14 results
Search Results
Now showing 1 - 10 of 14
- ItemGuiding cell adhesion and motility by modulating cross-linking and topographic properties of microgel arrays(San Francisco, California, US : PLOS, 2021) Riegert, Janine; Töpel, Alexander; Schieren, Jana; Coryn, Renee; Dibenedetto, Stella; Braunmiller, Dominik; Zajt, Kamil; Schalla, Carmen; Rütten, Stephan; Zenke, Martin; Pich, Andrij; Sechi, Antonio; Blank, Kerstin G.Biomaterial-driven modulation of cell adhesion and migration is a challenging aspect of tissue engineering. Here, we investigated the impact of surface-bound microgel arrays with variable geometry and adjustable cross-linking properties on cell adhesion and migration. We show that cell migration is inversely correlated with microgel array spacing, whereas directionality increases as array spacing increases. Focal adhesion dynamics is also modulated by microgel topography resulting in less dynamic focal adhesions on surface-bound microgels. Microgels also modulate the motility and adhesion of Sertoli cells used as a model for cell migration and adhesion. Both focal adhesion dynamics and speed are reduced on microgels. Interestingly, Gas2L1, a component of the cytoskeleton that mediates the interaction between microtubules and microfilaments, is dispensable for the regulation of cell adhesion and migration on microgels. Finally, increasing microgel cross-linking causes a clear reduction of focal adhesion turnover in Sertoli cells. These findings not only show that spacing and rigidity of surface-grafted microgels arrays can be effectively used to modulate cell adhesion and motility of diverse cellular systems, but they also form the basis for future developments in the fields of medicine and tissue engineering.
- ItemA New Approach to Harness Probiotics Against Common Bacterial Skin Pathogens: Towards Living Antimicrobials(New York, NY [u.a.] : Springer, 2021) Khalfallah, Ghazi; Gartzen, Rita; Möller, Martin; Heine, Elisabeth; Lütticken, RudolfIn this study, the potential of certain lactic acid bacteria—classified as probiotics and known to be antimicrobially active against pathogens or food-poisoning microorganisms—was evaluated with respect to their activity against bacterial skin pathogens. The aim of the study was to develop a plaster/bandage for the application of inhibitory substances produced by these probiotics when applied to diseased skin. For this purpose, two Streptococcus salivarius strains and one Lactobacillus plantarum were tested for production of antimicrobials (bacteriocin-like substances) active against Gram-positive and Gram-negative pathogens using established methods. A newly designed membrane test ensured that the probiotics produce antimicrobials diffusible through membranes. Target organisms used were Cutibacterium acnes, Staphylococcus aureus, and Pseudomonas aeruginosa. Moreover, the L. plantarum 8P-A3 strain was tested against additional bacteria involved in skin disorders. The Lactobacillales used were active against all potential skin pathogens tested. These probiotics could be enclosed between polymer membranes—one tight, the other permeable for their products, preserved by vacuum drying, and reactivated after at least three months storage. Importantly, the reactivated pads containing the probiotics demonstrated antibacterial activity on agar plates against all pathogens tested. This suggests that the probiotic containing pads may be topically applied for the treatment of skin disorders without the need for a regular antibiotic treatment or as an adjunctive therapy.
- ItemMultimodal and multiscale optical imaging of nanomedicine delivery across the blood-brain barrier upon sonopermeation(Wyoming, NSW : Ivyspring, 2020) May, Jan-Niklas; Golombek, Susanne K.; Baues, Maike; Dasgupta, Anshuman; Drude, Natascha; Rix, Anne; Rommel, Dirk; Stillfried, Saskia von; Appold, Lia; Pola, Robert; Pechar, Michal; van Bloois, Louis; Storm, Gert; Kuehne, Alexander J.C.; Gremse, Felix; Theek, Benjamin; Kiessling, Fabian; Lammers, TwanRationale: The blood-brain barrier (BBB) is a major obstacle for drug delivery to the brain. Sonopermeation, which relies on the combination of ultrasound and microbubbles, has emerged as a powerful tool to permeate the BBB, enabling the extravasation of drugs and drug delivery systems (DDS) to and into the central nervous system (CNS). When aiming to improve the treatment of high medical need brain disorders, it is important to systematically study nanomedicine translocation across the sonopermeated BBB. To this end, we here employed multimodal and multiscale optical imaging to investigate the impact of DDS size on brain accumulation, extravasation and penetration upon sonopermeation. Methods: Two prototypic DDS, i.e. 10 nm-sized pHPMA polymers and 100 nm-sized PEGylated liposomes, were labeled with fluorophores and intravenously injected in healthy CD-1 nude mice. Upon sonopermeation, computed tomography-fluorescence molecular tomography, fluorescence reflectance imaging, fluorescence microscopy, confocal microscopy and stimulated emission depletion nanoscopy were used to study the effect of DDS size on their translocation across the BBB. Results: Sonopermeation treatment enabled safe and efficient opening of the BBB, which was confirmed by staining extravasated endogenous IgG. No micro-hemorrhages, edema and necrosis were detected in H&E stainings. Multimodal and multiscale optical imaging showed that sonopermeation promoted the accumulation of nanocarriers in mouse brains, and that 10 nm-sized polymeric DDS accumulated more strongly and penetrated deeper into the brain than 100 nm-sized liposomes. Conclusions: BBB opening via sonopermeation enables safe and efficient delivery of nanomedicine formulations to and into the brain. When looking at accumulation and penetration (and when neglecting issues such as drug loading capacity and therapeutic efficacy) smaller-sized DDS are found to be more suitable for drug delivery across the BBB than larger-sized DDS. These findings are valuable for better understanding and further developing nanomedicine-based strategies for the treatment of CNS disorders. © The author(s).
- ItemNanomedicine‐boosting icaritin-based immunotherapy of advanced hepatocellular carcinoma(London : BioMed Central, 2022) Lu, Yi; Gao, Yue; Yang, Huan; Hu, Yong; Li, XinTraditional treatments for advanced hepatocellular carcinoma (HCC), such as surgical resection, transplantation, radiofrequency ablation, and chemotherapy are unsatisfactory, and therefore the exploration of powerful therapeutic strategies is urgently needed. Immunotherapy has emerged as a promising strategy for advanced HCC treatment due to its minimal side effects and long-lasting therapeutic memory effects. Recent studies have demonstrated that icaritin could serve as an immunomodulator for effective immunotherapy of advanced HCC. Encouragingly, in 2022, icaritin soft capsules were approved by the National Medical Products Administration (NMPA) of China for the immunotherapy of advanced HCC. However, the therapeutic efficacy of icaritin in clinical practice is impaired by its poor bioavailability and unfavorable in vivo delivery efficiency. Recently, functionalized drug delivery systems including stimuli-responsive nanocarriers, cell membrane-coated nanocarriers, and living cell-nanocarrier systems have been designed to overcome the shortcomings of drugs, including the low bioavailability and limited delivery efficiency as well as side effects. Taken together, the development of icaritin-based nanomedicines is expected to further improve the immunotherapy of advanced HCC. Herein, we compared the different preparation methods for icaritin, interpreted the HCC immune microenvironment and the mechanisms underlying icaritin for treatment of advanced HCC, and discussed both the design of icaritin-based nanomedicines with high icaritin loading and the latest progress in icaritin-based nanomedicines for advanced HCC immunotherapy. Finally, the prospects to promote further clinical translation of icaritin-based nanomedicines for the immunotherapy of advanced HCC were proposed.
- ItemBiocompatible Micron-Scale Silk Fibers Fabricated by Microfluidic Wet Spinning(Weinheim : Wiley-VCH, 2021) Lüken, Arne; Geiger, Matthias; Steinbeck, Lea; Joel, Anna-Christin; Lampert, Angelika; Linkhorst, John; Wessling, MatthiasFor successful material deployment in tissue engineering, the material itself, its mechanical properties, and the microscopic geometry of the product are of particular interest. While silk is a widely applied protein-based tissue engineering material with strong mechanical properties, the size and shape of artificially spun silk fibers are limited by existing processes. This study adjusts a microfluidic spinneret to manufacture micron-sized wet-spun fibers with three different materials enabling diverse geometries for tissue engineering applications. The spinneret is direct laser written (DLW) inside a microfluidic polydimethylsiloxane (PDMS) chip using two-photon lithography, applying a novel surface treatment that enables a tight print-channel sealing. Alginate, polyacrylonitrile, and silk fibers with diameters down to 1 µm are spun, while the spinneret geometry controls the shape of the silk fiber, and the spinning process tailors the mechanical property. Cell-cultivation experiments affirm bio-compatibility and showcase an interplay between the cell-sized fibers and cells. The presented spinning process pushes the boundaries of fiber fabrication toward smaller diameters and more complex shapes with increased surface-to-volume ratio and will substantially contribute to future tailored tissue engineering materials for healthcare applications. © 2021 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH
- ItemHow Much Physical Guidance is Needed to Orient Growing Axons in 3D Hydrogels?(Weinheim : Wiley-VCH, 2020) Rose, Jonas C.; Gehlen, David B.; Omidinia-Anarkoli, Abdolrahman; Fölster, Maaike; Haraszti, Tamás; Jaekel, Esther E.; De Laporte, LauraDirecting cells is essential to organize multi-cellular organisms that are built up from subunits executing specific tasks. This guidance requires a precisely controlled symphony of biochemical, mechanical, and structural signals. While many guiding mechanisms focus on 2D structural patterns or 3D biochemical gradients, injectable material platforms that elucidate how cellular processes are triggered by defined 3D physical guiding cues are still lacking but crucial for the repair of soft tissues. Herein, a recently developed anisotropic injectable hybrid hydrogel (Anisogel) contains rod-shaped microgels that orient in situ by a magnetic field and has propelled studying 3D cell guidance. Here, the Anisogel is used to investigate the dependence of axonal guidance on microgel dimensions, aspect ratio, and distance. While large microgels result in high material anisotropy, they significantly reduce neurite outgrowth and thus the guidance efficiency. Narrow and long microgels enable strong axonal guidance with maximal outgrowth including cell sensing over distances of tens of micrometers in 3D. Moreover, nerve cells decide to orient inside the Anisogel within the first three days, followed by strengthening of the alignment, which goes along with oriented fibronectin deposition. These findings demonstrate the potential of the Anisogel to tune structural and mechanical parameters for specific applications. © 2020 The Authors. Published by Wiley-VCH GmbH
- ItemDigitally Fabricated and Naturally Augmented In Vitro Tissues(Weinheim : Wiley-VCH, 2020) Duarte Campos, Daniela F.; De Laporte, LauraHuman in vitro tissues are extracorporeal 3D cultures of human cells embedded in biomaterials, commonly hydrogels, which recapitulate the heterogeneous, multiscale, and architectural environment of the human body. Contemporary strategies used in 3D tissue and organ engineering integrate the use of automated digital manufacturing methods, such as 3D printing, bioprinting, and biofabrication. Human tissues and organs, and their intra- and interphysiological interplay, are particularly intricate. For this reason, attentiveness is rising to intersect materials science, medicine, and biology with arts and informatics. This report presents advances in computational modeling of bioink polymerization and its compatibility with bioprinting, the use of digital design and fabrication in the development of fluidic culture devices, and the employment of generative algorithms for modeling the natural and biological augmentation of in vitro tissues. As a future direction, the use of serially linked in vitro tissues as human body-mimicking systems and their application in drug pharmacokinetics and metabolism, disease modeling, and diagnostics are discussed. © 2020 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH
- ItemControlling Structure with Injectable Biomaterials to Better Mimic Tissue Heterogeneity and Anisotropy(Weinheim : Wiley-VCH, 2021) Babu, Susan; Albertino, Filippo; Omidinia-Anarkoli, Abdolrahman; De Laporte, LauraTissue regeneration of sensitive tissues calls for injectable scaffolds, which are minimally invasive and offer minimal damage to the native tissues. However, most of these systems are inherently isotropic and do not mimic the complex hierarchically ordered nature of the native extracellular matrices. This review focuses on the different approaches developed in the past decade to bring in some form of anisotropy to the conventional injectable tissue regenerative matrices. These approaches include introduction of macroporosity, in vivo pattering to present biomolecules in a spatially and temporally controlled manner, availability of aligned domains by means of self-assembly or oriented injectable components, and in vivo bioprinting to obtain structures with features of high resolution that resembles native tissues. Toward the end of the review, different techniques to produce building blocks for the fabrication of heterogeneous injectable scaffolds are discussed. The advantages and shortcomings of each approach are discussed in detail with ideas to improve the functionality and versatility of the building blocks. © 2021 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH
- ItemAnisometric Microstructures to Determine Minimal Critical Physical Cues Required for Neurite Alignment(Weinheim : Wiley-VCH, 2021) Vedaraman, Sitara; Perez-Tirado, Amaury; Haraszti, Tamas; Gerardo-Nava, Jose; Nishiguchi, Akihiro; De Laporte, LauraIn nerve regeneration, scaffolds play an important role in providing an artificial extracellular matrix with architectural, mechanical, and biochemical cues to bridge the site of injury. Directed nerve growth is a crucial aspect of nerve repair, often introduced by engineered scaffolds imparting linear tracks. The influence of physical cues, determined by well-defined architectures, has been mainly studied for implantable scaffolds and is usually limited to continuous guiding features. In this report, the potential of short anisometric microelements in inducing aligned neurite extension, their dimensions, and the role of vertical and horizontal distances between them, is investigated. This provides crucial information to create efficient injectable 3D materials with discontinuous, in situ magnetically oriented microstructures, like the Anisogel. By designing and fabricating periodic, anisometric, discreet guidance cues in a high-throughput 2D in vitro platform using two-photon lithography techniques, the authors are able to decipher the minimal guidance cues required for directed nerve growth along the major axis of the microelements. These features determine whether axons grow unidirectionally or cross paths via the open spaces between the elements, which is vital for the design of injectable Anisogels for enhanced nerve repair. © 2021 The Authors. Advanced Healthcare Materials published by Wiley-VCH GmbH
- ItemCellulose Nanofibril Hydrogel Promotes Hepatic Differentiation of Human Liver Organoids(Weinheim : Wiley-VCH, 2020) Krüger, Melanie; Oosterhoff, Loes A.; van Wolferen, Monique E.; Schiele, Simon A.; Walther, Andreas; Geijsen, Niels; De Laporte, Laura; van der Laan, Luc J.W.; Kock, Linda M.; Spee, BartTo replicate functional liver tissue in vitro for drug testing or transplantation, 3D tissue engineering requires representative cell models as well as scaffolds that not only promote tissue production but also are applicable in a clinical setting. Recently, adult liver-derived liver organoids are found to be of much interest due to their genetic stability, expansion potential, and ability to differentiate toward a hepatocyte-like fate. The current standard for culturing these organoids is a basement membrane hydrogel like Matrigel (MG), which is derived from murine tumor material and apart from its variability and high costs, possesses an undefined composition and is therefore not clinically applicable. Here, a cellulose nanofibril (CNF) hydrogel is investigated with regard to its potential to serve as an alternative clinical grade scaffold to differentiate liver organoids. The results show that its mechanical properties are suitable for differentiation with overall, either equal or improved, functionality of the hepatocyte-like cells compared to MG. Therefore, and because of its defined and tunable chemical definition, the CNF hydrogel presents a viable alternative to MG for liver tissue engineering with the option for clinical use. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim