350 results
Search Results
Now showing 1 - 10 of 350
- ItemZerstörungskennlinien für Verbundsicherheitsglasscheiben(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2001) Mayrhofer, Christoph; Kranzer, CarolineFür die Bewertung des Tragverhaltens von Bauteilen bei Explosionsereignissen sind sogenannte „Druck-Impuls-Diagramme" erforderlich. Diese geben in Abhängigkeit vom Druck und dem Impuls der Belastung an, für welche Wertepaare Zerstörung eintritt und welchen Belastungswerten das betrachtete Bauteil standhält. Derartige Zerstörungskennlinien sind am Fraunhofer EMI für eine Vielzahl von Werkstoffen entwickelt worden. Den Zerstörungskennlinien liegt das Rechenmodell des Ein-Massen-Schwingers zugrunde. Voraussetzungen für seine Anwendbarkeit sind Biegetragmechanismen, Bruch- bzw. Zerstörungskriterien (z.B. Grenzdurchbiegung) und die Kenntnis des statischen Last-Verformungsverhaltens. Untersuchungen ergaben, daß Verbundsicherheitsglasscheiben die Voraussetzungen für die Erstellung von Zerstörungskennlinien erfüllen. Es wird eine Näherungsmethode zur Erfassung des statischen Tragverformungsverhaltens unter Berücksichtigung von Membranspannungszuständen dargestellt. Am Beispiel anderer Werkstoffe wird die prinzipielle Vorgehensweise erläutert, da für Verbundsicherheitsscheiben bisher noch keine Bruchkriterien zur Verfügung stehen.
- ItemCollaborative study into the analysis of total selenium and selenium valence states in glass - a general method by hydride generation atomic absorption spectrometry and photometry : Report of the International Commission on Glass (ICG) Technical Committee 2 "Chemical Durability and Analysis"(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2000) Guadagnino, Emanuel; Çorumluoğlu, OrhanWhilst the determination of total selenium in glass is of great relevance to environmental purposes, the measurement of the oxidation states of selenium which may arise under different redox conditions may contribute to clarify the mechanisms of colour formation. In the proposed method, the determination of total selenium is carried out by hydride generation atomic absorption spectrometry (HGAAS) on three different glasses covering the range of selenium content between 10 and 130 mg/kg of glass. To prevent losses during the decomposition step, selenium is converted into a nonvolatile form as selenate (Se6+). When the sample is decomposed, the HCl Solution (c(HC1) = 10 mol/l) is made and selenium is pre-reduced to Se4+ by heating for 2 h at 80 °C. The determination of selenium oxidation states requires a stepwise approach. The measurement of Se0 is based on its insolubility in HF. After the sample is decomposed, Se0 is filtered off, dissolved from the filter with a HBr-Br2 mixture and finally measured by HGAAS. Se4+ and Se6+ are recovered in the filtrate of the same sample and determined together after conversion of Se4+ into Se6+. Se4+ is determined in the same filtrate by photometry with o-phenylenediamine (OPDA).
- ItemStudy of surface changes on industrial glasses with AFM, FE-SEM, EDX, SNMS and LM : Part 1. Glass skin and corrosion(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2004) Wang, Chun; Häfner, Wolfgang; Krausch, Georg; Rädlein, Edda; Tratzky, Stephan; Schramm, Manfred; Martinek, Klaus-PeterBy combining different analytieal techniques, including modern high resolution imaging tools such as field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM), new phenomena in the surface, near surface and bulk structure of various industrial glasses (without any cleaning process) have been diseovered. Investigations of soda-lime-silica container glass and lead silicate glass tubings exposed to atmospheric and to dried air are presented. The results of the first part of this paper can be explained with an SiO2 rich skin on the glass, which can protect the glass against the attack of external media. If the skin was mechanically injured, inhomogeneous corrosion products on pm scale grew around the injured site after exposure to humid air for times between days up to one year. Microchannels were formed through the injured site due to restricted ion exchange, followed by a local increase of the pH value and consequently the dissolution of the glass network. Finally some stress in the glass, yielded during manufacture, can be partially released and the cutting behaviour is improved. Faster cooling results in a thinner skin and the ions in the glass are able to migrate to the surface more easily when surrounded by some reactive media. Slower cooling results in thicker skin and wax-like droplets instead of erystallites are formed on the surface at a later stage in humid air. The wax-like droplets can etch the glass skin locally, followed by the growth of inhomogeneous corrosion products similar to the injury induced corrosion. If the fresh glass surface was hot-end treated, the quality of the adjacent coating layer depended strongly on the thickness of the skin.
- ItemInfluence of modifier cations on the radiation-induced effects of metaphosphate glasses(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2003) Ebeling, Polina; Ehrt, Doris; Friedrich, ManfredThe influence of different modifying cations on the radiation-induced defect generation in metaphosphate glasses was studied by optical absorption and electron paramagnetic resonance spectroscopy. For this task, several model glasses were prepared. These were simple metaphosphates of alkaline earths, aluminum and zinc. The synthesized glass samples were irradiated with X-rays and with UV light from an Xe/Hg lamp. The cation-dependent differences in the structure of the phosphate glasses were found to have a great influence on the concentration of some radiation-induced defects and thus on the optical absorption. The influence of the different cations became especially distinct under UV light Irradiation due to the selective interaction of the UV light with the glass samples. Some additional phenomena were observed for the irradiated zinc and magnesium metaphosphate glasses which were not found by the previously undertaken study of complex phosphate glasses.
- ItemIn situ measurement of batch glass during melting(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2004) Raether, Friedrich; Krauß, ManfredΑ novel optical measuring method is described which was used for the density measurement of model samples of glass batch during the melting process. It used a sample volume of some 1000 mm3, which was suffieiently large to suppress single particle effects. Shape changes of batch samples during heating were taken into account by the optical method. Volumetric changes of soda-limesilica glass batch were monitored between room temperature and 1100 °C. Initially a sintering stage was observed showing seif similar reduction in the sample volume. Thereafter, the sample shape approached the equilibrium surface of drops. This was accompanied by a large increase in volume, which was attributed to the formation of gas bubbles within the batch samples. Α strong influence of heating rate and composition on this volume increase was observed.
- ItemCalculations on the dimensioning of plunger cell and feeder head(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2005) Reeßing, Friedrich; Schötz, Eberhard[no abstract available]
- ItemApplication of electrical heating in forehearth channels(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2003) Grössler, JürgenElectrical heating of forehearth channels can be either indirect with radiant heating elements installed above the glass surface, or direct utilizing immersed electrodes. Two types of heating elements are used, made of either silicon carbide or molybdenum disilicide. Electrodes are normally made of molybdenum, but tin oxide is also used, and platinum alloy may be required for some special applications. Direct electrical heating is also used in forehearths to supplement the traditional gas heating, and can provide a significant improvement in the thermal homogeneity of the glass at the end of the channel. Excellent results can also be obtained with full electrical heating. Whatever type of electrical heating is used, the relevant safety standards must be applied.
- ItemPostmortem analyses of salvaged conventional silica bricks from glass production furnaces(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2000) Wereszczak, Andrew; Wang, Hsin; Karakus, Musa; Curtis, Warren; Aume, Victor; VerDow, DennisThe microstructure, phase content, and thermal conductivity of salvaged conventional silica bricks from float glass and TV-panel glass production furnaces were examined as a function of position through the brick, and compared with the original, unaltered brick materials. The silica brick from the float glass furnace was in service for approximately 10 years while that for the TV-panel glass furnace was for approximately 6 1/2 years. The microstructure and phase content in both salvaged bricks showed gradients, from tridymite at the bricks' cold-face ends, to cristobalite at their hot-face end even though both bricks were an initial mixture of tridymite and cristobalite to begin with. The thermal conductivity of both bricks had increased as a consequence of these phase and microstructural changes. Α thermal analysis model predicted that such changes would result in an increase in the bricks' cold-face temperature and heat content during service. The initially-produced temperature gradients and environment caused microstructural changes in the silica brick; however, the cause-and-effect relationship between temperature/environment and microstructural changes in the brick likely became mutually reversible once the microstructural changes initiated and the thermal conductivity of the brick started to change as a consequence.
- ItemDevelopment of organic-inorganic coatings for strength-preserving of glass bottles(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2001) Mennig, Martin; Gier, Andreas; Anschütz, Dieter; Schmidt, HelmutAn amino-epoxy-silane based coating system (GAMAL) for glass surfaces was developed, which can efficiently protect bottles from the damages of a bottling plant. Testing bottles with a ramp pressure tester show an identical value of about (40 ± 4) bar for conventionally hot- and cold-end coated bottles and bottles coated with the developed organic-inorganic composite (GAMAL) system. After already 2 min of wet line-simulation testing, all species of a conventionally coated probe fall short of the critical limit of 16 bar, whereas bottles coated with GAMAL (thickness about 7 µm) show a value of (21 ± 3) bar. Coating is possible by dip and spray applicadon on cold or hot (80 °C) substrates, the coating is cured at 120 °C for 5 to 10 min. Additional functions such as colour or UV protection can be added easily, without reduction of the protection potential. The low content of carbon (about 0.5 g per 1 l soft drink bottle) should not disturb the recycling process of such coated bottles.
- ItemMicrowave-assisted digestion of ceramic frits for boron and lithium determination by inductively coupled plasma spectrometry (ICP-OES)(Offenbach : Verlag der Deutschen Glastechnischen Gesellschaft, 2002) Barba, Antonio; Gazulla, M. Fernanda; Gómez, M. Pilar; Jarque, Juan Carlos; Mestre, SergioBoron and lithium are two elements commonly found in the chemical composition of ceramic frits. They are usually determined by volumetric titration and atomic absorption spectrometry, respectively, after melting the ceramic frit by high-temperature alkaline fusion and dissolving the melt in acid medium. This dissolution procedure is long and tedious, and does not enable determining both elements simultaneously. An alternative ceramic frit dissolution procedure based on microwave-assisted digestion in acid medium has been proposed, which allows jointly determining boron and lithium by inductively coupled plasma-optical emission spectrometry. This procedure is rapid and reproducible, and the results are independent of frit chemical composition.