11 results
Search Results
Now showing 1 - 10 of 11
- ItemRhodium-catalyzed borylative carbon monoxide reduction to gem-diborylmethane(Amsterdam [u.a.] : Elsevier, 2021) Xua, Jian-Xing; Wu, Fu-Peng; Wu, Xiao-FengHerein, we developed a rhodium-catalyzed reduction of CO with bis(pinacolato)diboron (B2pin2) under atmospheric pressure of CO with silane as the hydride source, gem-diborylmethane [H2C(Bpin)2] as a versatile and fundamental C1 compound can be formed. Notably, this is the first example on transition metal-catalyzed borylation of CO. © 2020 The Author(s)
- ItemIn situ grown palladium nanoparticles on polyester fabric as easy-separable and recyclable catalyst for Suzuki-Miyaura reaction(Amsterdam : Elsevier, 2021) Xu, Tiefeng; Lu, Panting; Wohlrab, Sebastian; Chen, Wenxing; Springer, Armin; Wu, Xiao-Feng; Lu, WangyangPalladium nanoparticles supported on low-melting polyester (Pd/LMPET) fabric were prepared through a microwave irradiation assisted method. In this way, in situ growth of Pd nanoparticles onto an easy to handle material was initiated and proceeded. The results of the characterization revealed that the palladium nanoparticles were well-dispersed on the surfaces of the polyester fibers. The Pd/LMPET fabrics were then employed in the Suzuki-Miyaura coupling. They exhibited excellent catalytic activity in ethanol/water under air atmosphere at 50 °C. Importantly, the Pd/LMPET fabrics could be separated from reaction mixture conveniently and they can still maintain good activity after 8 cycles without Pd leaching. © 2021 The Authors
- ItemAerobic iron-catalyzed site-selective C(sp3)–C(sp3) bond cleavage in N-heterocycles(Amsterdam : Elsevier, 2021) Leonard, David K.; Li, Wu; Rockstroh, Nils; Junge, Kathrin; Beller, MatthiasThe kinetic and thermodynamic stability of C(sp3)–C(sp3) bonds makes the site-selective activation of these motifs a real synthetic challenge. In view of this, herein a site-selective method of C(sp3)–C(sp3) bond scission of amines, specifically morpholine and piperazine derivatives, using a cheap iron catalyst and air as a sustainable oxidant is reported. Furthermore, a statistical design of experiments (DoE) is used to evaluate multiple reaction parameters thereby allowing for the rapid development of a catalytic process. © 2021
- ItemNickel-catalyzed carbonylative synthesis of dihydrobenzofurans(Amsterdam : Elsevier, 2021) Geng, H.-Q.; Wang, W.; Wu, X.-F.A nickel-catalyzed carbonylative synthesis of dihydrobenzofurans has been developed. With Mo(CO)6 as the CO source and manganese metal as the reductant, alkyl halides were reacted with aryl iodides to give the desired products in moderate to good yields. © 2020 Elsevier B.V.
- ItemVerification of impurity-related photocatalytic activity of insulating oxide supports(Amsterdam : Elsevier, 2021) Kortewille, Bianca; Springer, Armin; Strunk, JenniferPhotocatalysts composed of vanadium oxide species supported on commercial MgO and ZrO2 are investigated in selective methanol oxidation. Both support oxides are insulators, so the vanadium oxide species are expected as sole active component in photocatalysis. However, the pure supports showed considerable activity: Bare MgO was more active than MgO-supported vanadia catalysts, and ZrO2 showed intermediate activity. By various characterization methods, the presence of TiO2 (anatase) in the MgO support, and the presence of Zn, possibly as ZnO, in ZrO2 is demonstrated. The present study highlights that photocatalysts containing commercial supports must be carefully checked for impurity-related photocatalytic performance. © 2021 The Authors
- ItemEnhancement and limits of the selective oxidation of methane to formaldehyde over V-SBA-15: Influence of water cofeed and product decomposition(Amsterdam : Elsevier, 2021) Kunkel, Benny; Wohlrab, SebastianThe possibility of a selective catalytic oxidation of methane to formaldehyde has been known for decades, and positive influences of water added to the reaction mixture and ultra-short contact times have been reported. In the present work, the complexity of interdependencies has been revealed. Specific parameter variations can increase conversion and selectivity of the target product. Surprisingly, formaldehyde formation over VOx species and its decomposition in gas phase were equally dependent on the partial pressure of the added water, so that the sweet spot can only be found by varying the residence time. © 2021 The Author(s)
- ItemHeat accumulation during femtosecond laser treatment at high repetition rate – A morphological, chemical and crystallographic characterization of self-organized structures on Ti6Al4V(Amsterdam : Elsevier, 2021) Schnell, Georg; Lund, Henrik; Bartling, Stephan; Polley, Christian; Riaz, Abdullah; Senz, Volkmar; Springer, Armin; Seitz, HermannThis study presents a detailed characterization of self-organized nano- and microstructures on Ti6Al4V evoked by different scanning strategies and fluences with a 300 fs laser operating at a laser wavelength of 1030 nm. The resulting surface morphology was visualized via field emission scanning electron microscopy (FEG-SEM) images of the surface and cross-sections. X-ray diffraction (XRD)-analysis was performed to analyse changes in crystal structures. The chemical surface composition of the near-surface layer was determined by X-ray photoelectron spectroscopy (XPS). Results show a significant influence of heat accumulation while processing with high laser repetition rates on the formation, crystallinity and chemical composition of self-organized structures depending on the scanning strategy. The ablation with different laser scanning strategies led to varying dynamics of growth-mechanisms of self-organized structures, formation of intermetallic phases (Ti3Al), sub-oxides and oxides (Ti6O, TiO) as well as ions (Ti3+, Ti4+) in surface layer reliant on applied fluence. Furthermore, investigations revealed a heat-affected zone up to several micrometers in non-ablated material. © 2021 The Authors
- ItemRuthenium-Catalyzed Deuteration of Aromatic Carbonyl Compounds with a Catalytic Transient Directing Group(Weinheim : Wiley-VCH, 2021) Kopf, Sara; Ye, Fei; Neumann, Helfried; Beller, MatthiasA novel ruthenium-catalyzed C−H activation methodology for hydrogen isotope exchange of aromatic carbonyl compounds is presented. In the presence of catalytic amounts of specific amine additives, a transient directing group is formed in situ, which directs selective deuteration. A high degree of deuteration is achieved for α-carbonyl and aromatic ortho-positions. In addition, appropriate choice of conditions allows for exclusive labeling of the α-carbonyl position while a procedure for the preparation of merely ortho-deuterated compounds is also reported. This methodology proceeds with good functional group tolerance and can be also applied for deuteration of pharmaceutical drugs. Mechanistic studies reveal a kinetic isotope effect of 2.2, showing that the C−H activation is likely the rate-determining step of the catalytic cycle. Using deuterium oxide as a cheap and convenient source of deuterium, the methodology presents a cost-efficient alternative to state-of-the-art iridium-catalyzed procedures. © 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH
- ItemSupported CuII Single-Ion Catalyst for Total Carbon Utilization of C2 and C3 Biomass-Based Platform Molecules in the N-Formylation of Amines(Weinheim : Wiley-VCH, 2021) Dai, Xingchao; Wang, Xinzhi; Rabeah, Jabor; Kreyenschulte, Carsten; Brückner, Angelika; Shi, FengThe shift from fossil carbon sources to renewable ones is vital for developing sustainable chemical processes to produce valuable chemicals. In this work, value-added formamides were synthesized in good yields by the reaction of amines with C2 and C3 biomass-based platform molecules such as glycolic acid, 1,3-dihydroxyacetone and glyceraldehyde. These feedstocks were selectively converted by catalysts based on Cu-containing zeolite 5A through the in situ formation of carbonyl-containing intermediates. To the best of our knowledge, this is the first example in which all the carbon atoms in biomass-based feedstocks could be amidated to produce formamide. Combined catalyst characterization results revealed preferably single CuII sites on the surface of Cu/5A, some of which form small clusters, but without direct linking via oxygen bridges. By combining the results of electron paramagnetic resonance (EPR) spin-trapping, operando attenuated total reflection (ATR) IR spectroscopy and control experiments, it was found that the formation of formamides might involve a HCOOH-like intermediate and .NHPh radicals, in which the selective formation of .OOH radicals might play a key role. © 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH
- ItemCatalyst Deactivation During Rhodium Complex-Catalyzed Propargylic C-H Activation(Weinheim : Wiley-VCH, 2021) Möller, Saskia; Jannsen, Nora; Rüger, Julia; Drexler, Hans-Joachim; Horstmann, Moritz; Bauer, Felix; Breit, Bernhard; Heller, DetlefDetailed mechanistic investigations on our previously reported synthesis of branched allylic esters by the rhodium complex-catalyzed propargylic C−H activation have been carried out. Based on initial mechanistic studies, we present herein more detailed investigations of the reaction mechanism. For this, various analytical (NMR, X-ray crystal structure analysis, Raman) and kinetic methods were used to characterize the formation of intermediates under the reaction conditions. The knowledge obtained by this was used to further optimize the previous conditions and generate a more active catalytic system. © 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.