69 results
Search Results
Now showing 1 - 10 of 69
- ItemSoft Inkjet Circuits: Rapid Multi-Material Fabrication of Soft Circuits using a Commodity Inkjet Printer(New York City : Association for Computing Machinery, 2019) Khan, Arshad; Roo, Joan Sol; Kraus, Tobias; Steimle, JürgenDespite the increasing popularity of soft interactive devices, their fabrication remains complex and time consuming. We contribute a process for rapid do-it-yourself fabrication of soft circuits using a conventional desktop inkjet printer. It supports inkjet printing of circuits that are stretchable, ultrathin, high resolution, and integrated with a wide variety of materials used for prototyping. We introduce multi-ink functional printing on a desktop printer for realizing multi-material devices, including conductive and isolating inks. We further present DIY techniques to enhance compatibility between inks and substrates and the circuits' elasticity. This enables circuits on a wide set of materials including temporary tattoo paper, textiles, and thermoplastic. Four application cases demonstrate versatile uses for realizing stretchable devices, e-textiles, body-based and re-shapeable interfaces.
- ItemCADEX and beyond: Installation of a new PollyXT site in Dushanbe(Les Ulis : EDP Sciences, 2019) Engelmann, Ronny; Hofer, Julian; Makhmudov, Abduvosit N.; Baars, Holger; Hanbuch, Karsten; Ansmann, Albert; Abdullaev, Sabur F.; Macke, Andreas; Althausen, DietrichDuring the 18-month Central Asian Dust Experiment we conducted continuous lidar measurements at the Physical Technical Institute of the Academy of Sciences of Tajikistan in Dushanbe between 2015 and 2016. Mineral dust plumes from various source regions have been observed and characterized in terms of their occurrence, and their optical and microphysical properties with the Raman lidar PollyXT. Currently a new container-based lidar system is constructed which will be installed for continuous long-term measurements in Dushanbe. © 2019 The Authors, published by EDP Sciences.
- ItemThe regime of Aerosol Optical Depth and Ångström exponent over Central and South Asia(Les Ulis : EDP Sciences, 2019) Floutsi, Athina Avgousta; Korras Carraca, Marios Bruno; Matsoukas, Christos; Hatzianastassiou, Nikos; Biskos, GeorgeCentral and South Asia are regions of particular interest for studying atmospheric aerosols, being among the largest sources of desert dust aerosols globally. In this study we use the newest collection (C061) of MODIS-Aqua aerosol optical depth (AOD) at 550 nm and Ångström exponent (a) at 412/470 nm over the 15-year period between 2002 and 2017, providing the longest analyzed dataset for this region. According to our results, during spring and summer, high aerosol load (AOD up to 1.2) consisting of coarse desert dust particles, as indicated by a values as low as 0.15, is observed over the Taklamakan, Thar and Registan deserts and the region between the Aral and Caspian seas. The dust load is much lower during winter and autumn (lower AOD and higher a values compared to the other seasons). The interannual variation of AOD and a suggests that the dust load exhibits large decreasing trends (AOD slopes down to-0.22, a slopes up to 0.47 decade-1) over the Thar desert and large increasing trends between the Aral and Caspian seas (AOD and a slopes up to 0.23 decade-1 and down to-0.61 decade-1, respectively.) The AOD data are evaluated against AERONET surface-based measurements. Generally, MODIS and AERONET data are in good agreement with a correlation coefficient (R) equal to 0.835. © 2019 The Authors, published by EDP Sciences.
- ItemLidar/radar approach to quantify the dust impact on ice nucleation in mid and high level clouds(Les Ulis : EDP Sciences, 2019) Ansmann, Albert; Mamouri, Rodanthi-Elisavet; Bühl, Johannes; Seifert, Patric; Engelmann, Ronny; Nisantzi, Agyro; Hofer, Julian; Baars, HolgerWe present the first attempt of a closure experiment regarding the relationship between ice nucleating particle concentration (INPC) and ice crystal number concentration (ICNC), solely based on active remote sensing. The approach combines aerosol and cloud observations with polarization lidar, Doppler lidar, and cloud radar. Several field campaigns were conducted on the island of Cyprus in the Eastern Mediterranean from 2015-2018 to study heterogeneous ice formation in altocumulus and cirrus layers embedded in Saharan dust. A case study observed on 10 April 2017 is discussed in this contribution. © 2019 The Authors, published by EDP Sciences.
- ItemFirst results of a model user survey on a micro-scale model data standard(2020) Voss, Vivien; Schlünzen, K.Heinke; Grawe, David; Heydebreck, Daniel; Ganske, AnetteMicro-scale models are important to assess processes in complex domains, for example cities. The most common data standard for atmospheric model output data are the CF-conventions, a data standard for netCDF files, but this standard is not adapted to the model output of micro-scale models. As a part of the project AtMoDat (Atmospheric Model Data) we want to develop a model data standard for obstacle resolving models (ORM), including the additional variables (i.e. building structures, wall temperatures) used by these models. In order to involve the micro-scale modeller community in this process, a web based survey was developed and distributed in the modeller community via conferences and email. With this survey we want to find out which micro-scale ORMs are currently in use, their model specifics (e.g. used grid, coordinate system), and the handling of the model result data. Furthermore, the survey provides the opportunity to include suggestions and ideas, what we should consider in the development of the standard. Between September 2019 and July 2020, the survey was accessed 29 times, but only 12 surveys were completed. The finished surveys refer to eight different models and their corresponding model information. Results show that these different models use different output formats and processing tools, which results in different model result handling routines. The participants suggested to use the netCDF data format and to provide information on model initialization, model settings and model input along with the model output data. This would enable an easier intercomparison between different models and repetition of model simulations. Standardized model output and variable names would also enhance the development of shared routines for the analysis of micro-scale model data and a better findability of the data with search engines. This survey will remain open with regular assessments of contents (i.e. November 2020, May 2021; https://uhh.de/orm-survey).
- ItemVariations of the aerosol chemical composition during Asian dust storm at Dushanbe, Tajikistan(Les Ulis : EDP Sciences, 2019) Fomba, Khanneh Wadinga; Müller, Konrad; Hofer, Julian; Makhmudov, Abduvosit N.; Althausen, Dietrich; Nazarov, Bahron I.; Abdullaev, Sabur F.; Herrmann, HartmutAerosol chemical composition was characterized during the Central Asian Dust Experiment (CADEX) at Dushanbe (Tajikistan). Aerosol samples were collected during a period of 2 months from March to May 2015 using a high volume DIGITEL DHA-80 sampler on quartz fiber filters. The filters were analyzed for their ionic, trace metals as well as organic and elemental carbon (OC/EC) content. The aerosol mass showed strong variation with mass concentration ranging from 18 μg/m3 to 110 μg/m3. The mineral dust concentrations varied between 0.9 μg/m3 and 88 μg/m3. Days of high aerosol mass loadings were dominated by mineral dust, which made up to about 80% of the aerosol mass while organic matter and inorganic ions made up about 70% of the aerosol mass during days of low aerosol mass loadings. The mineral dust composition showed different trace metal signatures in comparison to Saharan dust with higher Ca content and Ca/Fe ratios twice as high as that observed in Saharan dust. Strong influence of anthropogenic activities was observed in the trace metal concentrations with Zn and Pb concentrations ranging from 7 to 197 ng/m3 and 2 to 20 ng/m3, respectively. Mineral dust and anthropogenic activities relating to traffic, combustion as well as metallurgical industrial emissions are identified as the sources of the aerosol during this period. © 2019 The Authors, published by EDP Sciences.
- ItemDust impacts on radiative effects of black carbon aerosol in Central Asia(Les Ulis : EDP Sciences, 2019) Tegen, Ina; Heinold, BerndThe radiative effect of mineral dust and black carbon aerosol are investigated with aerosolclimate model simulations with fixed sea surface temperatures as boundary condition. The semi-direct effects of the absorbing aerosol are assessed as the residual between the total direct radiative effect and the instantaneous direct radiative effect of the aerosol species. For Central Asia the presence of mineral dust aerosol below a black carbon aerosol layer enhances the positive radiative effect of the black carbon aerosol. © 2019 The Authors, published by EDP Sciences.
- ItemMaking the Maturity of Data and Metadata Visible with Datacite DOIs(Washington, DC : ESSOAr, 2020) Kaiser, Amandine; Heydebreck, Daniel; Ganske, Anette; Kraft, AngelinaData maturity describes the degree of the formalisation/standardisation of a data object with respect to FAIRness and quality of the (meta-) data. Therefore, a high (meta-) data maturity increases the reusability of data. Moreover, it is an important topic in data management, which is reflected by a growing number of tools and theories trying to measure it, e.g. the FAIR testing tools assessed by RDA(1) or the NOAA maturity matrix(2). If the results of stewardship tasks cannot be shown directly in the metadata, reusers of data cannot easily recognise which data is easy to reuse. For example, the DataCite Metadata Schema does not provide an explicit property to link/store information on data maturity (e.g. FAIRness or quality of data/metadata). The AtMoDat project (3, Atmospheric Model Data) aims to improve the reusability of published atmospheric model data by scientists, the public sector, companies, and other stakeholders. These data are valuable because they form the basis to understand and predict natural events, including the atmospheric circulation and ultimately the atmospheric and planetary energy budget. As most atmospheric data has been published with DataCite DOIs, it is of high importance that the maturity of the datasets can be easily found in the DOI’s Metadata. Published data from other fields of research would also benefit from easily findable maturity information. Therefore, we developed a Maturity Indicator concept and propose to introduce it as a new property in the DataCite Metadata Schema. This indicator is generic and independent of any scientific discipline and data stewardship tool. Hence, it can be used in a variety of research fields. 1 https://doi.org/10.15497/RDA00034 2 Peng et al., 2015: https://doi.org/10.2481/dsj.14-049 3 www.atmodat.de
- ItemAerosol layer heights above Tajikistan during the CADEX campaign(Les Ulis : EDP Sciences, 2019) Hofer, Julian; Althausen, Dietrich; Abdullaev, Sabur F.; Nazarov, Bakhron I.; Makhmudov, Abduvosit N.; Baars, Holger; Engelmann, Ronny; Ansmann, AlbertMineral dust influences climate and weather by direct and indirect effects. Surrounded by dust sources, Central Asian countries are affected by atmospheric mineral dust on a regular basis. Climate change effects like glacier retreat and desertification are prevalent in Central Asia as well. Therefore, the role of dust in the climate system in Central Asia needs to be clarified and quantified. During the Central Asian Dust EXperiment (CADEX) first lidar observations in Tajikistan were conducted. Long-term vertically resolved aerosol measurements were performed with the multiwavelength polarization Raman lidar PollyXT from March 2015 to August 2016 in Dushanbe, Tajikistan. In this contribution, a climatology of the aerosol layer heights is presented, which was retrieved from the 18-month lidar measurements. Automatic detection based on backscatter coefficient thresholds were used to retrieve the aerosol layer heights and yield similar layer heights as manual layer height determination. The significant aerosol layer height has a maximum in summer and a minimum in winter. The highest layers occurred in spring, but in summer uppermost layer heights above 6 km AGL are frequent, too. © 2019 The Authors, published by EDP Sciences.
- ItemVertical profiles of dust and other aerosol types above a coastal site(Les Ulis : EDP Sciences, 2019) Althausen, Dietrich; Mewes, Silke; Heese, Birgit; Hofer, Julian; Schechner, Yoav; Aides, Amit; Holodovsky, VadimMonthly mean vertical profiles of aerosol type occurrences are determined from multiwavelength Raman and polarization lidar measurements above Haifa, Israel, in 2017. This contribution presents the applied methods and threshold values. The results are discussed for one example, May 2017. This month shows more often large, non-spherical particles in lofted layers than within the planetary boundary layer. Small particles are observed at higher altitudes only when they are observed in lower altitudes, too. © 2019 The Authors, published by EDP Sciences.