Search Results
Membrane Functionalization in Pilot Scale: Roll‐to‐Roll Electron Beam System with Inline Contact Angle Determination
2021, Schulze, Agnes, Drößler, Lutz, Weiß, Steffen, Went, Marco, Abdul Latif, Amira, Breite, Daniel, Fischer, Kristina
To increase the permeation performance and antifouling properties of polymer membranes, a one-step reaction using electron irradiation was developed. This process combines the surface activation of the membrane polymer and the simultaneous permanent immobilization of hydrophilic molecules. This technology can be applied to various polymers, flat sheet/hollow fiber membranes and all pore ranges. The roll-to-roll system developed for this enables all process steps including inline analysis for quality control of the membrane surface in a continuously operated system. © 2021 The Authors. Chemie Ingenieur Technik published by Wiley-VCH GmbH
Reduction of biofouling of a microfiltration membrane using amide functionalities-Hydrophilization without changes in morphology
2020, Breite, Daniel, Went, Marco, Prager, Andrea, Kühnert, Mathias, Schulze, Agnes
A major goal of membrane science is the improvement of the membrane performance and the reduction of fouling effects, which occur during most aqueous filtration applications. Increasing the surface hydrophilicity can improve the membrane performance (in case of aqueous media) and decelerates membrane fouling. In this study, a PES microfiltration membrane (14,600 L m−2 h−1 bar−1) was hydrophilized using a hydrophilic surface coating based on amide functionalities, converting the hydrophobic membrane surface (water contact angle, WCA: ~90°) into an extremely hydrophilic one (WCA: ~30°). The amide layer was created by first immobilizing piperazine to the membrane surface via electron beam irradiation. Subsequently, a reaction with 1,3,5-benzenetricarbonyl trichloride (TMC) was applied to generate an amide structure. The presented approach resulted in a hydrophilic membrane surface, while maintaining permeance of the membrane without pore blocking. All membranes were investigated regarding their permeance, porosity, average pore size, morphology (SEM), chemical composition (XPS), and wettability. Soxhlet extraction was carried out to demonstrate the stability of the applied coating. The improvement of the modified membranes was demonstrated using dead-end filtration of algae solutions. After three fouling cycles, about 60% of the initial permeance remain for the modified membranes, while only ~25% remain for the reference.
Charge Separating Microfiltration Membrane with pH-Dependent Selectivity
2018-12-20, Breite, Daniel, Went, Marco, Prager, Andrea, Kuehnert, Mathias, Schulze, Agnes
Membrane filters are designed for selective separation of components from a mixture. While separation by size might be the most common approach, other characteristics like charge can also be used for separation as presented in this study. Here, a polyether sulfone membrane was modified to create a zwitterionic surface. Depending on the pH value of the surrounding solution the membrane surface will be either negatively or positively charged. Thus, the charged state can be easily adjusted even by small changes of the pH value of the solution. Charged polystyrene beads were used as model reagent to investigate the pH dependent selectivity of the membrane. It was found that electrostatic forces are dominating the interactions between polystyrene beads and membrane surface during the filtration. This enables a complete control of the membrane’s selectivity according to the electrostatic interactions. Furthermore, differently charged beads marked with fluorescent dyes were used to investigate the selectivity of mixtures of charged components. These different components were successfully separated according to their charged state proving the selectivity of the invented membrane.
Bio-Inspired Polymer Membrane Surface Cleaning
2017-3-9, Schulze, Agnes, Breite, Daniel, Kim, Yongkyum, Schmidt, Martin, Thomas, Isabell, Went, Marco, Fischer, Kristina, Prager, Andrea
To generate polyethersulfone membranes with a biocatalytically active surface, pancreatin was covalently immobilized. Pancreatin is a mixture of digestive enzymes such as protease, lipase, and amylase. The resulting membranes exhibit self-cleaning properties after “switching on” the respective enzyme by adjusting pH and temperature. Thus, the membrane surface can actively degrade a fouling layer on its surface and regain initial permeability. Fouling tests with solutions of protein, oil, and mixtures of both, were performed, and the membrane’s ability to self-clean the fouled surface was characterized. Membrane characterization was conducted by investigation of the immobilized enzyme concentration, enzyme activity, water permeation flux, fouling tests, porosimetry, X-ray photoelectron spectroscopy, and scanning electron microscopy.