Search Results
High temperature behavior of rual thin films on piezoelectric CTGS and LGS substrates
2020, Seifert, M.
This paper reports on a significant further improvement of the high temperature stability of RuAl thin films (110 nm) on the piezoelectric Ca3TaGa3Si2O14 (CTGS) and La3Ga5SiO14 (LGS) substrates. RuAl thin films with AlN or SiO2 cover layers and barriers to the substrate (each 20 nm), as well as a combination of both were prepared on thermally oxidized Si substrates, which serve as a reference for fundamental studies, and the piezoelectric CTGS, as well as LGS substrates. In somefilms, additional Al layers were added. To study their high temperature stability, the samples were annealed in air and in high vacuum up to 900 °C, and subsequently their cross-sections, phase formation, film chemistry, and electrical resistivity were analyzed. It was shown that on thermally oxidized Si substrates, all films were stable after annealing in air up to 800 °C and in high vacuum up to 900 °C. The high temperature stability of RuAl thin films on CTGS substrates was improved up to 900 °C in high vacuum by the application of a combined AlN/SiO2 barrier layer and up to 800 °C in air using a SiO2 barrier. On LGS, the films were only stable up to 600 °C in air; however, a single SiO2 barrier layer was sufficient to prevent oxidation during annealing at 900 °C in high vacuum.
Drilling into an active mofette: pilot-hole study of the impact of CO2-rich mantle-derived fluids on the geo–bio interaction in the western Eger Rift (Czech Republic)
2017, Bussert, Robert, Kämpf, Horst, Flechsig, Christina, Hesse, Katja, Nickschick, Tobias, Liu, Qi, Umlauft, Josefine, Vylita, Tomáš, Wagner, Dirk, Wonik, Thomas, Flores, Hortencia Estrella, Alawi, Mashal
Microbial life in the continental "deep biosphere" is closely linked to geodynamic processes, yet this interaction is poorly studied. The Cheb Basin in the western Eger Rift (Czech Republic) is an ideal place for such a study because it displays almost permanent seismic activity along active faults with earthquake swarms up to ML 4.5 and intense degassing of mantle-derived CO2 in conduits that show up at the surface in form of mofettes. We hypothesize that microbial life is significantly accelerated in active fault zones and in CO2 conduits, due to increased fluid and substrate flow. To test this hypothesis, pilot hole HJB-1 was drilled in spring 2016 at the major mofette of the Hartoušov mofette field, after extensive pre-drill surveys to optimize the well location. After drilling through a thin caprock-like structure at 78.5 m, a CO2 blowout occurred indicating a CO2 reservoir in the underlying sandy clay. A pumping test revealed the presence of mineral water dominated by Na+, Ca2+, HCO3−, SO42− (Na-Ca-HCO3-SO4 type) having a temperature of 18.6 °C and a conductivity of 6760 µS cm−1. The high content of sulfate (1470 mg L−1) is typical of Carlsbad Spa mineral waters. The hole penetrated about 90 m of Cenozoic sediments and reached a final depth of 108.50 m in Palaeozoic schists. Core recovery was about 85 %. The cored sediments are mudstones with minor carbonates, sandstones and lignite coals that were deposited in a lacustrine environment. Deformation structures and alteration features are abundant in the core. Ongoing studies will show if they result from the flow of CO2-rich fluids or not.
Inter-granular effects at high magnetic fields of cuprate and iron chalcogenide superconducting materials
2019, Buchkov, K., Valkovski, M., Gajda, D., Nenkov, K., Nazarova, E.
The weak links effects are one of the main challenges for effective power applications of high temperature superconducting materials. Studies of these effects help for their better understanding and subsequent improvement. An overview analysis of the intergranular properties of cuprate (Y0.8Ca0.2Ba2Cu3O7-δ) and iron-based chalcogenide (FeSe0.5Te0.5) polycrystalline samples was carried out, by means of series of electro-transport experiments at different magnetic fields. The temperature evolution of the Josephson coupling and intrinsic superconductivity effects for the both systems was constructed. The FeSe0.5Te0.5 compound shows very stable and superior behavior compared to Y0.8Ca0.2BCO up to the highest magnetic fields (14T) used. We have explored FeSe0.5Te0.5 Josephson weak links influence (as a non-linear process) over the resistive transition using different AC current amplitudes and applying the sensitive AC transport third harmonics technique.
Highly efficient soft x-ray spectrometer for transient absorption spectroscopy with broadband table-top high harmonic sources
2021, Kleine, Carlo, Ekimova, Maria, Winghart, Marc-Oliver, Eckert, Sebastian, Reichel, Oliver, Löchel, Heike, Probst, Jürgen, Braig, Christoph, Seifert, Christian, Erko, Alexei, Sokolov, Andrey, Vrakking, Marc J. J., Nibbering, Erik T. J., Rouzée, Arnaud
We present a novel soft x-ray spectrometer for ultrafast absorption spectroscopy utilizing table-top femtosecond high-order harmonic sources. Where most commercially available spectrometers rely on spherical variable line space gratings with a typical efficiency on the order of 3% in the first diffractive order, this spectrometer, based on a Hettrick-Underwood design, includes a reflective zone plate as a dispersive element. An improved efficiency of 12% at the N K-edge is achieved, accompanied by a resolving power of 890. The high performance of the soft x-ray spectrometer is further demonstrated by comparing nitrogen K-edge absorption spectra from calcium nitrate in aqueous solution obtained with our high-order harmonic source to previous measurements performed at the electron storage ring facility BESSY II.
High-temperature electromechanical loss in piezoelectric langasite and catangasite crystals
2021, Suhak, Yuriy, Fritze, Holger, Sotnikov, Andrei, Schmidt, Hagen, Johnson, Ward L.
Temperature-dependent acoustic loss Q−1 is studied in partially disordered langasite (LGS, La3Ga5SiO14) and ordered catangasite (CTGS, Ca3TaGa3Si2O14) crystals and compared with previously reported CTGS and langatate (LGT, La3Ga5.5Ta0.5O14) data. Two independent techniques, a contactless tone-burst excitation technique and contacting resonant piezoelectric spectroscopy, are used in this study. Contributions to the measured Q−1(T) are determined through fitting to physics-based functions, and the extracted fit parameters, including the activation energies of the processes, are discussed. It is shown that losses in LGS and CTGS are caused by a superposition of several mechanisms, including intrinsic phonon–phonon loss, point-defect relaxations, and conductivity-related relaxations.