2 results
Search Results
Now showing 1 - 2 of 2
- Item168-195 GHz Power Amplifier with Output Power Larger Than 18 dBm in BiCMOS Technology(New York, NY : IEEE, 2020) Ali, Abdul; Yun, Jongwon; Giannini, Franco; Ng, Herman Jalli; Kissinger, Dietmar; Colantonio, PaoloThis paper presents a 4-way combined G-band power amplifier (PA) fabricated with a 130-nm SiGe BiCMOS process. First, a single-ended PA based on the cascode topology (CT) is designed at 185 GHz, which consists of three stages to get an overall gain and an output power higher than 27 dB and 13 dBm, respectively. Then, a 4-way combiner/splitter was designed using low-loss transmission lines at 130-210 GHz. Finally, the combiner was loaded with four single-ended PAs to complete the design of a 4-way combined PA. The chip of the fabricated PA occupies an area of 1.35mm2. The realized PA shows a saturated output power of 18.1 dBm with a peak gain of 25.9 dB and power-added efficiency (PAE) of 3.5% at 185 GHz. A maximum output power of 18.7 dBm with PAE of 4.4% is achieved at 170 GHz. The 3-dB and 6-dB bandwidth of the PA are 27 and 42 GHz, respectively. In addition, the PA delivers a saturated output power higher than 18 dBm in the frequency range 140-186 GHz. To the best of our knowledge, the power reported in this paper is the highest for G-band SiGe BiCMOS PAs. © 2013 IEEE.
- ItemMode transitions in distributed-feedback tapered master-oscillator power-amplifier(Berlin : Weierstraß-Institut für Angewandte Analysis und Stochastik, 2008) Radziunas, Mindaugas; Tronciu, Vasile Z.; Bandelow, Uwe; Lichtner, Mark; Spreemann, Martin; Wenzel, HansTheoretical and experimental investigations have been carried out to study the spectral and spatial behavior of monolithically integrated distributed-feedback tapered master-oscillators power-amplifiers emitting around 973 nm. Introduction of self and cross heating effects and the analysis of longitudinal optical modes allows us to explain experimental results. The results show a good qualitative agreement between measured and calculated characteristics.