Search Results
Contactless processing of SiGe-melts in EML under reduced gravity
2016, Luo, Yuansu, Damaschke, Bernd, Schneider, Stephan, Lohöfer, Georg, Abrosimov, Nikolay, Czupalla, Matthias, Samwer, Konrad
The processing of semiconductors based on electromagnetic levitation is a challenge, because this kind of materials shows a poor electrical conductivity. Here, we report the results of measurements of the thermophysical properties obtained recently from highly doped semiconductors Si1-x Ge x under microgravity conditions in the framework of parabola flight campaigns. Due to the limited time of about 20 s of microgravity especially Ge-rich samples with low melting temperatures were investigated. The measurements were performed contactlessly by video techniques with subsequent digital image processing. Linear and volume thermal expansion coefficients were measured hereby from image data. An anomaly of volume changes near the solidus temperature is visible. Viscosity and surface tension were determined by the oscillating drop technique using optic and electronic data. It was observed that the alloying of Si into Ge increases the surface tension of the melts. The viscosity is following an Arrhenius equation and shows a crossover temperature which separates simple liquid at high temperatures from cooperative liquid at low temperatures.
Thin-film models for viscoelastic liquid bi-layers
2015, Jachalski, Sebastian, Münch, Andreas, Wagner, Barbara
In this work we consider a two-layer system of viscoelastic liquids of corotational Jeffreys type dewetting from a Newtonian liquid substrates. We derive conditions that allow for the first time the asymptotically consistent reduction of the free boundary problem for the two-layer system to a system of coupled thin-film equations that incorporate the full nonlinear viscoelastic rheology. We show that these conditions are controlled by the order of magnitude of the viscosity ratio of the liquid layers and their thickness ratio. For pure Newtonian flow, these conditions lead to a thin-film model that couples a layer with a parabolic flow field to a layer described by elongational flow. For this system we establish asymptotic regimes that relate the viscosity ratio to a corresponding apparent slip. We then use numerical simulations to discuss the characteristic morphological and dynamical properties of viscoelastic films of corotational Jeffreys type dewetting from a solid as well as liquid substrate.
Maximally dissipative solutions for incompressible fluid dynamics
2021, Lasarzik, Robert
We introduce the new concept of maximally dissipative solutions for a general class of isothermal GENERIC systems. Under certain assumptions, we show that maximally dissipative solutions are well-posed as long as the bigger class of dissipative solutions is non-empty. Applying this result to the Navier–Stokes and Euler equations, we infer global well-posedness of maximally dissipative solutions for these systems. The concept of maximally dissipative solutions coincides with the concept of weak solutions as long as the weak solutions inherits enough regularity to be unique.
Impact of interfacial slip on the stability of liquid two-layer polymer films
2012, Jachalski, Sebastian, Peschka, Dirk, Münch, Andreas, Wagner, Barbara
In this study systems of coupled thin-film models for two immiscible liquid polymer layers on a solid substrate that account for interfacial slip and intermolecular forces are derived. On the scale of tens to hundred nanometers such two-layer systems are susceptable to instability and may rupture and dewet. The stability of the two-layer system and its significant dependence on the order of magnitude of slip is investigated via these thin-film models. With no-slip at both, the liquid-liquid and liquid-solid interface and polymer layers of comparable thickness, the dispersion relation typically shows two local maxima, one in the long-wave regime and the other at moderate wavenumbers. The former is associated with perturbations that mainly affect the gas-liquid interface and the latter with higher relative perturbation amplitudes at the liquid-liquid interface. Slip at the liquid-liquid interface generally favors the former perturbations. However, when the liquid-liquid and the liquidsolid interface exhibit large slip, the maxima shift to small wavenumbers for increasing slip and hence may significantly change the spinodal patterns.
Nano-inspired fluidic interactivity for boiling heat transfer: Impact and criteria
2016, Kim, Beom Seok, Choi, Geehong, Shin, Sangwoo, Gemming, Thomas, Cho, Hyung Hee
The enhancement of boiling heat transfer, the most powerful energy-transferring technology, will lead to milestones in the development of high-efficiency, next-generation energy systems. Perceiving nano-inspired interface functionalities from their rough morphologies, we demonstrate interface-induced liquid refreshing is essential to improve heat transfer by intrinsically avoiding Leidenfrost phenomenon. High liquid accessibility of hemi-wicking and catalytic nucleation, triggered by the morphological and hydrodynamic peculiarities of nano-inspired interfaces, contribute to the critical heat flux (CHF) and the heat transfer coefficient (HTC). Our experiments show CHF is a function of universal hydrodynamic characteristics involving interfacial liquid accessibility and HTC is improved with a higher probability of smaller nuclei with less superheat. Considering the interface-induced and bulk liquid accessibility at boiling, we discuss functionalizing the interactivity between an interface and a counteracting fluid seeking to create a novel interface, a so-called smart interface, for a breakthrough in boiling and its pragmatic application in energy systems.
Impact of energy dissipation on interface shapes and on rates for dewetting from liquid substrates
2018, Peschka, Dirk, Bommer, Stefan, Jachalski, Sebastian, Seemann, Ralf, Wagner, Barbara
We revisit the fundamental problem of liquid-liquid dewetting and perform a detailed comparison of theoretical predictions based on thin-film models with experimental measurements obtained by atomic force microscopy. Specifically, we consider the dewetting of a liquid polystyrene layer from a liquid polymethyl methacrylate layer, where the thicknesses and the viscosities of both layers are similar. Using experimentally determined system parameters like viscosity and surface tension, an excellent agreement of experimentally and theoretically obtained rim profile shapes are obtained including the liquid-liquid interface and even dewetting rates. Our new energetic approach additionally allows to assess the physical importance of different contributions to the energy-dissipation mechanism, for which we analyze the local flow fields and the local dissipation rates. Using this approach, we explain why dewetting rates for liquid-liquid systems follow no universal power law, despite the fact that experimental velocities are almost constant. This is in contrast to dewetting scenarios on solid substrates and in contrast to previous results for liquid-liquid substrates using heuristic approaches.