPIE, 2018) Cordero, Eliana; Latka, Ines; Matthäus, Christian; Schie, Iwan W.; Popp, JürgenFor more than two decades, Raman spectroscopy has found widespread use in biological and medical applications. The instrumentation and the statistical evaluation procedures have matured, enabling the lengthy transition from ex-vivo demonstration to in-vivo examinations. This transition goes hand-in-hand with many technological developments and tightly bound requirements for a successful implementation in a clinical environment, which are often difficult to assess for novice scientists in the field. This review outlines the required instrumentation and instrumentation parameters, designs, and developments of fiber optic probes for the in-vivo applications in a clinical setting. It aims at providing an overview of contemporary technology and clinical trials and attempts to identify future developments necessary to bring the emerging technology to the clinical end users. A comprehensive overview of in-vivo applications of fiber optic Raman probes to characterize different tissue and disease types is also given.
- ItemA Review on Data Fusion of Multidimensional Medical and Biomedical Data(Basel : MDPI, 2022) Azam, Kazi Sultana Farhana; Ryabchykov, Oleg; Bocklitz, ThomasData fusion aims to provide a more accurate description of a sample than any one source of data alone. At the same time, data fusion minimizes the uncertainty of the results by combining data from multiple sources. Both aim to improve the characterization of samples and might improve clinical diagnosis and prognosis. In this paper, we present an overview of the advances achieved over the last decades in data fusion approaches in the context of the medical and biomedical fields. We collected approaches for interpreting multiple sources of data in different combinations: image to image, image to biomarker, spectra to image, spectra to spectra, spectra to biomarker, and others. We found that the most prevalent combination is the image-to-image fusion and that most data fusion approaches were applied together with deep learning or machine learning methods.