178 results
Search Results
Now showing 1 - 10 of 178
- ItemBiogas crops grown in energy crop rotations: Linking chemical composition and methane production characteristics(Amsterdam : Elsevier, 2016) Herrmann, Christiane; Idler, Christine; Heiermann, MonikaMethane production characteristics and chemical composition of 405 silages from 43 different crop species were examined using uniform laboratory methods, with the aim to characterise a wide range of crop feedstocks from energy crop rotations and to identify main parameters that influence biomass quality for biogas production. Methane formation was analysed from chopped and over 90 days ensiled crop biomass in batch anaerobic digestion tests without further pre-treatment. Lignin content of crop biomass was found to be the most significant explanatory variable for specific methane yields while the methane content and methane production rates were mainly affected by the content of nitrogen-free extracts and neutral detergent fibre, respectively. The accumulation of butyric acid and alcohols during the ensiling process had significant impact on specific methane yields and methane contents of crop silages. It is proposed that products of silage fermentation should be considered when evaluating crop silages for biogas production.
- ItemPolymeric monolithic materials: Syntheses, properties, functionalization and applications(Amsterdam : Elsevier, 2007) Buchmeiser, M.R.The synthetic particularities for the synthesis of polymer-based monolithic materials are summarized. In this context, monoliths prepared via thermal-, UV- or electron-beam triggered free radical polymerization, controlled TEMPO-mediated radical polymerization, polyaddition, polycondensation as well as living ring-opening metathesis polymerization (ROMP) will be covered. Particular attention is devoted to the aspects of controlling pore sizes, pore volumes and pore size distributions as well as functionalization of these supports. Finally, selected, recent applications in separation science, (bio-) catalysis and chip technology will be summarized. © 2007 Elsevier Ltd. All rights reserved.
- ItemMultiproxy approach to the reconstruction of soil denudation events and the disappearance of Luvisols in the loess landscape of south-western Poland(Amsterdam : Elsevier, 2022) Loba, Aleksandra; Zhang, Junjie; Tsukamoto, Sumiko; Kasprzak, Marek; Beata Kowalska, Joanna; Frechen, Manfred; Waroszewski, JarosławLoess landscapes are highly susceptible to soil redeposition processes and thus may provide detailed insights into the record of denudation processes. Using optically stimulated luminescence dating and the soil micromorphology of 12 soil profiles, we reconstructed a complete record of denudation processes in south-western Poland. The first episode of soil redeposition took place around 9.1 ka. The denudation events that followed were attributed to the Neolithic (6.4 ± 0.3 ka), early Bronze Age (3.8 ± 0.2 ka), early and late Middle Ages (1.5 ± 0.1 ka and 0.7 ± 0.03 ka, respectively) and early Modern (0.4 ± 0.02 ka). As a consequence of the denudation processes, the soil cover in the studied area had been strongly reshaped. The predominant Luvisols had experienced progressive erosion processes that led first to a significant shallowing of the eluvial and argic horizons (truncated Luvisol) and, after some time, to their complete removal. Further thinning of the loess mantles had exposed geological substrates with very weak pedogenic alternations, thus pushing their transformation towards Regosol types. Similarly, Regosols occurred in toeslopes where freshly eroded material had been deposited, and where diagnostic horizons had not yet developed. Modern soil erosion rates in the studied loess area have considerably increased, and it is estimated that the Luvisol status may be completely transformed within approximately 80–300 years, if not sooner, due to progressive climate change.
- ItemA European aerosol phenomenology-5: Climatology of black carbon optical properties at 9 regional background sites across Europe(Amsterdam : Elsevier, 2016) Zanatta, M.; Gysel, M.; Bukowiecki, N.; Müller, T.; Weingartner, E.; Areskoug, H.; Fiebig, M.; Yttri, K.E.; Mihalopoulos, N.; Kouvarakis, G.; Beddows, D.; Harrison, R.M.; Cavalli, F.; Putaud, J.P.; Spindler, G.; Wiedensohler, A.; Alastuey, A.; Pandolfi, M.; Sellegri, K.; Swietlicki, E.; Jaffrezo, J.L.; Baltensperger, U.; Laj, P.A reliable assessment of the optical properties of atmospheric black carbon is of crucial importance for an accurate estimation of radiative forcing. In this study we investigated the spatio-temporal variability of the mass absorption cross-section (MAC) of atmospheric black carbon, defined as light absorption coefficient (σap) divided by elemental carbon mass concentration (mEC). σap and mEC have been monitored at supersites of the ACTRIS network for a minimum period of one year. The 9 rural background sites considered in this study cover southern Scandinavia, central Europe and the Mediterranean. σap was determined using filter based absorption photometers and mEC using a thermal-optical technique. Homogeneity of the data-set was ensured by harmonization of all involved methods and instruments during extensive intercomparison exercises at the European Center for Aerosol Calibration (ECAC). Annual mean values of σap at a wavelength of 637 nm vary between 0.66 and 1.3 Mm−1 in southern Scandinavia, 3.7–11 Mm−1 in Central Europe and the British Isles, and 2.3–2.8 Mm−1 in the Mediterranean. Annual mean values of mEC vary between 0.084 and 0.23 μg m−3 in southern Scandinavia, 0.28–1.1 in Central Europe and the British Isles, and 0.22–0.26 in the Mediterranean. Both σap and mEC in southern Scandinavia and Central Europe have a distinct seasonality with maxima during the cold season and minima during summer, whereas at the Mediterranean sites an opposite trend was observed. Annual mean MAC values were quite similar across all sites and the seasonal variability was small at most sites. Consequently, a MAC value of 10.0 m2 g−1 (geometric standard deviation = 1.33) at a wavelength of 637 nm can be considered to be representative of the mixed boundary layer at European background sites, where BC is expected to be internally mixed to a large extent. The observed spatial variability is rather small compared to the variability of values in previous literature, indicating that the harmonization efforts resulted in substantially increased precision of the reported MAC. However, absolute uncertainties of the reported MAC values remain as high as ± 30–70% due to the lack of appropriate reference methods and calibration materials. The mass ratio between elemental carbon and non-light-absorbing matter was used as a proxy for the thickness of coatings around the BC cores, in order to assess the influence of the mixing state on the MAC of BC. Indeed, the MAC was found to increase with increasing values of the coating thickness proxy. This provides evidence that coatings do increase the MAC of atmospheric BC to some extent, which is commonly referred to as lensing effect.
- ItemHydrothermal carbonization (HTC): Near infrared spectroscopy and partial least-squares regression for determination of selective components in HTC solid and liquid products derived from maize silage(Amsterdam : Elsevier, 2014) Reza, M. Toufiq; Becker, Wolfgang; Sachsenheimer, Kerstin; Mumme, JanNear-infrared (NIR) spectroscopy was evaluated as a rapid method of predicting fiber components (hemicellulose, cellulose, lignin, and ash) and selective compounds of hydrochar and corresponding process liquor produced by hydrothermal carbonization (HTC) of maize silage. Several HTC reaction times and temperatures were applied and NIR spectra of both HTC solids and liquids were obtained and correlated with concentration determined from van-Soest fiber analysis, IC, and UHPLC. Partial least-squares regression was applied to calculate models for the prediction of selective substances. The model developed with the spectra had the best performance in 3–7 factors with a correlation coefficient, which varied between 0.9275–0.9880 and 0.9364–0.9957 for compounds in solid and liquid, respectively. Calculated root mean square errors of prediction (RMSEP) were 0.42–5.06 mg/kg. The preliminary results indicate that NIR, a widely applied technique, might be applied to determine chemical compounds in HTC solid and liquid.
- ItemLow temperature thermoluminescence of β-Ga2O3 scintillator(Amsterdam : Elsevier, 2022) Witkowski, Marcin E.; Drozdowski, Konrad J.; Makowski, Michał; Drozdowski, Winicjusz; Wojtowicz, Andrzej J.; Irmscher, Klaus; Schewski, Robert; Galazka, ZbigniewLow temperature thermoluminescence of β-Ga2O3, β-Ga2O3:Al and β-Ga2O3:Ce has been investigated. Glow curves have been analyzed quantitatively using a rate equations model in order to determine the traps parameters, such as activation energies, capture cross-sections and probabilities of recombination and retrapping.
- ItemOptimal carbon taxation and horizontal equity: A welfare-theoretic approach with application to German household data(Amsterdam : Elsevier, 2022) Hänsel, Martin C.; Franks, Max; Kalkuhl, Matthias; Edenhofer, OttmarWe develop a model of optimal taxation and redistribution under an ambitious climate target. We take into account vertical income differences, but also explicitly capture horizontal equity concerns by considering heterogeneous energy efficiencies. By deriving first- and second-best rules for policy instruments including carbon and labor taxes, transfers and energy subsidies, we investigate analytically how vertical and horizontal inequality is considered in the welfare maximizing tax structure. We calibrate the model to German household data and a 30 percent emission reduction goal and show that redistribution of carbon tax revenues via household-specific transfers is the first-best policy. Under plausible assumptions on inequality aversion, transfers to energy-intensive households should be about five times higher than transfers to energy-efficient households. Equal per-capita transfers do not require to observe households’ efficiency type, but increase equity-weighted mitigation costs by around 5 percent compared to the first-best. Mitigation costs increase by less, if the government can implement a uniform clean energy subsidy or household-specific tax-subsidy schemes on energy consumption and labor income that target heterogeneous energy efficiencies. Horizontal equity concerns may therefore constitute a new second-best rationale for clean energy policies or differentiated energy taxes.
- ItemA conceptual framework for analysing and measuring land-use intensity(Amsterdam : Elsevier, 2013) Erb, Karl-Heinz; Haberl, Helmut; Jepsen, Martin Rudbeck; Kuemmerle, Tobias; Lindner, Marcus; Müller, Daniel; Verburg, Peter H.; Reenberg, AnetteLarge knowledge gaps currently exist that limit our ability to understand and characterise dynamics and patterns of land-use intensity: in particular, a comprehensive conceptual framework and a system of measurement are lacking. This situation hampers the development of a sound understanding of the mechanisms, determinants, and constraints underlying changes in land-use intensity. On the basis of a review of approaches for studying land-use intensity, we propose a conceptual framework to quantify and analyse land-use intensity. This framework integrates three dimensions: (a) input intensity, (b) output intensity, and (c) the associated system-level impacts of land- based production (e.g. changes in carbon storage or biodiversity). The systematic development of indicators across these dimensions would provide opportunities for the systematic analyses of the trade-offs, synergies and opportunity costs of land-use intensification strategies.
- ItemCohesive detachment of an elastic pillar from a dissimilar substrate(Amsterdam : Elsevier, 2017) Fleck, Norman A.; Khaderi, Syed Nizamuddin; McMeeking, Robert M.; Arzt, EduardThe adhesion of micron-scale surfaces due to intermolecular interactions is a subject of in- tense interest spanning electronics, biomechanics and the application of soft materials to engineering devices. The degree of adhesion is sensitive to the diameter of micro-pillars in addition to the degree of elastic mismatch between pillar and substrate. Adhesion- strength-controlled detachment of an elastic circular cylinder from a dissimilar substrate is predicted using a Dugdale-type of analysis, with a cohesive zone of uniform tensile strength emanating from the interface corner. Detachment initiates when the opening of the cohesive zone attains a critical value, giving way to crack formation. When the cohe- sive zone size at crack initiation is small compared to the pillar diameter, the initiation of detachment can be expressed in terms of a critical value H c of the corner stress inten- sity. The estimated pull-offforce is somewhat sensitive to the choice of stick/slip boundary condition used on the cohesive zone, especially when the substrate material is much stiffer than the pillar material. The analysis can be used to predict the sensitivity of detachment force to the size of pillar and to the degree of elastic mismatch between pillar and sub- strate.
- ItemAutomated tangential-flow diafiltration device(Amsterdam : Elsevier, 2021) Lüken, Arne; Bruckhaus, Maike; Kosfeld, Udo; Emondts, Meike; Wessling, MatthiasTangential flow filtration (TFF) is a chemical unit operation used to purify and concentrate liquid suspensions of colloids, proteins, or cells. The solution flows tangentially across a membrane, such that a selective part of the fluid permeates the membrane while the filtrated matter is retained, increasing its concentration. TFF is a mild mechanical purification method that does not interact chemically with the filtrate. It is applied in sensitive separation tasks in protein chemistry, microbiology, or immunology. It is a fast alternative for dialysis applications, also applicable in the field of colloid purification. However, the costs of automated lab-scale devices (30,000 €) and the consumable membrane modules (100–600 €) make TFF currently hardly accessible for lab-scale polymer researchers. Therefore, we built a low-cost TFF system (2400 €) partly automated by an Arduino microcontroller and optimized for diafiltration buffer exchange and concentration processes in soft matter colloid research. We use medical hemodialysis membrane modules that only cost a share (20–50 €) of alternative TFF modules, and we demonstrate the functionality of the system for an exemplary colloidal microgel purification process.