13 results
Search Results
Now showing 1 - 10 of 13
- ItemEnvironmental Effects over the First 2½ Rotation Periods of a Fertilised Poplar Short Rotation Coppice(New York, NY : Springer, 2017-12-7) Kern, Jürgen; Germer, Sonja; Ammon, Christian; Balasus, Antje; Bischoff, Wolf-Anno; Schwarz, Andreas; Forstreuter, Manfred; Kaupenjohann, MartinA short rotation coppice (SRC) with poplar was established in a randomised fertilisation experiment on sandy loam soil in Potsdam (Northeast Germany). The main objective of this study was to assess if negative environmental effects as nitrogen leaching and greenhouse gas emissions are enhanced by mineral nitrogen (N) fertiliser applied to poplar at rates of 0, 50 and 75 kg N ha−1 year−1 and how these effects are influenced by tree age with increasing number of rotation periods and cycles of organic matter decomposition and tree growth after each harvesting event. Between 2008 and 2012, the leaching of nitrate (NO3 −) was monitored with self-integrating accumulators over 6-month periods and the emissions of the greenhouse gases (GHG) nitrous oxide (N2O) and carbon dioxide (CO2) were determined in closed gas chambers. During the first 4 years of the poplar SRC, most nitrogen was lost through NO3 − leaching from the main root zone; however, there was no significant relationship to the rate of N fertilisation. On average, 5.8 kg N ha−1 year−1 (13.0 kg CO2equ) was leached from the root zone. Nitrogen leaching rates decreased in the course of the 4-year study parallel to an increase of the fine root biomass and the degree of mycorrhization. In contrast to N leaching, the loss of nitrogen by N2O emissions from the soil was very low with an average of 0.61 kg N ha−1 year−1 (182 kg CO2equ) and were also not affected by N fertilisation over the whole study period. Real CO2 emissions from the poplar soil were two orders of magnitude higher ranging between 15,122 and 19,091 kg CO2 ha−1 year−1 and followed the rotation period with enhanced emission rates in the years of harvest. As key-factors for NO3 − leaching and N2O emissions, the time after planting and after harvest and the rotation period have been identified by a mixed effects model. © 2017, The Author(s).
- ItemEffect of two cooling frequencies on respiration rate in lactating dairy cows under hot and humid climate conditions(Warsaw : De Gruyter Open, 2019) Pinto, Severino; Hoffmann, Gundula; Ammon, Christian; Heuwieser, Wolfgang; Levit, Harel; Halachmi, Ilan; Amon, ThomasThe aim of this study was to evaluate the effects of evaporative cooling at two different frequen-cies per day on the respiration rate (rr) of lactating dairy cows, considering cow-related factors. twenty multiparous israeli holstein dairy cows housed in a naturally ventilated cowshed were di-vided randomly into two treatment groups. the cows of both groups were exposed to 3 or 8 cooling sessions per day (3xcool vs. 8xcool, respectively). the rr was observed hourly, with a maximum of 12 measurements per day. Body posture (standing vs. lying) was simultaneously documented. milk yield was recorded daily. coat color was determined from a digital photograph. the rr of standing and lying cows was lower in the 8xcool group (60.2 and 51.6 breaths per min (bpm), re-spectively) than in the 3xcool group (73.1 and 65.6 bpm, respectively). For each increment of five kilograms of milk produced, rr increased by one bpm, and the rr of cows in early days in milk (dim) was 12.3 bpm higher than that of cows in late dim. in conclusion, eight cooling sessions per day instead of three lead to a rr abatement in heat-stressed cows under hot conditions, and cow-related factors directly impact the rr during heat stress assessment
- ItemComparative study of behavioural and milking traits in cows milked with a conventional or individual quarter milking system (Multilactor®) and with different milking persons(Warsaw : De Gruyter Open, 2017-4-28) Hoffmann, Gundula; Liermann, Wendy; Ammon, Christian; Rose-Meierhöfer, SandraThe aim of this study was to investigate the influence of a new type of milking system on the behaviour of cows during milking by comparing a conventional milking system (CON) with an individual quarter milking system (MUL), MultiLactor®. Sixty-eight dairy cows were observed during their milking times (32 cows in CON, 36 cows in MUL) using video recordings to analyse their behavioural traits. The udder preparation duration, milking duration and milk yield were also evaluated. No significant differences were found between the CON and the MUL regarding cows' head posture (P=0.38), body posture (P=0.85), number of steps (P=0.08) and number of kicks (P=0.56). However, the milk yield was lower (P=0.02), just as the udder preparation duration (P<0.01) and milking duration (P=0.01) were shorter in the CON compared to the MUL. In addition, in regard to the milking person, differences were displayed in the head posture of the milked cows, kick-off or loss of teat cup or milking cluster, and frequency of udder preparation. In conclusion, the investigated milking systems did not markedly influence the behaviour of dairy cows; however, udder preparation duration, milking duration and milk yield were significantly greater for the MUL than for the CON. However, the milking person appears to have a greater impact on the behaviour of the cows than the milking system. © 2017 Sciendo. All Rights Reserved.
- ItemFunctional relationship of particulate matter (PM) emissions, animal species, and moisture content during manure application(Amsterdam [u.a.] : Elsevier Science, 2020) Kabelitz, Tina; Ammon, Christian; Funk, Roger; Münch, Steffen; Biniasch, Oliver; Nübel, Ulrich; Thiel, Nadine; Rösler, Uwe; Siller, Paul; Amon, Barbara; Aarnink, André J.A.; Amon, ThomasLivestock manure is recycled to agricultural land as organic fertilizer. Due to the extensive usage of antibiotics in conventional animal farming, antibiotic-resistant bacteria are highly prevalent in feces and manure. The spread of wind-driven particulate matter (PM) with potentially associated harmful bacteria through manure application may pose a threat to environmental and human health. We studied whether PM was aerosolized during the application of solid and dried livestock manure and the functional relationship between PM release, manure dry matter content (DM), treatment and animal species. In parallel, manure and resulting PM were investigated for the survival of pathogenic and antibiotic-resistant bacterial species. The results showed that from manure with a higher DM smaller particles were generated and more PM was emitted. A positive correlation between manure DM and PM aerosolization rate was observed. There was a species-dependent critical dryness level (poultry: 60% DM, pig: 80% DM) where manure began to release PM into the environment. The maximum PM emission potentials were 1 and 3 kg t−1 of applied poultry and pig manure, respectively. Dried manure and resulting PM contained strongly reduced amounts of investigated pathogenic and antibiotic-resistant microorganisms compared to fresh samples. An optimal manure DM regarding low PM emissions and reduced pathogen viability was defined from our results, which was 55–70% DM for poultry manure and 75–85% DM for pig manure. The novel findings of this study increase our detailed understanding and basic knowledge on manure PM emissions and enable optimization of manure management, aiming a manure DM that reduces PM emissions and pathogenic release into the environment.
- ItemInfluence of Processing Parameters on Fibre Properties during Twin-Screw Extrusion of Poplar Wood Chips(Basel : MDPI, 2022) Dittrich, Christian; Pecenka, Ralf; Selge, Benjamin; Ammon, Christian; Kruggel-Emden, HaraldFor sustainable agriculture, the contentious input of peat in growing media needs to be replaced by a substitute with the best possible water-holding capacity (WHC). Wood from fast growing poplar trees, cultivated in short rotation coppices (SRC), is a suitable alternative if it is processed correctly in a twin-screw extruder. The processing parameters, such as the aperture setting of the extruder, moisture content, and specific energy demand (SED), during twin-screw extrusion, as well as their influence on fibre properties such as WHC and particle size distribution, are investigated. SRC-poplar wood chips from clone Max3 are the raw material used for this research. As a result, the best volume-based WHC (75%) at −1 kPa suction tension was achieved for dry extruded wood chip fibre at an aperture setting of 15 mm and an SED of 340 kWh*t−1. The smallest SED of 140 kWh*t−1 was measured at apertures of 35 mm and 40 mm, which resulted in a volume-based WHC of approximately 30% and a dry matter mass flow during processing of 0.289 t*h−1 (40 mm). The particle size distribution of semi-dry wood chips has the highest fine fraction as well as the smallest coarse fraction. Conclusively, poplar wood can be processed fresh and dry into fibre at an acceptable SED, which results in an acceptable WHC.
- ItemCalculation of ventilation rates and ammonia emissions : Comparison of sampling strategies for a naturally ventilated dairy barn(San Diego, Calif. : Academ. Press, 2020) Janke, David; Willink, Dylia; Ammon, Christian; Hempel, Sabrina; Schrade, Sabine; Demeyer, Peter; Hartung, Eberhard; Amon, Barbara; Ogink, Nico; Amon, ThomasEmissions and ventilation rates (VRs) in naturally ventilated dairy barns (NVDBs) are usually measured using indirect methods, where the choice of inside and outside sampling locations (i.e. sampling strategy) is crucial. The goal of this study was to quantify the influence of the sampling strategy on the estimation of emissions and VRs. We equipped a NVDB in northern Germany with an extensive measuring setup capable of measuring emissions under all wind conditions. Ammonia (NH3) and carbon dioxide (CO2) concentrations were measured with two Fourier-transform infrared spectrometers. Hourly values for ventilation rates and emissions for ammonia over a period of nearly a year were derived using the CO2 balance method and five different sampling strategies for the acquisition of indoor and outdoor concentrations were applied. When comparing the strategy estimating the highest emission level to the strategy estimating the lowest, the differences in NH3 emissions in winter, transition, and summer season were +26%, +19% and +11%, respectively. For the ventilation rates, the differences were +80%, +94%, and 63% for the winter, transition and summer season, respectively. By accommodating inside/outside concentration measurements around the entire perimeter of the barn instead of a reduced part of the perimeter (aligned to a presumed main wind direction), the amount of available data substantially increased for around 210% for the same monitoring period.
- ItemEvaluating the potential of dietary crude protein manipulation in reducing ammonia emissions from cattle and pig manure: A meta-analysis(Dordrecht [u.a.] : Springer Science + Business Media B.V, 2017-11-22) Sajeev, Erangu Purath Mohankumar; Amon, Barbara; Ammon, Christian; Zollitsch, Werner; Winiwarter, WilfriedDietary manipulation of animal diets by reducing crude protein (CP) intake is a strategic NH3 abatement option as it reduces the overall nitrogen input at the very beginning of the manure management chain. This study presents a comprehensive meta-analysis of scientific literature on NH3 reductions following a reduction of CP in cattle and pig diets. Results indicate higher mean NH3 reductions of 17 ± 6% per %-point CP reduction for cattle as compared to 11 ± 6% for pigs. Variability in NH3 emission reduction estimates reported for different manure management stages and pig categories did not indicate a significant influence. Statistically significant relationships exist between CP reduction, NH3 emissions and total ammoniacal nitrogen content in manure for both pigs and cattle, with cattle revealing higher NH3 reductions and a clearer trend in relationships. This is attributed to the greater attention given to feed optimization in pigs relative to cattle and also due to the specific physiology of ruminants to efficiently recycle nitrogen in situations of low protein intake. The higher NH3 reductions in cattle highlights the opportunity to extend concepts of feed optimization from pigs and poultry to cattle production systems to further reduce NH3 emissions from livestock manure. The results presented help to accurately quantify the effects of NH3 abatement following reduced CP levels in animal diets distinguishing between animal types and other physiological factors. This is useful in the development of emission factors associated with reduced CP as an NH3 abatement option. © 2017, The Author(s).
- ItemThe Use of a Pressure-Indicating Film to Determine the Effect of Liner Type on the Measured Teat Load Caused by a Collapsing Liner(Basel : MDPI, 2017-4-13) Demba, Susanne; Paul, Viktoria; Ammon, Christian; Rose-Meierhöfer, SandraDuring milking the teat cup liner is the interface between the teat of a dairy cow and the milking system, so it should be very well adapted to the teat. Therefore, the aim of the present study was to determine the effect of liner type on the directly measuring teat load caused by a collapsing liner with a pressure-indicating film. The Extreme Low pressure-indicating film was used to detect the effect of six different liners on teat load. For each liner, six positions in the teat cup were specified, and six repetitions were performed for each position with a new piece of film each time. Analysis of variance was performed to detect differences between the six liners, the positions within a liner, and the measuring areas. The pressure applied to the teat by a liner depends on the technical characteristics of the liner, especially the shape of the barrel, and for all tested liners, a higher teat load was found at the teat end. In conclusion, with the help of pressure-indicating film, it is possible to determine the different effects of liner type by directly measuring teat load due to liner collapse. © 2017 by the authors. Licensee MDPI, Basel, Switzerland.
- ItemThe usability of a pressure-indicating film to measure the teat load caused by a collapsing liner(Basel : MDPI, 2016) Demba, Susanne; Sabrina, Sabrina; Ammon, Christian; Rose-Meierhöfer, SandraPrevention of damage to the teat and mastitis requires determination of the teat load caused by a collapsing liner. The aim of this study was to test a pressure-indicating film designed to measure the pressure between a collapsing liner and artificial teats. The Ultra Super Low and the Extreme Low pressure-indicating films were tested on two types of artificial teat. The experiments were performed with a conventional milking cluster equipped with round silicone liners. For each teat and film type, 30 repetitions were performed. Each repetition was performed with a new piece of film. Kruskal-Wallis tests were performed to detect differences between the pressure values for the different teats. The area of regions where pressure-indication color developed was calculated to determine the most suitable film type. Both film types measured the pressure applied to both artificial teats by the teat cup liner. Thus, the pressure-indicating films can be used to measure the pressure between a collapsing liner and an artificial teat. Based on the results of the present investigation, a pressure-indicating film with the measurement ranges of both film types combined would be an optimal tool to measure the overall pressure between an artificial teat and a collapsing liner.
- ItemMethane Emission Characteristics of Naturally Ventilated Cattle Buildings(Basel : MDPI AG, 2020) Hempel, Sabrina; Willink, Diliara; Janke, David; Ammon, Christian; Amon, Barbara; Amon, ThomasThe mandate to limit global temperature rise calls for a reliable quantification of gaseous pollutant emissions as a basis for effective mitigation. Methane emissions from ruminant fermentation are of particular relevance in the context of greenhouse gas mitigation. The emission dynamics are so far insufficiently understood. We analyzed hourly methane emission data collected during contrasting seasons from two naturally ventilated dairy cattle buildings with concrete floor and performed a second order polynomial regression. We found a parabolic temperature dependence of the methane emissions irrespective of the measurement site and setup. The position of the parabola vertex varied when considering different hours of the day. The circadian rhythm of methane emissions was represented by the pattern of the fitted values of the constant term of the polynomial and could be well explained by feeding management and air flow conditions. We found barn specific emission minima at ambient temperatures around 10 °C to 15 °C. As this identified temperature optimum coincides with the welfare temperature of dairy cows, we concluded that temperature regulation of dairy cow buildings with concrete floor should be considered and further investigated as an emission mitigation measure. Our results further indicated that empirical modeling of methane emissions from the considered type of buildings with a second order polynomial for the independent variable air temperature can increase the accuracy of predicted long-term emission values for regions with pronounced seasonal temperature fluctuations