2014, Kohrt, C., Spannenberg, A., Werner, T.

In the crystal structure of the title salt, C2H 8NO+·I-, N-H⋯O, N-H⋯I and O-H⋯I hydrogen bonds lead to the formation of layers staggered along the c axis.

2014, Gonzalez-Gago, C., Smid, P., Hofmann, T., Venzago, C., Hoffmann, V., Gruner, W.

The performance of glow discharge optical emission spectroscopy and mass spectrometry for oxygen determination is investigated using a set of new conductive samples containing oxygen in the percent range in three different matrices (Al, Mg, and Cu) prepared by a sintering process. The sputtering rate corrected calibrations obtained at standard conditions for the 4 mm anode (700 V, 20 mA) in GD-OES are matrix independent for Mg and Al but not for Cu. The importance of a "blue shifted" line of oxygen at 130.22 nm (first reported by Köster) for quantitative analyses by GD-OES is confirmed. Matrix-specific calibrations for oxygen in GD-MS are presented. Two source concepts - fast flow (ELEMENT GD) and low gas flow (VG9000) - are evaluated obtaining higher sensitivity with the static flow source. Additional experiments using Ar-He mixtures or μs pulsed GD are carried out in ELEMENT GD aiming to improve the oxygen sensitivity.

2014, Stagl, J., Mayr, E., Koch, H., Hattermann, F.F., Huang, S.

For the management of protected areas knowledge about the water regime plays a very important role, in particular in areas with lakes, wetlands, marches or floodplains. The local hydrological conditions depend widely on temporal and spatial variations of the main components of the hydrologic cycle and physiographic conditions on site. To preserve a favourable conservation status under changing climatic conditions park managers require information about potential impacts of climate change in their area. The following chapter provides an overview of how climate change affects the hydrological regimes in Central and Eastern Europe. The hydrological impacts for the protected areas are area-specific and vary from region to region. Generally, an increase in temperature enhances the moisture holding capacity of the atmosphere and thus, leads to an intensification of the hydrological cycle. Key changes in the hydrological system include alterations in the seasonal distribution, magnitude and duration of precipitation and evapotranspiration. This may lead to changes in the water storage, surface runoff, soil moisture and seasonal snow packs as well as to modifications in the mass balance of Central European glaciers. Partly, water resources management can help to counterbalance effects of climate change on stream flow and water availability.

2014, Gowrisankar, S., Neumann, H., Spannenberg, A., Beller, M.

The title compound, [RuN4(-6-C6H6) (C12H22ClP)]-CHCl3, was prepared by reaction of [RuN 4(-6-C6H6)]2 with chlorodicyclohexyl phosphane in CHCl3 at 323 K under argon. The RuII atom is surrounded by one arene ligand, two Cl atoms and a phosphane ligand in a piano-stool geometry. The phosphane ligand is linked by the P atom, with an Ru-P bond length of 2.3247 (4) Å. Both cyclohexyl rings at the P atom adopt a chair conformation. In the crystal, the RuII complex molecule and the chloroform solvent molecule are linked by a bifurcated C-H⋯(Cl,Cl) hydrogen bond. Intramolecular C-H⋯Cl hydrogen bonds are also observed.

2014, Becker, L., Spannenberg, A., Arndt, P., Rosenthal, U.

In the title compound, [Zr(C10H15)2(C14H12NO)(CN)], the ZrIV atom is coordinated by two pentamethylcyclopentadienyl ligands, the amidate ligand via the N and O atoms, and an additional C N ligand. The four-membered metallacycle is nearly planar (r.m.s. deviation = 0.008Å). In the crystal, the molecules are connected into centrosymmetric dimers via pairs of N - HN hydrogen bonds.

2014, Schwenkbier, Lydia, Pollok, Sibyll, König, Stephan, Urban, Matthias, Werres, Sabine, Cialla-May, Dana, Weber, Karina, Popp, Jürgen

Rapid detection and accurate identification of plant pathogens in the field is an ongoing challenge. In this study, we report for the first time on the development of a helicase-dependent isothermal amplification (HDA) in combination with on-chip hybridization for the detection of selected Phytophthora species. The HDA approach allows efficient amplification of the yeast GTP-binding protein (Ypt1) target gene region at one constant temperature in a miniaturized heating device. The assay's specificity was determined by on-chip DNA hybridization and subsequent silver nanoparticle deposition. The silver deposits serve as stable endpoint signals that enable the visual as well as the electrical readout. Our promising results point to the direction of a near future on-site application of the combined techniques for a reliable detection of Phytophthora species.

2014, Gowrisankar, S., Neumann, H., Spannenberg, A., Beller, M.

The title compound, [Ru(CO3)(η6-C 6H6){(C6H11)2P(CH 2-C10H7)}]-3CHCl3, was synthesized by carbonation of [RuCl2-(η6-C6H 6){(C6H11)2P(CH2C 10H7)}] with NaHCO3in methanol at room temperature. The RuIIatom is surrounded by a benzene ligand, a chelating carbonate group and a phosphane ligand in a piano-stool configuration. The crystal packing is consolidated by C-H⋯O and C-H⋯Cl hydrogen-bonding interactions between adjacent metal complexes and between the complexes and the solvent molecules. The asymmetric unit contains one metal complex and three chloroform solvent molecules of which only one was modelled. The estimated diffraction contributions of the other two strongly disordered chloroform solvent molecules were substracted from the observed diffraction data using the SQUEEZE procedure in PLATON.

2014, Krause, Beate, Pötschke, Petra, Gohs, U.

Polymer modification with high energy electrons (EB) is well established in different applications for many years. It is used for crosslinking, curing, degrading, grafting of polymeric materials and polymerisation of monomers. In contrast to this traditional method, electron induced reactive processing (EIReP) combines the polymer modification with high energy electrons and the melt mixing process. This novel reactive method was used to prepare polymer blends and composites. In this study, both methods were used for the preparation of polyethylene (PE)/ multiwalled carbon nanotubes (MWCNT) composites in the presence of a coupling agent. The influence of MWCNT and type of electron treatment on the gel content, the thermal conductivity, rheological, and electrical properties was investigated whereby as-grown and oxidised MWCNT were used. In the presence of a coupling agent and at an absorbed dose of 40 kGy, the gel content increased from 57 % for the pure PE to 74 % or 88 % by the addition of as-grown (Baytubes® C150P) or oxidised MWCNT, respectively. In comparison to the composites containing the as-grown MWCNTs, the use of the oxidised MWCNTs led to higher melt viscosity and higher storage modulus due to higher yield of filler polymer couplings. The melt viscosity increased due to the addition of MWCNT and crosslinking of PE. The thermal conductivity increased to about 150 % and showed no dependence on the kind of MWCNT and the type of electron treatment. In contrast, the lowest value of electrical volume resistivity was found for the non-irradiated samples and after state of the art electron treatment without any influence of the type of MWCNT. In the case of EIReP, the volume resistivity increased by 2 (as-grown MWCNT) or 3 decades (oxidised MWCNT) depending on the process parameters. © 2014 American Institute of Physics.

2014, Bogusz, A., Müller, A.D., Blaschke, D., Skorupa, I., Bürger, D., Scholz, A., Schmidt, O.G., Schmidt, H.

We report a unipolar, nonvolatile resistive switching in polycrystalline YMnO3 thin films grown by pulsed laser deposition and sandwiched between Au top and Ti/Pt bottom electrodes. The ratio of the resistance in the OFF and ON state is larger than 103. The observed phenomena can be attributed to the formation and rupture of conductive filaments within the multiferroic YMnO3 film. The generation of conductive paths under applied electric field is discussed in terms of the presence of grain boundaries and charged domain walls inherently formed in hexagonal YMnO3. Our findings suggest that engineering of the ferroelectric domains might be a promising route for designing and fabrication of novel resistive switching devices.

2014, Haehnel, M., Spannenberg, A., Rosenthal, U.

The title dinuclear half-sandwich complex, [CpTi(OCH=CH2) (μ2-N-iPr)]2 (Cp = cyclopentadienyl; iPr = isopropyl), was obtained from the reaction of Cp2TiCl2, n-butyllithium and isopropylamine in tetrahydrofuran. Each TiIV atom is coordinated by one Cp ligand, one vinyloxy unit and two bridging imido groups in a strongly distorted tetrahedral geometry. There are two half molecules in the asymmetric unit, such that whole molecules being generated by inversion symmetry.