Search Results
Numerical modelling of the czochralski growth of β-Ga2O3
2017, Miller, Wolfram, Böttcher, Klaus, Galazka, Zbigniew, Schreuer, Jürgen
Our numerical modelling of the Czochralski growth of single crystalline β-Ga2O3 crystals (monoclinic symmetry) starts at the 2D heat transport analysis within the crystal growth furnace, proceeds with the 3D heat transport and fluid flow analysis in the crystal-melt-crucible arrangement and targets the 3D thermal stress analysis within the β-Ga2O3 crystal. In order to perform the stress analysis, we measured the thermal expansion coefficients and the elastic stiffness coefficients in two samples of a β-Ga2O3 crystal grown at IKZ. Additionally, we analyse published data of β-Ga2O3 material properties and use data from literature for comparative calculations. The computations were performed by the software packages CrysMAS, CGsim, Ansys-cfx and comsol Multiphysics. By the hand of two different thermal expansion data sets and two different crystal orientations, we analyse the elastic stresses in terms of the von-Mises stress.
Towards smooth (010) ß-Ga2O3films homoepitaxially grown by plasma assisted molecular beam epitaxy: The impact of substrate offcut and metal-to-oxygen flux ratio
2020, Mazzolini, P., Bierwagen, O.
Smooth interfaces and surfaces are beneficial for most (opto)electronic devices that are based on thin films and their heterostructures. For example, smoother interfaces in (010) ß-Ga2O3/(AlxGa1-x)2O3 heterostructures, whose roughness is ruled by that of the ß-Ga2O3 layer, can enable higher mobility 2-dimensional electron gases by reducing interface roughness scattering. To this end we experimentally prove that a substrate offcut along the [001] direction allows to obtain smooth ß-Ga2O3 layers in (010)-homoepitaxy under metal-rich deposition conditions. Applying In-mediated metal-exchange catalysis (MEXCAT) in molecular beam epitaxy at high substrate temperatures (Tg = 900 °C) we compare the morphology of layers grown on (010)-oriented substrates having different unintentional offcuts. The layer roughness is generally ruled by (i) the presence of (110)-and bar 110-facets visible as elongated features along the [001] direction (rms < 0.5 nm), and (ii) the presence of trenches (5-10 nm deep) orthogonal to [001]. We show that an unintentional substrate offcut of only ˜ 0.1° almost oriented along the [001] direction suppresses these trenches resulting in a smooth morphology with a roughness exclusively determined by the facets, i.e. rms ˜ 0.2 nm. Since we found the facet-and-trench morphology in layer grown by MBE with and without MEXCAT, we propose that the general growth mechanism for (010)-homoepitaxy is ruled by island growth whose coalescence results in the formation of the trenches. The presence of a substrate offcut in the [001] direction can allow for step-flow growth or island nucleation at the step edges, which prevents the formation of trenches. Moreover, we give experimental evidence for a decreasing surface diffusion length or increasing nucleation density on the substrate surface with decreasing metal-to-oxygen flux ratio. Based on our experimental results we can rule-out step bunching as cause of the trench formation as well as a surfactant-effect of indium during MEXCAT. © 2020 The Author(s). Published by IOP Publishing Ltd.
Control of phase formation of (AlxGa1 - X)2O3thin films on c-plane Al2O3
2020, Hassa, Anna, Wouters, Charlotte, Kneiß, Max, Splith, Daniel, Sturm, Chris, von Wenckstern, Holger, Albrecht, Martin, Lorenz, Michael, Grundmann, Marius
In this paper, the growth of orthorhombic and monoclinic (Al x Ga1 - x )2O3 thin films on (00.1) Al2O3 by tin-assisted pulsed laser deposition is investigated as a function of oxygen pressure p(O2) and substrate temperature Tg. For certain growth conditions, defined by Tg = 580°C and p(O2) = 0.016 mbar, the orthorhombic ?-polymorph is stabilized. For Tg = 540°C and p(O2) = 0.016 mbar, the ?-, and the ß-, as well as the spinel ?-polymorph coexist, as illustrated by XRD 2?-?-scans. Further employed growth parameters result in thin films with a monoclinic ß-gallia structure. For all polymorphs, p(O2) and Tg affect the formation and desorption of volatile suboxides, and thereby the growth rate and the cation composition. For example, low oxygen pressures lead to low growth rates and enhanced Al incorporation. This facilitates the structural engineering of polymorphic, ternary (Al,Ga)2O3 via selection of the relevant process parameters. Transmission electron microscopy (TEM) studies of a ? - (Al0.13Ga0.87)2O3 thin film reveal a more complex picture compared to that derived from x-ray diffraction measurements. Furthermore, this study presents the possibility of controlling the phase formation, as well as the Al-content, of thin films based on the choice of their growth conditions. © 2020 The Author(s). Published by IOP Publishing Ltd.