5 results
Search Results
Now showing 1 - 5 of 5
- ItemModelling of sea salt concentrations over Europe: Key uncertainties and comparison with observations(München : European Geopyhsical Union, 2011) Tsyro, S.; Aas, W.; Soares, J.; Sofiev, M.; Berge, H.; Spindler, G.Sea salt aerosol can significantly affect the air quality. Sea salt can cause enhanced concentrations of particulate matter and change particle chemical composition, in particular in coastal areas, and therefore should be accounted for in air quality modelling. We have used an EMEP Unified model to calculate sea salt concentrations and depositions over Europe, focusing on studying the effects of uncertainties in sea salt production and lifetime on calculation results. Model calculations of sea salt have been compared with EMEP observations of sodium concentrations in air and precipitation for a four year period, from 2004 to 2007, including size (fine/coarse) resolved EMEP intensive measurements in 2006 and 2007. In the presented calculations, sodium air concentrations are between 8% and 46% overestimated, whereas concentrations in precipitation are systematically underestimated by 65–70% for years 2004–2007. A series of model tests have been performed to investigate the reasons for this underestimation, but further studies are needed. The model is found to reproduce the spatial distribution of Na+ in air and precipitation over Europe fairly well, and to capture most of sea salt episodes. The paper presents the main findings from a series of tests in which we compare several different sea spray source functions and also look at the effects of meteorological input and the efficiency of removal processes on calculated sea salt concentrations. Finally, sea salt calculations with the EMEP model have been compared with results from the SILAM model and observations for 2007. While the models produce quite close results for Na+ at the majority of 26 measurement sites, discrepancies in terms of bias and temporal correlation are also found. Those differences are believed to occur due to differences in the representation of source function and size distribution of sea salt aerosol, different meteorology used for model runs and the different models' resolution. This study contributes to getting a better insight on uncertainties associated with sea salt calculations and thus facilitates further improvement of aerosol modelling on both regional and global scales.
- ItemA new model of meteoric calcium in the mesosphere and lower thermosphere(Katlenburg-Lindau : EGU, 2018-10-16) Plane, John M. C.; Feng, Wuhu; Gómez Martín, Juan Carlos; Gerding, Michael; Raizada, ShikhaMeteoric ablation produces layers of metal atoms in the mesosphere and lower thermosphere (MLT). It has been known for more than 30 years that the Ca atom layer is depleted by over 2 orders of magnitude compared with Na, despite these elements having nearly the same elemental abundance in chondritic meteorites. In contrast, the Ca+ ion abundance is depleted by less than a factor of 10. To explain these observations, a large database of neutral and ion–molecule reaction kinetics of Ca species, measured over the past decade, was incorporated into the Whole Atmosphere Community Climate Model (WACCM). A new meteoric input function for Ca and Na, derived using a chemical ablation model that has been tested experimentally with a Meteoric Ablation Simulator, shows that Ca ablates almost 1 order of magnitude less efficiently than Na. WACCM-Ca simulates the seasonal Ca layer satisfactorily when compared with lidar observations, but tends to overestimate Ca+ measurements made by rocket mass spectrometry and lidar. A key finding is that CaOH and CaCO3 are very stable reservoir species because they are involved in essentially closed reaction cycles with O2 and O. This has been demonstrated experimentally for CaOH, and in this study for CaCO3 using electronic structure and statistical rate theory. Most of the neutral Ca is therefore locked in these reservoirs, enabling rapid loss through polymerization into meteoric smoke particles, and this explains the extreme depletion of Ca.
- ItemEvaluation of a three-dimensional chemical transport model (PMCAMx) in the European domain during the EUCAARI May 2008 campaign(München : European Geopyhsical Union, 2011) Fountoukis, C.; Racherla, P.N.; Denier van der Gon, H.A.C.; Polymeneas, P.; Charalampidis, P.E.; Pilinis, C.; Wiedensohler, A.; Dall'Osto, M.; O'Dowd, C.; Pandis, S.N.Sea salt aerosol can significantly affect the air quality. Sea salt can cause enhanced concentrations of particulate matter and change particle chemical composition, in particular in coastal areas, and therefore should be accounted for in air quality modelling. We have used an EMEP Unified model to calculate sea salt concentrations and depositions over Europe, focusing on studying the effects of uncertainties in sea salt production and lifetime on calculation results. Model calculations of sea salt have been compared with EMEP observations of sodium concentrations in air and precipitation for a four year period, from 2004 to 2007, including size (fine/coarse) resolved EMEP intensive measurements in 2006 and 2007. In the presented calculations, sodium air concentrations are between 8% and 46% overestimated, whereas concentrations in precipitation are systematically underestimated by 65–70% for years 2004–2007. A series of model tests have been performed to investigate the reasons for this underestimation, but further studies are needed. The model is found to reproduce the spatial distribution of Na+ in air and precipitation over Europe fairly well, and to capture most of sea salt episodes. The paper presents the main findings from a series of tests in which we compare several different sea spray source functions and also look at the effects of meteorological input and the efficiency of removal processes on calculated sea salt concentrations. Finally, sea salt calculations with the EMEP model have been compared with results from the SILAM model and observations for 2007. While the models produce quite close results for Na+ at the majority of 26 measurement sites, discrepancies in terms of bias and temporal correlation are also found. Those differences are believed to occur due to differences in the representation of source function and size distribution of sea salt aerosol, different meteorology used for model runs and the different models' resolution. This study contributes to getting a better insight on uncertainties associated with sea salt calculations and thus facilitates further improvement of aerosol modelling on both regional and global scales.
- ItemA case study of a sporadic sodium layer observed by the ALOMAR Weber Na lidar(München : European Geopyhsical Union, 2008) Nesse, H.; Heinrich, D.; Williams, B.; Hoppe, U.-P.; Stadsnes, J.; Rietveld, M.; Singer, W.; Blum, U.; Sandanger, M.I.; Trondsen, E.Simultaneous measurements of temperature and polar mesosphere summer echoes (PMSE) were performed at the polar cap (78° N) during summer 2001 and 2003. In summer time the mesopause region is characterized by extremely low temperatures around 120 K. It is remarkable that PMSE are practically never observed above 92 km although temperatures are low enough to allow the existence of ice particles. In this case study we compare the PMSE topside with temperatures measured by the potassium lidar and with frost point temperatures using water-vapor mixing ratios from models. We find striking discrepancies with our current understanding of ice particles and temperature in this region. In this case study we find that the temperature can be more than 20 K lower than the frost point temperature but no PMSE is observed above 92 km altitude. We show that the lack of PMSE does not necessarily imply that the temperature is too high.
- ItemVerbundprojekt: Batterie – Stationär in Sachsen (BaSta), Teilvorhaben: Leibniz IFW : Schlussbericht ; Berichtszeitraum: 01.11.2012-30.04.2016(Hannover : Technische Informationsbibliothek (TIB), 2016) Eckert, Jürgen; Giebeler, LarsDie Entwicklung und Umsetzung umfasst eines völlig neuartigen Batteriekonzeptes, der die Vorteile der bisherigen Na-S-Hochtemperaturbatterien (z.B. niedrige Kosten und hohe Verfügbarkeit der notwendigen Rohstoffe) mit der Performance moderner Lithium-Ionenbatterien, jedoch auf Na-Ionenbasis, im Niedertemperaturbereich verknüpft. Dazu müssen neue Elektroden- bzw. Separatormaterialien mit vorteilhafter Interaktion und Degradationsstabilität in verschiedenen neuartigen Elektrolyten entwickelt werden. Darüber hinaus werden geeignete Verfahren zur Herstellung und Fertigung dieser Komponenten zu Niedertemperatur-Na-S-Batterien generiert. Die Ziele sollen durch die außerordentlich enge Vernetzung mehrerer Professuren der TU Dresden mit verschiedenen Instituten der Fraunhofer Gesellschaft, dem Leibniz IFW Dresden e.V. und der TU Bergakademie Freiberg erreicht werden. Der Arbeitsplan sieht eine 'bottom up' Strategie von der Materialentwicklung und Charakterisierung über die Werkstoffprozessierung hin zur Systementwicklung und -charakterisierung vor. Die universitären Einrichtungen arbeiten dabei vorwiegend grundlagenorientiert auf dem Gebiet der Materialentwicklung für einen völlig neuen Batterietyp. Die dabei gewonnenen Erkenntnisse werden unmittelbar in die anwendungsorientierte Forschung überführt. Entscheidend ist die interaktive Zusammenarbeit zu allen Zeitpunkten und auf allen Ebenen des Gesamtvorhabens.