Search Results
Carboxylated nitrile butadiene rubber/hybrid filler composites
2012, Mousa, A., Heinrich, G., Simon, F., Wagenknecht, U., Stöckelhuber, K.-W., Dweiri, R.
The surface properties of the OSW and NLS are measured with the dynamic contact-angle technique. The x-ray photoelectron spectroscopy (XPS) of the OSW reveals that the OSW possesses various reactive functional groups namely hydroxyl groups (OH). Hybrid filler from NLS and OSW were incorporated into carboxylated nitrile rubber (XNBR) to produce XNBR hybrid composites. The reaction of OH groups from the OSW with COOH of the XNBR is checked by attenuated total reflectance spectra (ATR-IR) of the composites. The degree of curing ΔM (maximum torque-minimum torque) as a function of hybrid filler as derived from moving die rheometer (MDR) is reported. The stress-strain behavior of the hybrid composites as well as the dynamic mechanical thermal analysis (DMTA) is studied. Bonding quality and dispersion of the hybrid filler with and in XNBR are examined using scanning-transmission electron microscopy (STEM in SEM).
Poisoning of bubble propelled catalytic micromotors: The chemical environment matters
2013, Zhao, G., Sanchez, S., Schmidt, O.G., Pumera, M.
Self-propelled catalytic microjets have attracted considerable attention in recent years and these devices have exhibited the ability to move in complex media. The mechanism of propulsion is via the Pt catalysed decomposition of H2O2 and it is understood that the Pt surface is highly susceptible to poisoning by sulphur-containing molecules. Here, we show that important extracellular thiols as well as basic organic molecules can significantly hamper the motion of catalytic microjet engines. This is due to two different mechanisms: (i) molecules such as dimethyl sulfoxide can quench the hydroxyl radicals produced at Pt surfaces and reduce the amount of oxygen gas generated and (ii) molecules containing -SH, -SSR, and -SCH3 moieties can poison the catalytically active platinum surface, inhibiting the motion of the jet engines. It is essential that the presence of such molecules in the environment be taken into consideration for future design and operation of catalytic microjet engines. We show this effect on catalytic micromotors prepared by both rolled-up and electrodeposition approaches, demonstrating that such poisoning is universal for Pt catalyzed micromotors. We believe that our findings will contribute significantly to this field to develop alternative systems or catalysts for self-propulsion when practical applications in the real environment are considered.
Janus particles: from concepts to environmentally friendly materials and sustainable applications
2020, Marschelke, Claudia, Fery, Andreas, Synytska, Alla
Janus particles represent a unique group of patchy particles combining two or more different physical or chemical functionalities at their opposite sides. Especially, individual Janus particles (JPs) with both chemical and geometrical anisotropy as well as their assembled layers provide considerable advantages over the conventional monofunctional particles or surfactant molecules offering (a) a high surface-to-volume ratio; (b) high interfacial activity; (c) target controlling and manipulation of their interfacial activity by external signals such as temperature, light, pH, or ionic strength and achieving switching between stable emulsions and macro-phase separation; (d) recovery and recycling; (e) controlling the mass transport across the interface between the two phases; and finally (f) tunable several functionalities in one particle allowing their use either as carrier materials for immobilized catalytically active substances or, alternatively, their site-selective attachment to substrates keeping another functionality active for further reactions. All these advantages of JPs make them exclusive materials for application in (bio-)catalysis and (bio-)sensing. Considering “green chemistry” aspects covering biogenic materials based on either natural or fully synthetic biocompatible and biodegradable polymers for the design of JPs may solve the problem of toxicity of some existing materials and open new paths for the development of more environmentally friendly and sustainable materials in the very near future. Considering the number of contributions published each year on the topic of Janus particles in general, the number of contributions regarding their environmentally friendly and sustainable applications is by far smaller. This certainly pinpoints an important challenge and is addressed in this review article. The first part of the review focuses on the synthesis of sustainable biogenic or biocompatible Janus particles, as well as strategies for their recovery, recycling, and reusability. The second part addresses recent advances in applications of biogenic/biocompatible and non-biocompatible JPs in environmental and biotechnological fields such as sensing of hazardous pollutants, water decontamination, and hydrogen production. Finally, we provide implications for the rational design of environmentally friendly and sustainable materials based on Janus particles. [Figure not available: see fulltext.]. © 2020, The Author(s).
Short- and long-term polystyrene nano- and microplastic exposure promotes oxidative stress and divergently affects skin cell architecture and Wnt/beta-catenin signaling
2023, Schmidt, Anke, da Silva Brito, Walison Augusto, Singer, Debora, Mühl, Melissa, Berner, Julia, Saadati, Fariba, Wolff, Christina, Miebach, Lea, Wende, Kristian, Bekeschus, Sander
Nano- and microplastic particles (NMP) are strong environmental contaminants affecting marine ecosystems and human health. The negligible use of biodegradable plastics and the lack of knowledge about plastic uptake, accumulation, and functional consequences led us to investigate the short- and long-term effects in freshly isolated skin cells from mice. Using fluorescent NMP of several sizes (200 nm to 6 µm), efficient cellular uptake was observed, causing, however, only minor acute toxicity as metabolic activity and apoptosis data suggested, albeit changes in intracellular reactive species and thiol levels were observed. The internalized NMP induced an altered expression of various targets of the nuclear factor-2-related transcription factor 2 pathway and were accompanied by changed antioxidant and oxidative stress signaling responses, as suggested by altered heme oxygenase 1 and glutathione peroxide 2 levels. A highly increased beta-catenin expression under acute but not chronic NMP exposure was concomitant with a strong translocation from membrane to the nucleus and subsequent transcription activation of Wnt signaling target genes after both single-dose and chronic long-term NMP exposure. Moreover, fibroblast-to-myofibroblast transdifferentiation accompanied by an increase of α smooth muscle actin and collagen expression was observed. Together with several NMP-induced changes in junctional and adherence protein expression, our study for the first time elucidates the acute and chronic effects of NMP of different sizes in primary skin cells' signaling and functional biology, contributing to a better understanding of nano- and microplastic to health risks in higher vertebrates.
The effects of heat stress on the behaviour of dairy cows – a review
2021-5-8, Herbut, Piotr, Hoffmann, Gundula, Angrecka, Sabina, Godyń, Dorota, Vieira, Frederico Márcio Corrêa, Adamczyk, Krzysztof, Kupczyński, Robert
Heat stress in livestock is a function of macro- A nd microclimatic factors, their duration and intensity, the environments where they occur and the biological characteristics of the animal. Due to intense metabolic processes, high-producing dairy cows are highly vulnerable to the effects of heat stress. Disturbances in their thermoregulatory capability are reflected by behavioural, physiological and production changes. Expression of thermoregulatory behaviour such as reduction of activity and feed intake, searching for cooler places or disturbances in reproductive behaviours may be very important indicators of animal welfare. Especially maintenance of standing or lying position in dairy cattle may be a valuable marker of the negative environmental impact. Highly mechanized farms with large numbers of animals have the informatic system that can detect alterations automatically, while small family farms cannot afford this type of equipment. Therefore, observing and analysing behavioural changes to achieve a greater understanding of heat stress issue may be a key factor for developing the effective strategies to minimize the effects of heat stress in cattle. The aim of this review is to present the state of knowledge, over the last years, regarding behavioural changes in dairy cows (Bos taurus) exposed to heat stress conditions and discuss some herd management strategies providing mitigation of the overheat consequences.
Consequences of nano and microplastic exposure in rodent models: the known and unknown
2022, da Silva Brito, Walison Augusto, Mutter, Fiona, Wende, Kristian, Cecchini, Alessandra Lourenco, Schmidt, Anke, Bekeschus, Sander
The ubiquitous nature of micro- (MP) and nanoplastics (NP) is a growing environmental concern. However, their potential impact on human health remains unknown. Research increasingly focused on using rodent models to understand the effects of exposure to individual plastic polymers. In vivo data showed critical exposure effects depending on particle size, polymer, shape, charge, concentration, and exposure routes. Those effects included local inflammation, oxidative stress, and metabolic disruption, leading to gastrointestinal toxicity, hepatotoxicity, reproduction disorders, and neurotoxic effects. This review distillates the current knowledge regarding rodent models exposed to MP and NP with different experimental designs assessing biodistribution, bioaccumulation, and biological responses. Rodents exposed to MP and NP showed particle accumulation in several tissues. Critical responses included local inflammation and oxidative stress, leading to microbiota dysbiosis, metabolic, hepatic, and reproductive disorders, and diseases exacerbation. Most studies used MP and NP commercially provided and doses higher than found in environmental exposure. Hence, standardized sampling techniques and improved characterization of environmental MP and NP are needed and may help in toxicity assessments of relevant particle mixtures, filling knowledge gaps in the literature.
Multi-method evidence for when and how climate-related disasters contribute to armed conflict risk
2020, Ide, Tobias, Brzoska, Michael, Donges, Jonathan F., Schleussner, Carl-Friedrich
Climate-related disasters are among the most societally disruptive impacts of anthropogenic climate change. Their potential impact on the risk of armed conflict is heavily debated in the context of the security implications of climate change. Yet, evidence for such climate-conflict-disaster links remains limited and contested. One reason for this is that existing studies do not triangulate insights from different methods and pay little attention to relevant context factors and especially causal pathways. By combining statistical approaches with systematic evidence from QCA and qualitative case studies in an innovative multi-method research design, we show that climate-related disasters increase the risk of armed conflict onset. This link is highly context-dependent and we find that countries with large populations, political exclusion of ethnic groups, and a low level of human development are particularly vulnerable. For such countries, almost one third of all conflict onsets over the 1980-2016 period have been preceded by a disaster within 7 days. The robustness of the effect is reduced for longer time spans. Case study evidence points to improved opportunity structures for armed groups rather than aggravated grievances as the main mechanism connecting disasters and conflict onset. © 2020 The Authors