Optimizing the detection, ablation, and ion extraction efficiency of a single-particle laser ablation mass spectrometer for application in environments with low aerosol particle concentrations

dc.bibliographicCitation.firstPage5923eng
dc.bibliographicCitation.issue11eng
dc.bibliographicCitation.lastPage5953eng
dc.bibliographicCitation.volume13eng
dc.contributor.authorClemen, Hans-Christian
dc.contributor.authorSchneider, Johannes
dc.contributor.authorKlimach, Thomas
dc.contributor.authorHelleis, Frank
dc.contributor.authorKöllner, Franziska
dc.contributor.authorHünig, Andreas
dc.contributor.authorRubach, Florian
dc.contributor.authorMertes, Stephan
dc.contributor.authorWex, Heike
dc.contributor.authorStratmann, Frank
dc.contributor.authorWelti, André
dc.contributor.authorKohl, Rebecca
dc.contributor.authorFrank, Fabian
dc.contributor.authorBorrmann, Stephan
dc.date.accessioned2021-10-15T07:36:41Z
dc.date.available2021-10-15T07:36:41Z
dc.date.issued2020
dc.description.abstractThe aim of this study is to show how a newly developed aerodynamic lens system (ALS), a delayed ion extraction (DIE), and better electric shielding improve the efficiency of the Aircraft-based Laser ABlation Aerosol MAss spectrometer (ALABAMA). These improvements are applicable to single-particle laser ablation mass spectrometers in general. To characterize the modifications, extensive sizeresolved measurements with spherical polystyrene latex particles (PSL; 150-6000 nm) and cubic sodium chloride particles (NaCl; 400-1700 nm) were performed. Measurements at a fixed ALS position show an improved detectable particle size range of the new ALS compared to the previously used Liu-type ALS, especially for supermicron particles. At a lens pressure of 2.4 hPa, the new ALS achieves a PSL particle size range from 230 to 3240 nm with 50% detection efficiency and between 350 and 2000 nm with 95% detection efficiency. The particle beam divergence was determined by measuring the detection efficiency at variable ALS positions along the laser cross sections and found to be minimal for PSL at about 800 nm. Compared to measurements by singleparticle mass spectrometry (SPMS) instruments using Liutype ALSs, the minimum particle beam divergence is shifted towards larger particle sizes. However, there are no disadvantages compared to the Liu-type lenses for particle sizes down to 200 nm. Improvements achieved by using the DIE and an additional electric shielding could be evaluated by size-resolved measurements of the hit rate, which is the ratio of laser pulses yielding a detectable amount of ions to the total number of emitted laser pulses. In particular, the hit rate for multiply charged particles smaller than 500 nm is significantly improved by preventing an undesired deflection of these particles in the ion extraction field. Moreover, it was found that by using the DIE the ion yield of the ablation, ionization, and ion extraction process could be increased, resulting in up to 7 times higher signal intensities of the cation spectra. The enhanced ion yield results in a larger effective width of the ablation laser beam, which in turn leads to a hit rate of almost 100% for PSL particles in the size range from 350 to 2000 nm. Regarding cubic NaCl particles the modifications of the ALABAMA result in an up to 2 times increased detection efficiency and an up to 5 times increased hit rate. The need for such instrument modifications arises in particular for measurements of particles that are present in low number concentrations such as ice-nucleating particles (INPs) in general, but also aerosol particles at high altitudes or in pristine environments. Especially for these low particle number concentrations, improved efficiencies help to overcome the statistical limitations of single-particle mass spectrometer measurements. As an example, laboratory INP measurements carried out in this study show that the appli- cation of the DIE alone increases the number of INP mass spectra per time unit by a factor of 2 to 3 for the sampled substances. Overall, the combination of instrument modifications presented here resulted in an increased measurement efficiency of the ALABAMA for different particle types and particles shape as well as for highly charged particles. © 2020 Copernicus GmbH. All rights reserved.eng
dc.description.versionpublishedVersioneng
dc.identifier.urihttps://oa.tib.eu/renate/handle/123456789/6988
dc.identifier.urihttps://doi.org/10.34657/6035
dc.language.isoengeng
dc.publisherKatlenburg-Lindau : Copernicuseng
dc.relation.doihttps://doi.org/10.5194/amt-13-5923-2020
dc.relation.essn1867-8548
dc.relation.ispartofseriesAtmospheric measurement techniques : AMT 13 (2020), Nr. 11eng
dc.relation.issn1867-1381
dc.rights.licenseCC BY 4.0 Unportedeng
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/eng
dc.subjectaerosoleng
dc.subjectchemical propertyeng
dc.subjectconcentration (composition)eng
dc.subjectdetection methodeng
dc.subjectinstrumentationeng
dc.subjectmass spectrometryeng
dc.subjectmeasurement methodeng
dc.subject.ddc550eng
dc.titleOptimizing the detection, ablation, and ion extraction efficiency of a single-particle laser ablation mass spectrometer for application in environments with low aerosol particle concentrationseng
dc.typearticleeng
dc.typeTexteng
dcterms.bibliographicCitation.journalTitleAtmospheric measurement techniques : AMTeng
tib.accessRightsopenAccesseng
wgl.contributorTROPOSeng
wgl.subjectGeowissenschafteneng
wgl.typeZeitschriftenartikeleng
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
Optimizing the detection, ablation, and ion extraction efficiency of a single-particle laser ablation mass spectrometer for application in environments with low aerosol particle concentrations.pdf
Size:
5.46 MB
Format:
Adobe Portable Document Format
Description: