Search Results
Tris(tetrahydrofuran-kO)tris[tris(thio-phen-2-yl)methanolato-kO]terbium(III)tetrahydrofuran monosolvate
2011, Veith, Michael, Belot, Celine, Huch, Volker
In the mononuclear title compound, [Tb(C13H9OS3)3(C4H8O)3]·C4H8O, the lanthanide cation is located on a threefold rotation axis and is surrounded by electron-rich ligands in an approximately octahedral geometry. One of the thienyl groups and the bound THF are disordered with 0.5:0.5 occupancy. The free THF is disordered around the threefold axis.
A novel precursor system and its application to produce tin doped indium oxide
2011, Veith, Michael, Bubel, Carsten, Zimmer, Michael
A new type of precursor has been developed by molecular design and synthesised to produce tin doped indium oxide (ITO). The precursor consists of a newly developed bimetallic indium tin alkoxide, Me2In(OtBu)3Sn (Me = CH3, OtBu = OC(CH3)3), which is in equilibrium with an excess of Me2In(OtBu). This quasi single-source precursor is applied in a sol–gel process to produce powders and coatings of ITO using a one-step heat treatment process under an inert atmosphere. The main advantage of this system is the simple heat treatment that leads to the disproportionation of the bivalent Sn(II) precursor into Sn(IV) and metallic tin, resulting in an overall reduced state of the metal in the final tin doped indium oxide (ITO) material, hence avoiding the usually necessary reduction step. Solid state 119Sn-NMR measurements of powder samples confirm the appearance of Sn(II) in an amorphous gel state and of metallic tin after annealing under nitrogen. The corresponding preparation of ITO coatings by spin coating on glass leads to transparent conductive layers with a high transmittance of visible light and a low electrical resistivity without the necessity of a reduction step.
Micro-/nanostructured alumina as model surface to study topography effects on cell-surface interactions
2011, Aktas, Cenk, Martinez Miró, Martina, Lee, Juseok, Brück, Stefan, Veith, Michael
[no abstract available]
A new approach for a slurry based coating system for the prevention of high-temperature oxidation
2010, Aslan, Mesut, Wittmar, Matthias, Bolz, Henning, Veith, Michael
[no abstract available]
Transparent conductive oxides for coating applications
2009, Quilitz, Mario, Oliveira, Peter W. de, Heusing, Sabine, Veith, Michael
Transparent, conductive oxides (TCOs) applied as coatings find multiple applications in various areas such as flat panel display setups, as electrodes in touch-screen panels, electrochromic devices, solar cells and in architectural applications for example as IR reflectors. The favored material in the class of TCOs is still ITO - Sn-doped In2O3 - due to its unique combination of high transparency and electrical conductivity. Though already very good, the potential of the ITO coatings with regard to their conductivity leaves some space for future improvements. Also ITO as a material has some serious drawbacks, such as limited availability and high costs. this work presents some stratgies to overcome these obstacles. One way to enhance the conductivities of alternative materials is to use carbon nanotubes as a dopant. This strategy was tested for ATO (Antimony-doped Tin Oxide), Titan dioxide and AZO (Aluminium-doped Zinc oxide). The results for these materials are presented. In coatings of ITO on glass or polymeric foils usually silica-based binders are used. They have the disadvantage to reduce the contact between the highly conducting grains and thus reduce overall conductivity in the composite. The matrix between the nanoparticles can be improved by several measures. Experiments with relevance in this direction are discussed. A third strategy aims at the reduction of costs in the process of ITO fabrication. Here one way to go is to use an electrochemical synthesis method. Results of the line of development are presented. Other strategies comprise the suitable processing of materials with a lower intrinsic conductivity or the search for materials with high intrinsic conductivity close to that of ITO. Exmples are presented and discussed.
Novel single-source precursors for the fabrication of PbTiO3, PbZrO3 and Pb(Zr1-x Tix)O3 thin-films by chemical vapor deposition
2011, Veith, Michael, Bender, Michael, Lehnert, Tobias, Zimmer, Michael, Jakob, Anette
Lead titanate, lead zirconate, and lead zirconate titanate (PZT) films in the sub-μm-range were produced at temperatures around 400 °C using novel single-source precursors in a classical thermal CVD process. The design of two bimetallic alkoxide compounds, a lead titanate and a lead zirconate source with almost identical physical properties and complement miscibility, resulted in a new quasi-single-source PZT precursor, an azeotropic mixture that evaporates at 30 °C and at a pressure of 4 × 10−1 mbar. After thermal treatment at 650 °C, transparent (100)-oriented PZT films with remnant polarization of 20 μC cm−2 and a coercive field strength of 20 V μm−1 were achieved. An additional lead source is not required.
PTFEP-Al2O3 hybrid nanowires reducing thrombosis and biofouling
2019, Haidar, Ayman, Ali, Awadelkareem A., Veziroglu, Salih, Fiutowski, Jacek, Eichler, Hermann, Müller, Isabelle, Kiefer, Karin, Faupel, Franz, Bischoff, Markus, Veith, Michael, Aktas, Oral Cenk, Abdul-Khaliq, Hashim
Thrombosis and bacterial infection are major problems in cardiovascular implants. Here we demonstrated that a superhydrophobic surface composed of poly(bis(2,2,2-trifluoroethoxy)phosphazene) (PTFEP)-Al2O3 hybrid nanowires (NWs) is effective to reduce both platelet adhesion/activation and bacterial adherence/colonization. The proposed approach allows surface modification of cardiovascular implants which have 3D complex geometries. © 2019 The Royal Society of Chemistry.
Large area production of optical coatings and devices by the sol-gel process
2009, Oliveira, Peter, Quilitz, Mario, Heusing, Sabine, Lin, Hechun, Veith, Michael
[no abstract available]
Bi-phasic nanostructures for functional applications
2012, Veith, Michael, Lee, Juseok, Miro, Marina Martinez, Akkan, C. Kaan, Dufloux, Cecile, Aktas, O. Cenk
Biphasic solid state composites of the type metal/metal oxide or element/element oxide can be synthesized in one pot chemical reactions using so called molecular "single source precursors". Due to their singular genesis these composites show peculiar hetero-structures based on core-shell hierarchies such as superlattices and composite nanospheres or nanowires. They exhibit superior or new functional properties compared to their individual constituent compounds. In the current work, we review in particular the synthetical and mechanistical approach of bi-phasic (Al/Al2O3) nanostructures such as nanospheres, nanowires and nanoloops using a single source precursor. Other bi-phasic materials of the general formula M/MOx (for example M = Ge, Sn, Pb) are addressed for comparison. The impact of different synthetical conditions as well as of modification of surfaces by laser techniques and their technological relevance are presented briefly. Additionally, functional applications of the prepared surfaces are explained with some outstanding case studies. These case studies are primarily concerned with their use as biomaterials and their application in medicine as well as with their use as thin films for optics and functional surfaces.
Microstructure investigation of reflective coatings interference multilayers produced by sol-gel method
2007, Jilavi, Mohammad H., Sam, Ebru D., Werner, Ulf, Oliveira, Peter W. de, Veith, Michael
[no abstract available]
- «
- 1 (current)
- 2
- 3
- »