3 results
Search Results
Now showing 1 - 3 of 3
- ItemInvestigation of the Effects of Torrefaction Temperature and Residence Time on the Fuel Quality of Corncobs in a Fixed-Bed Reactor(Basel : MDPI, 2022) Orisaleye, Joseph I.; Jekayinfa, Simeon O.; Pecenka, Ralf; Ogundare, Adebayo A.; Akinseloyin, Michael O.; Fadipe, Opeyemi L.Biomass from agriculture is a promising alternative fuel due to its carbon-neutral feature. However, raw biomass does not have properties required for its direct utilization for energy generation. Torrefaction is considered as a pretreatment method to improve the properties of biomass for energy applications. This study was aimed at investigating the effects of torrefaction temperature and residence time on some physical and chemical properties of torrefied corncobs. Therefore, a fixed-bed torrefaction reactor was developed and used in the torrefaction of corncobs. The torrefaction process parameters investigated were the torrefaction temperature (200, 240, and 280 °C) and the residence time (30, 60, and 90 min). The effects of these parameters on the mass loss, grindability, chemical composition, and calorific value of biomass were investigated. It was shown that the mass loss increased with increasing torrefaction temperature and residence time. The grinding throughput of the biomass was improved by increasing both the torrefaction temperature and the residence time. Torrefaction at higher temperatures and longer residence times had greater effects on the reduction in particle size of the milled corncobs. The calorific value was highest at a torrefaction temperature of 280 °C and a residence time of 90 min. The energy yield for all treatments ranged between 92.8 and 99.2%. The results obtained in this study could be useful in the operation and design of torrefaction reactors. They also provided insight into parameters to be investigated for optimization of the torrefaction reactor.
- ItemStorage problems of poplar chips from short rotation plantations with special emphasis on fungal development(Warsaw : Sciendo, 2012) Horváth, Zsuzsanna; Marosvölgyi, Béla; Idler, Christine; Pecenka, Ralf; Lenz, HannesThere are several problems in storing wood chips freshly harvested from short rotation plantations, which result in quality losses as well as in dry matter and energy losses. The factors influencing the degradation of raw material are examined in this paper with special focus on fungal development. An excessive growth of fungi is connected to dry matter losses and also to an increased health risk during raw material handling. The following factors were measured during 6 months storage of poplar wood chips depending on particle size: box temperature, moisture content, pH-value, appearance of fungi in the storage and the concentration of fungal particles in the air. The results show a close connection between particle size, temperature and attack of fungi. During the storage mesophilic and termophilic species of the genera Alternaria, Aspergillus, Cladosporium, Mucor and Penicillium appeared. The concentration of fungal particles is the highest for fine chips and decreases in bigger particles. There was a special focus on the investigation of the properties of coarse chips (G 50), which represent a good compromise between handling, storage losses and health risk due to fungal development.
- ItemEffects of Feeding Speed and Temperature on Properties of Briquettes from Poplar Wood Using a Hydraulic Briquetting Press(Basel : MDPI, 2023) Orisaleye, Joseph I.; Jekayinfa, Simeon O.; Dittrich, Christian; Obi, Okey F.; Pecenka, RalfBiomass has a high potential to contribute towards resolving the energy deficit. Processing biomass into solid fuels enhances its use in various bioenergy conversion technologies. The quality of densified biomass depends on several variables. The investigation of the effect of densification parameters on briquette quality is necessary for process optimization. This study investigates the influence of die temperature (100, 120, 140 °C) and feeding speed (2.4, 2.9, 3.3 mm s−1) on the quality of briquettes produced from poplar using a hydraulic biomass briquetting machine. The density of the briquettes ranged between 746.7 and 916.8 kg m−3, the mechanical durability ranged from 97.4 to 98.4%, and the water resistance index was between 91.6 and 96.1%. The results show that the temperature was statistically significant (p < 0.05) on the density, mechanical durability and water resistance of biomass briquettes. The feeding speed was statistically significant (p < 0.05) on the density and water resistance. The interaction of temperature and feeding speed was statistically significant (p < 0.05) on all properties considered. The results obtained in this study are useful for optimizing the quality of briquettes produced using the hydraulic piston press.