66 results
Search Results
Now showing 1 - 10 of 66
- ItemIncreased static dielectric constant in ZnMnO and ZnCoO thin films with bound magnetic polarons(London : Nature Publishing Group, 2020) Vegesna, S.V.; Bhat, V.J.; Bürger, D.; Dellith, J.; Skorupa, I.; Schmidt, O.G.; Schmidt, H.A novel small signal equivalent circuit model is proposed in the inversion regime of metal/(ZnO, ZnMnO, and ZnCoO) semiconductor/Si3N4 insulator/p-Si semiconductor (MSIS) structures to describe the distinctive nonlinear frequency dependent capacitance (C-F) and conductance (G-F) behaviour in the frequency range from 50 Hz to 1 MHz. We modelled the fully depleted ZnO thin films to extract the static dielectric constant (εr) of ZnO, ZnMnO, and ZnCoO. The extracted enhancement of static dielectric constant in magnetic n-type conducting ZnCoO (εr ≥ 13.0) and ZnMnO (εr ≥ 25.8) in comparison to unmagnetic ZnO (εr = 8.3–9.3) is related to the electrical polarizability of donor-type bound magnetic polarons (BMP) in the several hundred GHz range (120 GHz for CdMnTe). The formation of donor-BMP is enabled in n-type conducting, magnetic ZnO by the s-d exchange interaction between the electron spin of positively charged oxygen vacancies Vo+ in the BMP center and the electron spins of substitutional Mn2+ and Co2+ ions in ZnMnO and ZnCoO, respectively. The BMP radius scales with the Bohr radius which is proportional to the static dielectric constant. Here we show how BMP overlap can be realized in magnetic n-ZnO by increasing its static dielectric constant and guide researchers in the field of transparent spintronics towards ferromagnetism in magnetic, n-ZnO.
- ItemA Dual-Mode Surface Acoustic Wave Delay Line for the Detection of Ice on 64°-Rotated Y-Cut Lithium Niobate(Basel : MDPI, 2024) Schulmeyer, Philipp; Weihnacht, Manfred; Schmidt, HagenIce accumulation on infrastructure poses severe safety risks and economic losses, necessitating effective detection and monitoring solutions. This study introduces a novel approach employing surface acoustic wave (SAW) sensors, known for their small size, wireless operation, energy self-sufficiency, and retrofit capability. Utilizing a SAW dual-mode delay line device on a 64°-rotated Y-cut lithium niobate substrate, we demonstrate a solution for combined ice detection and temperature measurement. In addition to the shear-horizontal polarized leaky SAW, our findings reveal an electrically excitable Rayleigh-type wave in the X+90° direction on the same cut. Experimental results in a temperature chamber confirm capability for reliable differentiation between liquid water and ice loading and simultaneous temperature measurements. This research presents a promising advancement in addressing safety concerns and economic losses associated with ice accretion.
- ItemThe boson peak and the first sharp diffraction peak in (As2S3)x(GeS2)1–x glasses(Kyiv : Inst. of Semiconductor Physics, 2021) Stronski, A.V.; Kavetskyy, T.S.; Revutska, L.O.; Kaban, I.; Jóvári, P.; Shportko, K.V.; Sergienko, V.P.; Popovych, M.V.The parameters of the boson peak (BP) and the first sharp diffraction peak (FSDP) in (As2S3)x(GeS2)1x glasses measured using high-resolution Raman spectroscopy and high-energy synchrotron X-ray diffraction measurements are examined as a function of x. It has been found that there is no correlation between the positions of BP and FSDP. The BP position shows a nonlinear composition behavior with a maximum at about x = 0.4, whereas the FSDP position changes virtually linearly with x. The intensities of both BP and FSDP show nonlinear composition dependences with the slope changes at x = 0.4, although there is no direct proportionality. Analysis of the partial structure factors for the glasses with x = 0.2, 0.4 and 0.6 obtained in another study has shown that the cation-cation atomic pairs of Ge–Ge, Ge–As and As–As make the largest contribution to FSDP, where the Ge–Ge and Ge–As pairs are dominant.
- ItemDressed j eff-1/2 objects in mixed-valence lacunar spinel molybdates(London : Nature Publishing Group, 2023) Petersen, Thorben; Prodan, Lilian; Geirhos, Korbinian; Nakamura, Hiroyuki; Kézsmárki, István; Hozoi, LiviuThe lacunar-spinel chalcogenides exhibit magnetic centers in the form of transition-metal tetrahedra. On the basis of density-functional computations, the electronic ground state of an Mo413+ tetrahedron has been postulated as single-configuration a12 e4 t25, where a1, e, and t2 are symmetry-adapted linear combinations of single-site Mo t2g atomic orbitals. Here we unveil the many-body tetramer wave-function: we show that sizable correlations yield a weight of only 62% for the a12 e4 t25 configuration. While spin–orbit coupling within the peculiar valence orbital manifold is still effective, the expectation value of the spin–orbit operator and the g factors deviate from figures describing nominal t5jeff = 1/2 moments. As such, our data documents the dressing of a spin–orbit jeff = 1/2 object with intra-tetramer excitations. Our results on the internal degrees of freedom of these magnetic moments provide a solid theoretical starting point in addressing the intriguing phase transitions observed at low temperatures in these materials.
- ItemLong-range magnetic order in the ~S=1/2 triangular lattice antiferromagnet KCeS2(Amsterdam : SciPost Foundation, 2020) Bastien, Gaël; Rubrecht, Bastian; Haeussler, Ellen; Schlender, Philipp; Zangeneh, Ziba; Avdoshenko, Stanislav; Sarkar, Rajib; Alfonsov, Alexey; Luther, Sven; Onykiienko, Yevhen A.; Walker, Helen C.; Kühne, Hannes; Grinenko, Vadim; Guguchia, Zurab; Kataev, Vladislav; Klauss, Hans-Henning; Hozoi, Liviu; van den Brink, Jeroen; Inosov, Dmytro S.; Büchner, Bernd; Wolter, Anja U.B.; Doert, ThomasRecently, several putative quantum spin liquid (QSL) states were discovered in ~S=1/2 rare-earth based triangular-lattice antiferromagnets (TLAF) with the delafossite structure. A way to clarify the origin of the QSL state in these systems is to identify ways to tune them from the putative QSL state towards long-range magnetic order. Here, we introduce the Ce-based TLAF KCeS2 and show via low-temperature specific heat and μSR investigations that it yields magnetic order below TN=0.38 K despite the same delafossite structure. We identify a well separated ~S=1/2 ground state for KCeS2 from inelastic neutron scattering and embedded-cluster quantum chemical calculations. Magnetization and electron spin resonance measurements on single crystals indicate a strong easy-plane g~factor anisotropy, in agreement with the ab initio calculations. Finally, our specific-heat studies reveal an in-plane anisotropy of the magnetic field-temperature phase diagram which may indicate anisotropic magnetic interactions in KCeS2.
- ItemXPS chemical state analysis of sputter depth profiling measurements for annealed TiAl-SiO2 and TiAl-W layer stacks(Chichester [u.a.] : Wiley, 2020) Oswald, Steffen; Lattner, Eric; Seifert, MariettaFor the application of surface acoustic wave sensors at high temperatures, both a high-temperature stable piezoelectric substrate and a suitable metallization for the electrodes are needed. Our current attempt is to use TiAl thin films as metallization because this material is also known to be high temperature stable. In this study, Ti/Al multilayers and Ti-Al alloy layers were prepared in combination with an SiO2 cover layer or a W barrier layer at the interface to the substrate (thermally oxidized Si or Ca3TaGa3Si2O14) as an oxidation protection. To form the high-temperature stable γ-TiAl phase and to test the thermal stability of the layer systems, thermal treatments were done in vacuum at several temperatures. We used X-ray photoelectron spectroscopy (XPS) sputter depth-profiling to investigate the film composition and oxidation behavior. In this paper, we demonstrate how the semiautomatic peak fitting can help to extract beside the elemental information also the chemical information from the measured depth profiles. © 2020 The Authors. Surface and Interface Analysis published by John Wiley & Sons Ltd
- ItemOn Curie temperature of B20-MnSi films([London] : Macmillan Publishers Limited, part of Springer Nature, 2022) Li, Zichao; Yuan, Ye; Begeza, Viktor; Rebohle, Lars; Helm, Manfred; Nielsch, Kornelius; Prucnal, Slawomir; Zhou, ShengqiangB20-type MnSi is the prototype magnetic skyrmion material. Thin films of MnSi show a higher Curie temperature than their bulk counterpart. However, it is not yet clear what mechanism leads to the increase of the Curie temperature. In this work, we grow MnSi films on Si(100) and Si(111) substrates with a broad variation in their structures. By controlling the Mn thickness and annealing parameters, the pure MnSi phase of polycrystalline and textured nature as well as the mixed phase of MnSi and MnSi1.7 are obtained. Surprisingly, all these MnSi films show an increased Curie temperature of up to around 43 K. The Curie temperature is likely independent of the structural parameters within our accessibility including the film thickness above a threshold, strain, cell volume and the mixture with MnSi1.7. However, a pronounced phonon softening is observed for all samples, which can tentatively be attributed to slight Mn excess from stoichiometry, leading to the increased Curie temperature.
- ItemIn Situ N-Doped Graphene and Mo Nanoribbon Formation from Mo2Ti2C3 MXene Monolayers(Weinheim : Wiley-VCH, 2020) Mendes, Rafael Gregorio; Ta, Huy Quang; Yang, Xiaoqin; Li, Wei; Bachmatiuk, Alicja; Choi, Jin-Ho; Gemming, Thomas; Anasori, Babak; Lijun, Liu; Fu, Lei; Liu, Zhongfan; Rümmeli, Mark HermannSince the advent of monolayered 2D transition metal carbide and nitrides (MXenes) in 2011, the number of different monolayer systems and the study thereof have been on the rise. Mo2Ti2C3 is one of the least studied MXenes and new insights to this material are of value to the field. Here, the stability of Mo2Ti2C3 under electron irradiation is investigated. A transmission electron microscope (TEM) is used to study the structural and elemental changes in situ. It is found that Mo2Ti2C3 is reasonably stable for the first 2 min of irradiation. However, structural changes occur thereafter, which trigger increasingly rapid and significant rearrangement. This results in the formation of pores and two new nanomaterials, namely, N-doped graphene membranes and Mo nanoribbons. The study provides insight into the stability of Mo2Ti2C3 monolayers against electron irradiation, which will allow for reliable future study of the material using TEM. Furthermore, these findings will facilitate further research in the rapidly growing field of electron beam driven chemistry and engineering of nanomaterials. © 2020 The Authors. Published by WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim
- ItemV4 tetrahedral units in AV4X8 lacunar spinels: Near degeneracy, charge fluctuations, and configurational mixing within a valence space of up to 21 d orbitals(2020) Hozoi, L.; Eldeeb, M.S.; Rößler, U.K.All properties of a given molecule or solid are determined by the way valence electrons are distributed over single-particle energy levels. For multiple, closely spaced single-particle levels, different occupation patterns may provide many-electron quantum states that are close in energy, interact, and admix. We address such near-degeneracy electron correlation effects for V4 vanadium tetrahedral units as encountered in the lacunar spinel GaV4S8, explicitly taking into account up to 21 vanadium valence orbitals, and find effective orbital occupation numbers much different as compared to the picture previously laid out on the basis of mean-field calculations. In light of these results, a modified theoretical frame seems necessary to explain the peculiar magnetic properties of lacunar spinels and of related compounds.
- ItemTribocorrosion behavior of β-type Ti-Nb-Ga alloys in a physiological solution(Amsterdam [u.a.] : Elsevier Science, 2023) Alberta, Ludovico Andrea; Vishnu, Jithin; Douest, Yohan; Perrin, Kevin; Trunfio-Sfarghiu, Ana-Maria; Courtois, Nicolas; Gebert, Annett; Ter-Ovanessian, Benoit; Calin, MarianaTribo-electrochemical behavior in physiological solution of two β-type (100-x)(Ti-45Nb)-xGa (x = 4, 8 wt%) alloys, alongside β-Ti-45Nb and medical grade Ti-6Al-4V ELI, was investigated. Microstructure and mechanical behavior were evaluated by X-ray diffraction, microhardness and ultrasonic method. Tribocorrosion tests (open circuit potential, anodic potentiostatic tests) were performed using a reciprocating pin-on-disk tribometer under constant load. Degradation mechanisms are similar for the alloys: plastic deformation, delamination, abrasive and adhesive wear. Among the β-Ti-Nb alloys, an improved wear resistance with lower damage was remarked for β-92(Ti-45Nb)-8Ga alloy, attributed to increased microhardness. Content of Ga3+ ions released in the test solutions were found to be in very low amounts (few ppb). Addition of Ga to Ti-45Nb resulted in improved corrosion resistance under mechanical loading.