Search Results

Now showing 1 - 9 of 9
  • Item
    Grain-size distribution dataset of supercritical flow sediments from a Gilbert-type delta that are associated with disaggregation bands
    (Amsterdam [u.a.] : Elsevier, 2022) Tanner, David C.; Brandes, Christian; Winsemann, Jutta
    This is a dataset of grain-size distribution in sub- and supercritical flow sediments of a Gilbert-type delta from an outcrop in North Germany. Thirteen samples of ca 2.5 kg were dried (at 105°C), and homogenised twice with a sample divider. A representative sample of 1-2 g was then analysed using laser diffraction. The grain-size distribution of the sand has a maximum between fine to medium sand, with a long fine fraction tail down to 0.06 µm and occasional coarse fractions (up to 1.5 mm) in some samples. Specific grain-size distributions correlate with the different sedimentary bedforms from which the samples were taken. This data is important for two reasons: Firstly, sedimentary structures formed by Froude supercritical flows are controlled by grain-size. However, few studies have provided grain-size datasets from the natural record, which often have a much wider grain-size distribution than experimentally-produced supercritical flow deposits. Secondly, the sands were deformed subsequently by disaggregation bands, a type of geological fault that only develops in porous granular materials, i.e. well-sorted, medium sand. The disaggregation bands are indicative of seismic or even aseismic, creeping movement of basement faults.
  • Item
    S-wave experiments for the exploration of a deep geothermal carbonate reservoir in the German Molasse Basin
    (Berlin ; Heidelberg [u.a.] : SpringerOpen, 2021) Wawerzinek, Britta; Buness, Hermann; von Hartmann, Hartwig; Tanner, David C.
    There are many successful geothermal projects that exploit the Upper Jurassic aquifer at 2–3 km depth in the German Molasse Basin. However, up to now, only P-wave seismic exploration has been carried out. In an experiment in the Greater Munich area, we recorded S-waves that were generated by the conventional P-wave seismic survey, using 3C receivers. From this, we built a 3D volume of P- to S-converted (PS) waves using the asymptotic conversion point approach. By combining the P-volume and the resulting PS-seismic volume, we were able to derive the spatial distribution of the vp/vs ratio of both the Molasse overburden and the Upper Jurassic reservoir. We found that the vp/vs ratios for the Molasse units range from 2.0 to 2.3 with a median of 2.15, which is much higher than previously assumed. This raises the depth of hypocenters of induced earthquakes in surrounding geothermal wells. The vp/vs ratios found in the Upper Jurassic vary laterally between 1.5 and 2.2. Since no boreholes are available for verification, we test our results against an independently derived facies classification of the conventional 3D seismic volume and found it correlates well. Furthermore, we see that low vp/vs ratios correlate with high vp and vs velocities. We interpret the latter as dolomitized rocks, which are connected with enhanced permeability in the reservoir. We conclude that 3C registration of conventional P-wave surveys is worthwhile.
  • Item
    High‐resolution reflection seismics reveal the structure and the evolution of the Quaternary glacial Tannwald Basin
    (Oxford : Wiley, 2018) Burschil, Thomas; Buness, Hermann; Tanner, David C.; Wielandt‐Schuster, Ulrike; Ellwanger, Dietrich; Gabriel, Gerald
    Over-deepened basins exist throughout the Alpine realm. Improving our knowledge on these basins is of high social relevance, since these areas are often well-populated and they possess, for instance, unusual hydrological settings. Nonetheless, geophysical and sedimentological investigations of over-deepened basins are rare. We analyse the sedimentary succession of such a basin, the Tannwald Basin, through geological interpretation of seismic reflection profiles. The basin is located approximately 60 km north of the European Alps. It was incised into Tertiary molasse sediments by the Rhine Glacier and later filled by glacial, fluvial, and lacustrine deposits of 250 m thickness. The Leibniz Institute for Applied Geophysics acquired a grid of five high-resolution seismic reflection lines that imaged till the deepest parts of the Tannwald Basin. The seismic profiles, processed to a pre-stack depth migration level, allow a detailed geological interpretation that is calibrated with the help of a nearby borehole. We determine the structure and the seismic facies of the sediment succession in the basin and presume the following hypothesis of the evolution of the basin: sub-glacial erosion comprises the excavation of the over-deepened basin as well as detachment of large fragments of molasse material. These molasse slabs were deposited within the basin in a layer of basal till that graded upwards in water-lain till and fine-grained deposits. During the last two glaciations, the basinal structure became buried by till sequences and glacio-fluvial sediments.
  • Item
    Evaluation of deep crustal earthquakes in northern Germany - Possible tectonic causes
    (Oxford [u.a.] : Wiley-Blackwell, 2019) Brandes, Christian; Plenefisch, Thomas; Tanner, David C.; Gestermann, Nicolai; Steffen, Holger
    We present new evidence for seven deep crustal, intraplate earthquakes in northern Germany, a region regarded as an area of low seismicity. From 2000 to 2018, seven earthquakes with magnitudes of ML 1.3–3.1, were detected at depths of 17.0–31.4 km. By placing the earthquake hypocentres in a geological three-dimensional model, we can correlate two of the earthquakes with the Thor Suture, a major fault zone in this area. Five of the earthquakes group in the lower crust near the Moho, which implies that parts of the lower crust and the crust/mantle boundary in northern Germany act as a structural discontinuity on which deformation localizes. Numerical simulation implies that stress changes due to glacial isostatic adjustment most likely triggered these deep crustal earthquakes.
  • Item
    A numerical sensitivity study of how permeability, porosity, geological structure, and hydraulic gradient control the lifetime of a geothermal reservoir
    (Göttingen : Copernicus Publ., 2019) Bauer, Johanna F.; Krumbholz, Michael; Luijendijk, Elco; Tanner, David C.
    Geothermal energy is an important and sustainable resource that has more potential than is currently utilized. Whether or not a deep geothermal resource can be exploited, mostly depends on, besides temperature, the utilizable reservoir volume over time, which in turn largely depends on petrophysical parameters. We show, using over 1000 (n=1027) 4-D finite-element models of a simple geothermal doublet, that the lifetime of a reservoir is a complex function of its geological parameters, their heterogeneity, and the background hydraulic gradient (BHG). In our models, we test the effects of porosity, permeability, and BHG in an isotropic medium. Furthermore, we simulate the effect of permeability contrast and anisotropy induced by layering, fractures, and a fault. We quantify the lifetime of the reservoir by measuring the time to thermal breakthrough, i.e. how many years pass before the temperature of the produced fluid falls below the 100 ∘C threshold. The results of our sensitivity study attest to the positive effect of high porosity; however, high permeability and BHG can combine to outperform the former. Particular configurations of all the parameters can cause either early thermal breakthrough or extreme longevity of the reservoir. For example, the presence of high-permeability fractures, e.g. in a fault damage zone, can provide initially high yields, but it channels fluid flow and therefore dramatically restricts the exploitable reservoir volume. We demonstrate that the magnitude and orientation of the BHG, provided permeability is sufficiently high, are the prime parameters that affect the lifetime of a reservoir. Our numerical experiments show also that BHGs (low and high) can be outperformed by comparatively small variations in permeability contrast (103) and fracture-induced permeability anisotropy (101) that thus strongly affect the performance of geothermal reservoirs.
  • Item
    Multiphase, decoupled faulting in the southern German Molasse Basin – evidence from 3-D seismic data
    (Göttingen : Copernicus Publ., 2020) Shipilin, Vladimir; Tanner, David C.; von Hartmann, Hartwig; Moeck, Inga
    We use three-dimensional seismic reflection data from the southern German Molasse Basin to investigate the structural style and evolution of a geometrically decoupled fault network in close proximity to the Alpine deformation front. We recognise two fault arrays that are vertically separated by a clay-rich layer – lower normal faults and upper normal and reverse faults. A frontal thrust fault partially overprints the upper fault array. Analysis of seismic stratigraphy, syn-kinematic strata, throw distribution, and spatial relationships between faults suggest a multiphase fault evolution: (1) initiation of the lower normal faults in the Upper Jurassic carbonate platform during the early Oligocene, (2) development of the upper normal faults in the Cenozoic sediments during the late Oligocene, and (3) reverse reactivation of the upper normal faults and thrusting during the mid-Miocene. These distinct phases document the evolution of the stress field as the Alpine orogen propagated across the foreland. We postulate that interplay between the horizontal compression and vertical stresses due to the syn-sedimentary loading resulted in the intermittent normal faulting. The vertical stress gradients within the flexed foredeep defined the independent development of the upper faults above the lower faults, whereas mechanical behaviour of the clay-rich layer precluded the subsequent linkage of the fault arrays. The thrust fault must have been facilitated by the reverse reactivation of the upper normal faults, as its maximum displacement and extent correlate with the occurrence of these faults. We conclude that the evolving tectonic stresses were the primary mechanism of fault activation, whereas the mechanical stratigraphy and pre-existing structures locally governed the structural style.
  • Item
    Visualisation and analysis of shear-deformation bands in unconsolidated Pleistocene sand using ground-penetrating radar: Implications for paleoseismological studies
    (Amsterdam [u.a.] : Elsevier, 2018) Brandes, Christian; Igel, Jan; Loewer, Markus; Tanner, David C.; Lang, Jörg; Müller, Katharina; Winsemann, Jutta
    Deformation bands in unconsolidated sediments are of great value for paleoseismological studies in sedimentary archives. Using ground-penetrating radar (GPR), we investigated an array of shear-deformation bands that developed in unconsolidated Pleistocene glacifluvial Gilbert-type delta sediments. A dense grid (spacing 0.6 m) of GPR profiles was measured on top of a 20 m-long outcrop that exposes shear-deformation bands. Features in the radargrams could be directly tied to the exposure. The shear-deformation bands are partly represented by inclined reflectors and partly by the offset of reflections at delta clinoforms. 3-D interpretation of the 2-D radar sections shows that the bands have near-planar geometries that can be traced throughout the entire sediment volume. Thin sections of sediment samples show that the analysed shear-deformation bands have a denser grain packing than the host sediment. Thus they have a lower porosity and smaller pore sizes and therefore, in the vadose zone, the deformation bands have a higher water content due to enhanced capillary forces. This, together with the partially-developed weak calcite cementation and the distinct offset along the bands, are likely the main reasons for the clear and unambiguous expression of the shear-deformation bands in the radar survey. The study shows that deformation-band arrays can clearly be detected using GPR and quickly mapped over larger sediment volumes. With the 3-D analysis, it is further possible to derive the orientation and geometry of the bands. This allows correlation of the bands with the regional fault trend. Studying deformation bands in unconsolidated sediments with GPR is therefore a powerful approach in paleoseismological studies. Based on our data, we postulate that the outcrop is part of a dextral strike-slip zone that was reactivated by glacial isostatic adjustment.
  • Item
    Seismic interpretation and structural restoration of the Heligoland glaciotectonic thrust-fault complex: Implications for multiple deformation during (pre-)Elsterian to Warthian ice advances into the southern North Sea Basin
    (Amsterdam [u.a.] : Elsevier, 2020) Winsemann, Jutta; Koopmann, Hannes; Tanner, David C.; Lutz, Rüdiger; Lang, Jörg; Brandes, Christian; Gaedicke, Christoph
    Despite a long history of research, the locations of former ice-margins in the North Sea Basin are still uncertain. In this study, we present new palaeogeographic reconstructions of (pre-) Elsterian and Warthian ice-margins in the southeastern North Sea Basin, which were previously unknown. The reconstructions are based on the integration of palaeo-ice flow data derived from glaciotectonic thrusts, tunnel valleys and mega-scale glacial lineations. We focus on a huge glaciotectonic thrust complex located about 10 km north of Heligoland and 50 km west of the North Frisian coast of Schleswig-Holstein (Northern Germany). Multi-channel high-resolution 2D seismic reflection data show a thrust-fault complex in the upper 300 ms TWT (ca. 240 m) of seismic data. This thrust-fault complex consists of mainly Neogene delta sediments, covers an area of 350 km2, and forms part of a large belt of glaciotectonic complexes that stretches from offshore Denmark via northern Germany to Poland. The deformation front of the Heligoland glaciotectonic complex trends approximately NNE-SSW. The total length of the glaciotectonic thrust complex is approximately 15 km. The thrust faults share a common detachment surface, located at a depth of 250–300 ms (TWT) (200–240 m) below sea level. The detachment surface most probably formed at a pronounced rheological boundary between Upper Miocene fine-grained pro-delta deposits and coarser-grained delta-front deposits, although we cannot rule out that deep permafrost in the glacier foreland played a role for the location of this detachment surface. Restored cross-sections reveal the shortening of the complex along the detachment to have been on average 23% (ranging from ca. 16%–50%). The determined ice movement direction from east-southeast to southeast suggests deformation by an ice advance from the Baltic region. The chronospatial relationship of the thrust-fault complex and adjacent northwest-southeast to northeast-southwest trending Elsterian tunnel valleys implies a pre-Elsterian (MIS 16?) age of the glaciotectonic complex. However, the age of these Elsterian tunnel valleys is poorly constrained and the glaciotectonic complex of Heligoland may also have been formed during an early Elsterian ice advance into the southeastern North Sea Basin. The glaciotectonic complex underwent further shortening and the Elsterian tunnel-valley fills that were incised into the glaciotectonic complex were partly deformed during the Saalian Drenthe and Warthe (1) ice advances.
  • Item
    Unravelling the shape and stratigraphy of a glacially-overdeepened valley with reflection seismic: the Lienz Basin (Austria)
    (Basel : Birkhäuser, 2019) Burschil, Thomas; Tanner, David C.; Reitner, Jürgen M.; Buness, Hermann; Gabriel, Gerald
    We reveal the subsurface bedrock topography and sedimentary succession of one of the deepest glacially-formed basins in the Eastern Alps: the Lienz Basin in the Upper Drau Valley (Tyrol), by means of seismic reflection. A dense source-receiver spacing, supplied by autonomous receivers, and a prestack depth-migration processing scheme were essential to distinguish the various deposits in fine detail, such as slumping, fan delta deposits, and a modified monocline on the basin flank. These details support our interpretation of the seismic stratigraphy that consists of, e.g., subglacial till of last glacial maximum (LGM) age and possibly older, laminated basin fines, and gravel/coarse sand. The maximum depth of the basin is 622 m, at the junction of two major basement faults that are not clearly visible in the seismic reflections. We regard the overdeepening in this longitudinal valley as the result of glacier confluence during the LGM. Subglacial meltwaters utilized the higher erodibility of faulted rocks, as indicated by channel structures. The adverse slope (2.6%) along the valley axis exceeds the gradient ice-surface slope (0.4–0.5%) during the LGM by more than fivefold. We thus suggest this feature is a product of a pre-LGM phase, since adverse slopes greater than ~ 1.2 times the ice surface slope promote the freezing of water in subglacial channels and prevent efficient water flushing of sediments. Integrating other studies allows us to estimate the local overdeepening of the Lienz Basin and that of the whole Upper Drau Valley to be 146 m and 530 m, respectively. At the beginning of lacustrine sedimentation, we estimate the paleo-water depth to be at least 216 m.