4 results
Search Results
Now showing 1 - 4 of 4
- ItemStructural and Electric Properties of Epitaxial Na0.5Bi0.5TiO3-Based Thin Films(Basel : MDPI, 2021) Magalhaes, Bruno; Engelhardt, Stefan; Molin, Christian; Gebhardt, Sylvia E.; Nielsch, Kornelius; Hühne, RubenSubstantial efforts are dedicated worldwide to use lead-free materials for environmentally friendly processes in electrocaloric cooling. Whereas investigations on bulk materials showed that Na0.5Bi0.5TiO3 (NBT)-based compounds might be suitable for such applications, our aim is to clarify the feasibility of epitaxial NBT-based thin films for more detailed investigations on the correlation between the composition, microstructure, and functional properties. Therefore, NBT-based thin films were grown by pulsed laser deposition on different single crystalline substrates using a thin epitaxial La0.5Sr0.5CoO3 layer as the bottom electrode for subsequent electric measurements. Structural characterization revealed an undisturbed epitaxial growth of NBT on lattice-matching substrates with a columnar microstructure, but high roughness and increasing grain size with larger film thickness. Dielectric measurements indicate a shift of the phase transition to lower temperatures compared to bulk samples as well as a reduced permittivity and increased losses at higher temperatures. Whereas polarization loops taken at −100 °C revealed a distinct ferroelectric behavior, room temperature data showed a significant resistive contribution in these measurements. Leakage current studies confirmed a non-negligible conductivity between the electrodes, thus preventing an indirect characterization of the electrocaloric properties of these films.
- ItemEffect of Silver Doping on the Superconducting and Structural Properties of YBCO Films Grown by PLD on Different Templates(Basel : MDPI, 2022) Shipulin, Ilya A.; Thomas, Aleena Anna; Holleis, Sigrid; Eisterer, Michael; Nielsch, Kornelius; Hühne, RubenWe report the local structural and superconducting properties of undoped and Ag-doped YBa2Cu3O6+x (YBCO) films with a thickness of up to 1 µm prepared by pulsed laser deposition on SrTiO3 (STO) single crystals and on ion-beam-assisted deposition (IBAD) and rolling-assisted biaxially textured substrate (RABiTS)-based metal templates. X-ray diffraction demonstrates the high crystalline quality of the films on both single crystalline substrates and metal-based templates, respectively. Although there was only a slight decrease in Tc of up to 1.5 K for the Ag-doped YBCO films on all substrates, we found significant changes in their transport characteristics. The effect of the silver doping mainly depended on the concentration of silver, the type of substrate, and the temperature and magnetic field. In general, the greatest improvement in Jc over a wide range of magnetic fields and temperatures was observed for the 5%Ag-doped YBCO films on STO substrates, showing a significant increase compared to undoped films. Furthermore, a slight Jc improvement was observed for the 2%Ag-doped YBCO films on the RABiTS templates at temperatures below 65 K, whereas Jc decreased for the Ag-doped films on IBAD-MgO-based templates compared to undoped YBCO films. Using detailed electron microscopy studies, small changes in the local microstructure of the Ag-doped YBCO films were revealed; however, no clear correlation was found with the transport properties of the films.
- ItemInfluence of Lattice Mismatch on Structural and Functional Properties of Epitaxial Ba0.7Sr0.3TiO3 Thin Films(Basel : MDPI, 2023) Wawra, Jonas; Nielsch, Kornelius; Hühne, RubenSubstrate-induced strains can significantly influence the structural properties of epitaxial thin films. In ferroelectrics, this might lead to significant changes in the functional properties due to the strong electromechanical coupling in those materials. To study this in more detail, epitaxial Ba0.7Sr0.3TiO3 films, which have a perovskite structure and a structural phase transition close to room temperature, were grown with different thicknesses on REScO3 (RE–rare earth element) substrates having a smaller lattice mismatch compared to SrTiO3. A fully strained SrRuO3 bottom electrode and Pt top contacts were used to achieve a capacitor-like architecture. Different X-ray diffraction techniques were applied to study the microstructure of the films. Epitaxial films with a higher crystalline quality were obtained on scandates in comparison to SrTiO3, whereas the strain state of the functional layer was strongly dependent on the chosen substrate and the thickness. Differences in permittivity and a non-linear polarization behavior were observed at higher temperatures, suggesting that ferroelectricity is supressed under tensile strain conditions in contrast to compressive strain for our measurement configuration, while a similar reentrant relaxor-like behavior was found in all studied layers below 0°C.
- ItemAbsolute Absorption Measurements in Optical Coatings by Laser Induced Deflection(Basel : MDPI, 2019) Bublitz, Simon; Mühlig, ChristianAbsolute measurement of residual absorption in optical coatings is steadily becoming more important in thin film characterization, in particular with respect to high power laser applications. A summary is given on the current ability of the laser induced deflection (LID) technique to serve sensitive photo-thermal absorption measurements combined with reliable absolute calibration based on an electrical heater approach. To account for different measurement requirements, several concepts have been derived to accordingly adapt the original LID concept. Experimental results are presented for prominent UV and deep UV laser wavelengths, covering a variety of factors that critically can influence the absorption properties in optical coatings e.g., deposition process, defects and impurities, intense laser irradiation and surface/interface engineering. The experimental findings demonstrate that by combining high sensitivity with absolute calibration, photo-thermal absorption measurements are able to be a valuable supplement for the characterization of optical thin films and coatings.